Program Coordinator Forklift Driver
Resume:
Andrew Maestas
Barstow, CA *****
**********@*****.***
Work Experience
Maintenance Program Coordinator
Technica LLC
August 2024 to Present
As the MPC I had several areas of responsibility:
Safety;
To enforce and monitor all aspects of the safety program according to OSHA and Company
regulations and policies. I would ensure all personal protective equipment (PPE) was utilized and stocked for different required tasks.
I processed all required forms for safety/property damage incidents.
Inspected all maintenance and storage areas for any unsafe working conditions or potential safe hazards.
Held safety meetings with employees according to corporate issued themes and relatable local issues and findings.
Briefed corporate level management on any incidents or any near miss happenings within my realm of responsibility and for any recommendations from the After Action Committee’s findings.
To ensure that the facility was always in inspection ready for all OSHA or military safety inspections
Calibration;
I was responsible for all Testing, Measuring, and Diagnostic tooling inventory.
Ensuring all recalibration due dates were adhered to and schedule all tooling with expiring dates for recalibration.
Briefed all Government management on all updated information or changing situations within the TMDE program.
Hazardous inventory and waste management;
I was responsible for all aspects of inventorying and ordering hazardous chemicals to ensure production schedules were adhered to.
I ensured that all hazardous chemicals were stored properly according to state and federal EPA regulations.
Briefed government management of any possible delays for orders that might or could delay monthly scheduling quotas.
Labeled all new and used hazardous chemicals according to state EPA regulations.
Ensure proper disposition/disposal of all used hazardous waste and empty containers.
Ensured the facility was always in ‘inspection’ ready status for any level of inspection.
Other areas of responsibility;
Safety Of Use Message coordinator
Battery Program Coordinator
Publication Officer
Army Oil Analysis Program coordinator
Key Control coordinator
Warehouse Specialist
The Logistics Company - Barstow, CA
January 2024 to August 2024
• As a warehouse specialist I can perform all aspects for this position utilizing SAP programming hardware.
• Picking- I perform this function according to the information provided on the MRO/1348 document. Using a handheld RF device I scan the work order number, the product number (NIIN/NSN), the warehouse location, and manually input the required quantity. insuring the item is issuable. I'll inspect the condition of the packaging for: condition code, any applicable shelf-life codes, any special handling such as electrostatic discharge, magnetified, or any applicable warning labels.
• Stowing- I'll verify the work order stow ticket for: warehouse location, quantity, product number, and any special handling instructions and assigned work order number. if the warehouse location is not suitable because of batch numbers, weight and dimensions, owner ship codes, and condition codes. A bin-to-bin process will be done to find a suitable storage location.
• I follow all OSHA, and company safety policies and procedures. I perform daily housekeeping practices to insure a safe working environment.
• I utilize different types of material handling equipment such as 4000 lb. forklifts, 4000 lb. Bendi forklift, warehouse tractors, elevated platforms (wave), and pallet jacks.
Production Control Supervisor
DoD MARINE CORPS - Barstow, CA
December 2018 to August 2019
• I supervised civil service employees and contractors in the supplying of repair parts for all Marine corps combat and ground transportation vehicles.
• Initiated the repair schedules of vehicles on assembly lines and subcomponents through the component repair shops utilizing ERP/MRP generated work orders.
• I maintained budgets per allocated programs to ensure all programs remained on or under budgets.
• I also maintained employee assessments and job performances according to government guidelines.
Production Control Supervisor continued…
• I participated in six sigma philosophies and streamlining methods and received green belt instruction.
• I encouraged employee to follow all OSHA safety standards and implemented new process to ensure compliance.
• I also assured compliance with all ISO 9000 audits to ensure that our certification was maintained.
• Forecasted material requirements and developed Bills of Materials for funded and anticipated workloads. Identified long lead items and obsolescence items to be procured from outside vendors
• I managed all time keeping duties for the Material management department, ensuring the correct codes were processed for each employee.
Production Control Lead
DoD MARINE CORPS - Barstow, CA
September 2006 to December 2018
• I assisted management with delegating daily work assignments to Production Control Planners, Material Expeditors, and Material Handlers.
• Maintained inventory levels per Working Capital Fund budgetary requirements ensured all funded Programs budget were adhered to.
