Inayat Ullah Saudi Aramco Approved QA/QC Manager

INAYAT ULLAH (Saudi Aramco Approved QA Manager & QC

Manager, SAP#80019528 & Saudi Council Registered- Mechanical Engineer#598581)

****.******.******@*****.*** & **************@*****.*** Skype I.D: anayat.ullah188

(Mob KSA):009***********/009*********** Pak. Home # 009*********** Current Address: Saudi Arabia, Eastern Province, Al-Khobar.

Registered Engineer with SEC (Saudi Engineering Council) & Membership#598581 Saudi Aramco Approval Matrix:

S.NO Client Status Position Company

1 SAUDI ARAMCO Approved QA/QC Manager SAQCO Arabia Ltd Co. 2 SAUDI ARAMCO Approved QA/QC Manager SAQCO Arabia Ltd Co. 3 SAUDI ARAMCO Approved QA/QC Manager SAQCO Arabia Ltd Co. 4 SAUDI ARAMCO Approved QA/QC Manager SAQCO Arabia Ltd Co. 5 SAUDI ARAMCO Approved QC Manager SAQCO Arabia Ltd Co. 6 SAUDI ARAMCO Approved QA Manager China Harbour Engg Co 7 SAUDI ARAMCO Approved QC Manager Al-Akhdood Cont. Co 8 SAUDI ARAMCO Approved QC Mechanical Supervisor Al-Robaya Limited Co. 9 SAUDI ARAMCO Approved QC Mechanical Inspector Arkad Engg. & Cons Co. Saudi Aramco Piping CBT Exam Passed (Registeration#446853112 & Validation#880863193) Saudi Aramco Welding CBT Exam Passed (Registeration#457083328 & Validation#208-***-****) Saudi Aramco SAP#80019528

BELOW CERTIFIED AND VALID BELOW MAJOR CERTIFICATIONS:

• Certified &Valid CSWIP 3.1 (Level#2): Customer#000******* from TWI UK.

• Certified and Valid ISO 9001:2015 Lead Auditor-Certificate# QMSLA/19/11/0134 & UDN NO#238888 (IRCA Approved).

• Certified and Valid PMP Cert.#70981-177321-114378.

• Certified and Valid HUET Tropical Helicopter Underwater Escape Training #342157826178325982

• Certified and Valid Offshore Valid medical exam certificate.

• Certified and Valid H2S Valid.

• Certified and Valid Six Sigma Green Belt#MEQMP-SSGB-020521-12

• Certified and Valid Six Sigma Black Belt#817***********.

• Certified and Valid ISO 14001:2015 EMS (Environmental Management System) Lead Auditor Cert.#1428- 19617523.

• Certified and Valid PMI-RMP Cert.#71821-177321-114412.

• Certified and Valid Advance Operation Management Diploma Cert.#170*-********.

• Certified and Valid ISO 45001:2018 Lead Auditor Occupational Health & Safety Management System Cert# UC-dc56254e-3kf4-4a5c-b8de-7e24aaa7a1k8.

• Certified and Valid ISO 50001 Energy Management System Cert# UC-dc7854m-3kf4-4n5c-b8de- 7e24vba9a1u7.

• Certified and Valid IBM-Risk Management I.D#243216-159-203-0073.

• Certified and Valid Supply Chain Management Cert#UC-dc56273e-3ef2-4a5c-b8de-7e24aaa7a1e5.

• Certified and Valid IBM-Project Management I.D#243216-159-203-7164.

• Certified and Valid Change Management I.D#243216-159-203-6830.

• Certified and Valid Leadership and Team Development I.D#243216-158-757-5615.

• Certified and Valid Customer Service Skills (Handling Difficult Customer) I.D#874235564.

• Certified & Valid RIGGER Level-I Reg.#5062559.

