Welding Inspector Mechanical Engineer
Resume:
Career Objective:
Educational Qualification:
Technical Expertise:
Computer Proficiency:
Syed Junaid Ahmed
QC WELDING INSPECTOR
************@*****.***
To obtain a challenging position in a leading company, this position should offer Security, development, and recognition in exchange of dedication, maximum efforts and best performance utilizing my knowledge and experience.
• B. Tech (Mechanical Engineering), JNTUH, T.S. INDIA
• Certified CSWIP 3.1 Welding Inspector, TWI Cambridge, U.K
• Certificate number: 502152 (DOB: 20-04-1998)
ASNT NDT Level - II:
• Dye-Penetrate Testing
• Magnetic Particle Testing
• Radiographic Testing
• Ultrasonic Testing
• Visual Testing
Operating System: MS-Dos, Windows 98/2000/XP/Sec/Vista, Network sharing, etc Packages: MS-OFFICE.
Software (Mech.): AUTO-CAD
Page 2 of 5
Knowledge of International Codes & Standards:
Work Experience:
• Excellent ability to lead a team of supervisors, charge hands and skilled /unskilled workers.
• Can work efficiently as an individual or a team.
• Good interpersonal and public relation skills.
• Enjoy responsibility and challenges.
• Successfully execution of projects as a post Mechanical Engineer for all Mechanical Services.
• Well verse with engineer drawings and principles.
• ASME B 31.3, for process piping
• ASME section V for NDT Examination
• ASME section IX for Welder Qualification & Procedures.
• ASME section II part C for specification of electrodes & Fillers.
• API 650 construction of oil storage tank. Company Recommended Standards, Procedures & Specifications
Designation : QC Mechanical /Welding
Client : Amaala Red Sea.KSA
Company : Rawabi Specialized contracting co.
Duration : Dec 2024 Up to Aug 2025
Designation : QC Mechanical / Welding
Client : Royal Commission Jubail.
Company : Rawabi Specialized contracting co.
Duration : Jul 2023 Up to Dec 2024
Designation : QC Welding Inspector
Client : MBL Project, KSA
Company : TUV
Duration : Jan 2023 - April 2023
Designation : QC Welding Inspector
Client : maaden (Shutdown)
Company : Kanooz, KSA
Duration : Aug 2022 -Dec 2022
Key skill
Page 3 of 5
Designation : Mechanical Engineer
Company : Gamma weld inspection services, Hyderabad-India Duration : Feb 2021 - Jun 2022
Job Responsibilities:
• Go through quality related documents, i.e. approved Quality Control Procedures (QCP), Welding Procedure Specification (WPS), applicable drawings, technical specifications, and standard codes such as ASME, ASNT, API, & project standard.
• Effective maintain and implement of all the Quality control procedure in the project.
• Ensuring that all approved QC Inspection team are continuously checking and monitoring all work activities.
• Managing and leading the QC team (Welding and Piping).
• Continuously update Welding Engineer on project requirements to technically support them in the preparation of procedure qualification (PQR) test, Welder Performance Qualification various processes
(SMAW, GTAW). Provide training and technical guidance to inspection personnel.
• Maintaining WPS, PQR and WQT used by the contractors and updating regularity. Closely monitoring the weekly weld repair rate of each welder. Procedure Qualification Record (PQR) as per ASME Sec IX and B31.3.
• To ensure construction follows all the related Client standards and procedures during all the construction activities.
• Receiving Inspection and verification of welding consumables for Mechanical properties, type, source, segregation, storage, issue and handling etc...
•
• Witnessing and verification PMI of Stainless-Steel consumables (as required).
• Surveillance of welding consumable control store to monitor storage, handling, drying, and conditioning.
• Witnessing and Confirm welding equipment and instruments are calibrated.
• Monitor welding ovens, baking, holding and quivers (portable) ovens calibrations records.
• Inspection and Confirm electrode, filler wire and inert gases are specified and acceptable.
• Inspection and verifying the preheat equipment and temperature.
• Verification of welding process, welder and consumables as per approved WPS.
• Inspect and confirm joint fit-up, joint configuration, cleanliness and dimensions are acceptable and correct.
• Surveillance to Confirm welding parameters and techniques are supported by the WPS.
•
• Monitored in-process welding parameters such as ampere, voltage, travel speed, heat input, weaving, preheat & inter-pass temperature requirements.
• Inspection to ensure gap control for socket joints and seal welding for thread covering.
• Post welding visual inspection of completed welds for any visual weld defects or discontinuity. Page 4 of 5
• Visual examination of root passes, penetration, undercut, cracks, slag and porosity. Check completed joints for excessive reinforcement and other surface irregularities.
•
• Witnessing and verifying modification or rework after weld acceptance to ensure compliance with revised drawings.
• Conducted Weld visual inspection and review daily welding reports.
• In-Depth verification of Repairs concluding the root cause, working out with the assigned welding inspector for proper surveillance of welder performances.
•
• Inspected various materials such as CS, LTCS, Alloy, CU-NI, Stainless Steels Inconel, Incoly and CRA according to QCP, ITP & WPS.
•
• Handled Welding Process: - GTAW, SMAW and FCAW.
•
• Witnessing Repair work of Weld joints to ensure work is carried out in accordance with approved procedure.
• Witnessing PT, UT, MT, MPI and ensures that required NDE has been covered as per the project specification.
• Maintain a logbook for all reports, inspections and tests including date, time and results of Calibration certificates.
• Issuing NCR’s when non-conformity activities were noted by the subcontractors or contraction team.
• Provide Toolbox meetings on site / shop for welders and fitters for proper fit up, welding and explain them to Quality requirements of the Project.
• Preparation of RFI for final inspection to client inspector in timely manners as per ITP’s and coordinating with him about to all issues.
• Coordinating with client/consultants while the inspection is being carried out and offering any clarification is required.
• Conduct line checking of pipeline and prepare punch lists works for system packages before hydro-test, pneumatic test or service test.
• Witness for the hydro test, service test, and pneumatic test of various systems as per the approved procedure and code specification and offering to the client/consultant to witness the test.
• Witness for hydro test of different type of valves (Gate Valve, Globe Valve, Butterfly Valve, and different types of Control Valve.
• Organizing and coordinating all necessary items and activities for hydro testing of completed lines including cleaning, flushing, drying, lay-up, and reinstatement.
• Verification of closed punch items and conduct walk through for each completed piping system prior to mechanical acceptance.
• Annular plates. Bottom plates. roof plates Lying and fit up inspection
• Inspection of Shell plate vertical fit up and horizontal fit up
• Modifications of tank with Shell plates patches fit up inspection
• Inspection of nozzle orientation and fit up inspection with RF pads
• Carry inspection of peaking and banding of Shell plates
• Check verifies the plumpness and ovality of the vertical storage tank with application codes Page 5 of 5
• Carry out RF pads pneumatic test bottom and roof plates. vacuum box testing
• Carry out inspection oil penetrating test or MPI test for Shell plates with bottom plate fillet weld
• The PT of Shell plates vertical and circumference seem back chipping inspection
• Review of the RT film of Shell vertical and circumference seam weld joint
• Carry out Hydro test with full water as per client requirements Personal Profile:
Nationality : Indian
Iqama Status : Transferable
Languages : English, Hindi, & Urdu
Contact this candidate