• and insured all repair parts were ordered and scheduled per program needed return dates
• I followed all OSHA requirements and ensured that a safe working environment was maintained
• I participated in black belt improvement projects and received yellow belt training for Six lean Sigma philosophies.
• Forecasted material requirements to DLA for approved and funded workloads
Production Shop planner
DoD MARINE CORPS BARSTOW - Barstow, CA
October 2005 to September 2006
• Schedule all incoming workloads for component repair shop. Ensure all material was available for KANBANs• Ordered items into inventory for scheduled workloads.
• Forecasted to supply chain vendors for scheduled workloads and funded projects.
• Updated all production equivalent documentation to verify that all budgetary and workloads were meeting all necessary limits.
• Preloaded warehouse inventory with 100% replacement parts for upcoming funded workloads.
• Worked according to all OSHA requirements and regulations.
• generated work orders to route subcomponents through the system for repair utilizing ERP/MRP hardware.
• developed process kits for subcomponents and assembly line vehicles.
• researched repair parts utilizing FEDLOG, WEBFLIS, ILSMART, and haystack for procurement.
Heavy Mobile Equipment Leader
DOD- Marine Corps civilian - Barstow, CA
September 2005 to September 2006
• Ensured all Artisans work queues have a shifts worth of work.
• Review budgets per project to adhere to job plans and allocated funds.
• Run labor hours according to allocated project requirements
• Attend daily meetings with shop planners to verify material delivery schedule and to collaborate budget and material compliance
• Attend weekly plant production meetings in supervisor’s absence.
• Conduct daily safety inspections for OSHA compliance and policies
• Participate in Six lean sigma projects to streamline processes to improve productivity and monetary performance
• Fill in for the shop supervisor in their absence.
Heavy Mobile Equipment Mechanic
DoD- Marine Corps civilian - Barstow, CA
April 1996 to September 2005
• Rebuilt Light Armored Vehicles (LAV); I worked on different compartments within the family of vehicles (FOV); installed all necessary components in the drivers, troop, engine compartments. I also installed all related components for the suspension and drivetrain areas.
• Rebuilt High Mobile Multipurpose Wheeled Vehicles (HMMWV); I replaced all major components for the (FOV) to include engine, transmission, transfer case, all differentials. I also replaced both frame rails and all related suspension components.
• LAV FOV Components; I rebuilt all components that were installed on the production assembly line according to the back shop schedule report.
• Complied with all OSHA and Depot safety policies
Preservation Specialist
Fleet support division - Barstow, CA
January 1987 to February 1989
• performed all preventative maintenance on the Marine rolling stock to ensure vehicle readiness.
• preserved vehicles for long range storage and drive on and off requirements,
• performed low level repairs to ensure vehicle preparation for issuing to external customers.
Education
High school diploma
Barstow High School
September 1978 to June 1981
Skills
• Analysis skills • Data analysis skills • Leadership • Root cause analysis • Conflict management • Customer relationship management • Windows • Six Sigma • SAP • Customer service • Conflict management • Supervising experience • SharePoint • ERP systems • Leadership • Pricing • Heavy lifting • Forecasting • Negotiation • Account management • Relationship management • Presentation skills • SAP • Purchasing • Materials management • Warehouse management • Manufacturing • Assembly • Data management • Transportation management systems • Auto service management • Order management system • Sourcing • Root cause analysis • Freight • SAP ERP • MRP • Supply chain • Continuous improvement • Databases • Warehouse management system • Computer networking • Lean Six Sigma • ISO 9001 • Six Sigma • Lean • Forklift • Product management • Restaurant experience • Data analytics • Procurement • Human resources • 5S • Sports coaching • Automotive repair • HR sourcing • SAP Supply Chain Management • Research • Analytics • Communication skill
• Microsoft PowerPoint • Microsoft Word • Microsoft Excel • Inventory management • Microsoft Office • Project leadership • Research & development • Supply chain management • Warehouse experience • Sales • Computer skills • Mechanical knowledge • Management
Certifications and Licenses
Six Sigma Green Belt
Driver's License April 2019 to April 2024
Forklift, warehouse tractor, Bendi forklift, and elevated personnel lift license (TLC LLC)
Contact this candidate