• Certified &Valid NDT/ASNT Level-II RT#NDT207576/RT-03/2017

• Certified &Valid NDT/ASNT Level-II UT#NDT207576/UT-01/2017

• Certified &Valid NDT/ASNT Level-II MT#NDT207576/MT-02/2017

• Certified &Valid NDT/ASNT Level-II PT#NDT207576/PT-01/2017

• Certified and Valid OSHA#US8e4dcaf8-c241-4cfd-b89e-7d78e307e788

• Certified and Trained of both Metallic and Non-Metallic GRE/RTR (Fiber Star/Fiber Spar) Pipes.

• Valid Saudi Arabia driving license.

PROFILE:

A versatile, solution-oriented professional with multi-cultural, global operation experience & a passion for talent development & continuous improvement. I've built and lead team in the areas of operations, quality management, change management, project management & supply chain optimization. Total 14-Years of gulf experienced in the field of Mechanical, Civil and Construction Oil and Gas/Petrochemical sector (Static & Rotary Equipment) as a QA/QC Manager/Engineer/Inspector, Shutdown jobs of OIL& GAS Projects, Quality Assurance & Quality Control and Industrial works as per ASME, API, ASTM, SAES, SAEP, SAIC, SATIP and International Codes & Standards.

EDUCATION QUALIFICATI0N

Bachelor of Engineering (BE) in MECHANICAL, UET SARHAD Peshawar, KPK, Pakistan in2013, Marks:(CGPA 3.3/4).

Master of Science in Total Quality Management from AITU (American International Theism University), Florida, USA, Marks:(CGPA 3.1/4).

ACADEMIC PROJECT

Development of Method for the Removal of Sludge from SHELL & TUBE Type Heat Exchanger (Oil and GAS). WORK EXPERIENCE

1. SAQCO Arabia Limited Company Al-Khobar, KSA (01-April.2025 To Till Date. . .) Job Title: Corporate QA/QC Manager

Client: Saudi Aramco

2. China Harbour Engineering Company, Rasul Khair, KSA (21-Oct.2024 to 31-March-2025) Job Title: QA Manager

Client: Saudi Aramco

3. SAQCO Arabia Limited Company Al-Khobar, KSA (25-Aug.2024 To 20-Oct.2024) Job Title: Corporate QA/QC Manager

4. RTCC/Al-Akhdood Trading and Contracting Co. Al-Hasa, KSA (28. Mar.2024 to 20-Aug.2024) Job Title: QC Manager

Client: Saudi Aramco

5. Oil Industry Supply and Services company (03-Sep-2023 to 17. Mar.2024) Job Title: QA/QC Manager

Client: Saudi Aramco

6. Al-Robaya Limited Company, Abqaiq, KSA (07-Febraury 2022 to 31-Aug-2023) Job Title: Acting QC Manager (Mechanical/Piping Supervisor) Client: Client: Saudi Aramco

7. National Oilwell Varco (NOV) Saudi Arabia Ltd. Dammam (Feb.18 2018 to Jan.19 2022) Job Title: QC Mechanical/Piping Supervisor

Client: Saipem/Tekfen

8. Arkad Engineering and Construction Contracting Company, Al-Khobar, KSA (Mar.24, 2016 to Jan.24, 2018) Job Title: QA/QC Mechanical/Piping Inspector

Client: Saudi Aramco

9. Al-Banoosh Trading Establishment Co-Abu Dhabi, United Arab Emirates (Jul.07, 2014 to Feb.15, 2016 Job Title: QA/QC Mechanical Engineer

Client: Gasco

10. Oil & Gas Development Company Limited Government of Pakistan (Sept.25, 2012 to Jun.28, 2014) Job Title: QA/QC Mechanical Inspector.

Major Duties & Responsibilities of QA Manager:

• Create and enforce quality assurance policies, procedures, and work instructions.

• Develop the Project Quality Management Plan (QMP) and ensure alignment with Aramco’s quality standards and industry best practices.

• Oversee the application of quality standards throughout design, procurement, and construction phases.

• Review and approve material submittals, drawings, and equipment data to meet Aramco’s specifications.

• Define and plan inspection and testing requirements for materials, equipment, and construction activities.

• Organize and supervise inspections to ensure adherence to quality standards.

