Supplier & Quality Manager
Resume:
Sascha Kauderer
*******************@*****.***
Resume
OBJECTIVE
Supplier Quality and Process Management professional with over 25 years of experience in aerospace and automotive industries. Specialized in ISO 9001, ISO 19011 auditing, Six Sigma Black Belt, and supplier development. Proven expertise in implementing quality systems, conducting global supplier audits, and leading teams to achieve continuous improvement. Authorized to work in the USA under E-2 visa.
CORE COMPETENCIES
• Supplier Quality
Management
• ISO 9001/ISO 19011
Auditing
• Leadership & Training
• Supplier Development &
Risk Management
• Aerospace & Automotive
Compliance
• Six Sigma Black Belt (Lean, CIP,
Process Improvement)
PROFESSIONAL EXPERIENCE
01/07/2023 Self-employed consultant in the field of quality & supplier management
SK Quality Consulting
Sarasota, Florida USA
Main activities:
• Customer support with a special focus on Quality and supplier management
• Consulting
• Audits (intern, extern)
• Handling of documents (e.g., Handbook, WD, Requirements)
• Handling of complaints
• Create analyze
01/12/2022-30/06/2023 Supplier Manager
Schletter Solar Group GmbH
Kirchdorf bei Haag, Germany
Main activities:
• Carrying out supplier audits on site for products and processes. Aluminium & plastics product group, focus on India
• Quality CIP
• Conduct training courses for employees & suppliers
• Handling of internal documents
• Create approval documents
• Conduct training courses for employees
Sascha Kauderer
8140 Enclave Way
34243 Sarasota, Florida, USA
*******************@*****.***
01/09/2019-30/11/2022 Quality Management & Certifying Staff AAT-Air Ambulance Technology GmbH
Ranshofen, Austria
Main activities:
• Conducted on site supplier audits for products and processes
• handling of complaints, approvals and documents (e.g., CoC, CoA)
• Quality CIP
• Conduct training courses for employees
• Certifying Staff Part 21G
• Quality Assurance
• Deputy Quality manager
• Handling of internal documents
• Create approval documents (e.g., EASA FORM 1, SOC, COC) 01/09/2018-01/08/2019 ACE Consulting
General Information:
I was employed by 2 companies for short-term projects, the tasks were divided as follows:
Project I, period: 8 months (01/2019-08/2019)
Target: Implementation of a new supplier system (achieved) Supplier Manager Quality Assurance
A-Kaiser GmbH
Aicha vorm Wald, Germany
Main activities:
• Conducted on site supplier audits for products and processes
(e.g., ISO 9001, IATF 16949)
• Quality CIP
• Leaner processes, process flows
• Organization and Management of the entire supplier base to monitor and improve supplier performance
• Advanced development of the supplier system
• Creation of documents/updates: QSV, NDA etc.
Sascha Kauderer
8140 Enclave Way
34243 Sarasota, Florida, USA
*******************@*****.***
Project II, period: 3 months (09/2018-12/2018)
Implementation of a supplier system using SAP (achieved) Supplier Manager Quality Assurance
GROB Aircraft SE
Tussenhausen, Germany
Main activities:
• Conducted on site supplier audits for products and processes
(e.g., ISO 9001, EN9120)
• Creation of documents/updates: Work Instructions/NDA etc.
• Advanced development of the supplier system
01/03/2016-31/08/2018 Head of finishing Departement & Deputy QM Kunststoffverarbeitung Wimmer GmbH
Traunstein, Germany
Main activities:
• Production planning
• Quality assurance and QMB representative
• Internal Audits (e.g., ISO 9001, ISO 14001, ISO 27001)
• Technical and disciplinary leadership for all employees of the finishing department
• Continuous improvement process CIP
implementation of a paternoster in the production to optimize working routes.
Implementation of a separate room for the machinery which was previously in production (due to a lot of noise and dirt).
Introduction, creation and implementation of
procedural instructions and work instructions.
• Process planning for trainees and new employees, training courses and instructions e.g., for new projects
Sascha Kauderer
8140 Enclave Way
34243 Sarasota, Florida, USA
*******************@*****.***
01/02/2014-28/02/2016 PQA – Procurement Quality Assurance FACC Operations GmbH
Sankt Martin / Ried im Innkreis, Austria
Main activities:
• Conducted on site supplier audits for products and processes
(e.g., ISO 9001, EN9120)
• Handling of complaints, approvals and documents (e.g., CoC, CoA)
I have collected more than 50.000 € of complaints (1 of over 40 Suppliers) on average per year. I was able to reduce the complaint rate by 17%.
• Supplier management in my commodities:
(standard parts, paint, sealant, dangerous goods)
01/09/2010-31/01/2014 Process Technician for Plastics and Rubber Engineering Focus: Fibre-Reinforced Composite
FACC Operations GmbH
Sankt Martin / Ried im Innkreis, Austria
Main activities:
• Laminating of parts (e.g., Gulfstream IV-X, Boing 777, Airbus A320-A380, Bombardier CS-family)
• CIP and thus saved one employee in the process with the same work performance
• Deputising for the foreman on the project, so I instructed my colleagues and trained new employees
01/10/2006-30/09/2007 Process Technician for Plastics and Rubber Engineering Focus: Fibre-Reinforced Composite
Becker Carbon GmbH
Neuhausen/Germany
Main activities:
• Laminating of parts (e.g., KTM, Torro Rosso, BMW, Ducati, Rhein Metal)
• Project management (up to 10 employees in different departments)
• Training management (2 apprentices)
• manufacturing of parts, with prototypes everything made. from laminating to cutting, finishing and
measuring of parts
• CIP
Sascha Kauderer
8140 Enclave Way
34243 Sarasota, Florida, USA
*******************@*****.***
01/08/2003-30/08/2010 Self-employed as Process Technician for Plastics and Rubber Engineering Focus: Fibre-Reinforced Composite
SWAK Carbon
&
Self-employed as Drywaller
SWAK-Trockenbau
Grafling & Deggendorf/Germany
Activities:
• Laminating of parts/repair of parts and Customer support at racetracks (Racing Teams in Germany and Austria)
• Drywall work (contract with BMW Dingolfing, Landshut for all new builds and rebuilds with them)
• Additional tasks: management of two employees as Drywaller
EDUCATION AND QUALIFICATION
• Vocational Training – Process Technician for Plastics & Rubber Engineering, Wethje GmbH, Germany (2003)
• General Certificate of Secondary Education (GCSE), Germany
• Certified Quality Manager & Quality Representative ISO 9001
• Six Sigma Black Belt
• Agile Project Management, Internal Audits ISO 9001, Supplier Audits, Risk-Based Supplier Management
• EASA Part-145 incl. Management System Training, Human Factors Training Languages Technical Skills
German: Native SAP (R3 and S4 Hana)
English: C1 Microsoft Office
Catia V5
Basic Solid Works
Auto Vue
MiniTAB (for Six Sigma)
Visa Status
Authorized to work in the USA under E-2 Investment Visa, valid until June 2028. Sarasota, 01/29/2025
Contact this candidate