• Manage the identification and resolution of non-conformances (NCRs), ensuring corrective actions are taken.

• Conduct internal quality audits and coordinate third-party audits to assess the effectiveness of the QMS.

• Promote continuous improvement by identifying root causes of quality issues and implementing corrective/preventive actions.

• Maintain comprehensive records of quality-related documentation (inspection/test reports, NCRs, corrective actions).

• Prepare and submit regular quality performance reports to senior management and Aramco, including key metrics and issues.

• Lead and manage a team of quality control engineers and inspectors.

• Act as the primary contact for quality-related issues with Aramco, contractors, and subcontractors.

• Facilitate training programs to ensure project teams are aligned with quality requirements.

• Identify potential quality risks early and implement mitigation strategies.

• Ensure compliance with local, national, and international standards, and Aramco’s specific requirements.

• Ensure quality control processes extend to commissioning activities.

• Manage the preparation and submission of quality documentation for final handover to Aramco.

• Align quality assurance practices with safety standards to ensure a safe working environment without compromising quality.

• Ensure proper retention and archiving of all quality-related records for future reference as per Aramco’s and regulatory requirements.

• Track and report on KPIs related to quality performance, non-conformances, and corrective actions Major Duties & Responsibilities of QC Manager:

• Develop and implement the Project Quality Control Plan (PQCP) in compliance with Aramco standards and specifications.

• Define quality control procedures, inspection protocols, and testing plans for all construction activities.

• Oversee and manage inspections of materials, equipment, and construction activities.

• Ensure that testing and inspections are conducted in accordance with project specifications, codes, and Aramco requirements.

• Coordinate and schedule inspections with relevant stakeholders (e.g., Aramco, contractors, subcontractors).

• Identify, document, and track non-conformances (NCRs) and deviations from quality standards.

• Lead the investigation and resolution of NCRs, ensuring corrective and preventive actions are implemented.

• Ensure all materials and equipment used in construction meet Aramco's quality standards.

• Review and approve material submittals, certifications, and test reports from suppliers and vendors.

• Maintain accurate records of inspections, test results, NCRs, and corrective actions.

• Prepare and submit regular quality control reports to senior management and Aramco’s project team.

• Lead, manage, and supervise the quality control team, including inspectors and engineers.

• Provide training and guidance to project teams on quality control standards and procedures.

• Conduct internal quality control audits and assist in external audits by Aramco or other third parties.

• Ensure that quality management processes are followed and recommend improvements where necessary.

• Work closely with engineering, procurement, construction, and commissioning teams to ensure quality standards are integrated across all phases of the project.

• Communicate and coordinate with Aramco representatives to ensure project quality expectations are met.

• Ensure that construction work complies with relevant industry codes, standards, and regulatory requirements.

• Monitor adherence to Aramco-specific quality specifications and construction standards.

• Identify potential quality risks and ensure preventive actions are in place to minimize their impact on project timelines and quality.

• Ensure that quality control processes do not compromise safety standards and that both quality and safety are prioritized on-site.

Major Duties & Responsibilities of QA/QC Mechanical/Piping Supervisor/Engineer:

• Lead and supervise QA/QC inspectors and technicians responsible for mechanical and piping inspections.

• Ensure that the team follows the inspection procedures and project quality requirements.

• Coordinate with construction teams, engineers, and project managers to ensure seamless integration of QA/QC processes into construction activities.

• Assign daily tasks to QA/QC staff and monitor their progress to ensure that inspections and tests are completed on time.

• Review project specifications, mechanical/piping drawings, and standards (ASME, API, ASTM, etc.) to develop a QA/QC inspection plan.

• Ensure that all mechanical and piping materials delivered to the site meet the project specifications and required quality standards.

• Inspect and approve incoming materials based on material certificates and standards.

• Supervise inspections of piping fit-up, alignment, welding, and installation, ensuring compliance with design drawings and codes.

• Verify that all piping and mechanical installations meet project quality standards and relevant safety codes.

• Conduct and oversee dimensional and tolerance inspections to ensure correct assembly of mechanical and piping components.

• Ensure that all welding operations are performed according to approved Welding Procedure Specifications

(WPS) and Procedure Qualification Records (PQR).

• Supervise and monitor the work of welders, ensuring they are certified and following approved procedures.

• Oversee pre-weld joint preparations and post-weld inspections to identify any weld defects (cracks, porosity, undercuts).

• Ensure proper coordination of NDT activities such as radiography, ultrasonic testing, and magnetic particle testing to verify weld integrity.

• Supervise pressure tests, including hydrostatic and pneumatic testing, of piping systems to ensure they meet the required standards.

• Prepare test plans and procedures for the testing of mechanical and piping systems.

• Witness and verify all pressure testing, system flushing, and cleaning processes, ensuring compliance with safety and quality standards.

• Oversee the commissioning process for piping and mechanical systems, ensuring all components function correctly before handover.

• Identify and document any deviations or non-conformances from project specifications or standards.

• Issue Non-Conformance Reports (NCRs) when necessary, and ensure that corrective actions are implemented.

• Investigate the root causes of quality issues and defects, and recommend corrective and preventive action.

• Ensure timely resolution of non-conformance issues by working closely with construction teams and vendors to implement corrective actions.

• Develop and implement Inspection and Test Plans (ITPs) for mechanical and piping activities.

• Ensure that all inspections are carried out according to the ITP.

• Review quality control documentation, including material certifications, inspection reports, NDT reports, and test results.

• Prepare detailed reports summarizing inspection results, issues identified, and corrective actions taken.

• Maintain comprehensive records of all QA/QC activities, ensuring accurate documentation of all inspections, tests, and corrective actions.

• Ensure that all mechanical and piping systems meet the required industry codes and standards (e.g., ASME, API, ASTM).

• Ensure that all work related to mechanical and piping systems complies with HSE regulations, particularly those related to pressure systems and hazardous materials.

• Participate in internal and external quality audits to ensure ongoing compliance with standards and project requirements.

• Regularly review project specifications to ensure all installations meet the client’s and regulatory standards.

• Assist in evaluating and qualifying mechanical and piping suppliers and subcontractors to ensure they meet SAQCO’s quality requirements.

• Oversee inspections at supplier or subcontractor facilities, ensuring that the delivered components meet project standards.

• Liaise with third-party inspectors and ensure their inspections are aligned with SAQCO’s quality control procedures.

• Provide training and mentoring to QA/QC inspectors and construction staff on quality standards, inspection techniques, and documentation processes.

• Promote a culture of quality on-site by raising awareness about the importance of adhering to QA/QC processes.

• Encourage continuous improvement through feedback, audits, and implementing best practices for quality management in mechanical and piping systems.

• Ensure that all mechanical and piping activities are conducted in compliance with HSE regulations and safety protocols.

• Identify and mitigate any potential hazards related to piping and mechanical systems, ensuring that appropriate safety measures are in place.

• Oversee the handling of hazardous materials and ensure that environmental standards are maintained throughout mechanical and piping work.

• Review and approve as-built drawings and ensure they accurately reflect installed mechanical and piping systems.

• Ensure that all quality documentation, including inspection reports, test results, and NCR resolutions, is completed and handed over to the client at project closeout.

• Oversee the preparation and resolution of punch list items before the final handover of mechanical and piping systems to the client.

Major Duties & Responsibilities of QC Mechanical/Piping Inspector:

• Ensure that all mechanical and piping materials meet project specifications and standards (ASME, API, ASTM, etc.).

• Verify material certifications (MTC), including grades, dimensions, and coatings.

• Perform visual and dimensional checks on piping and mechanical components during and after installation.

• Ensure that installed components conform to approved drawings and specifications.

• Inspect pipe fit-up, alignment, and orientation prior to welding to ensure compliance with project drawings.

• Confirm flange alignments, gasket selection, and joint preparation before final assembly.

• Ensure all welding is performed as per approved Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQR).

• Verify that welders are certified and qualified according to the WPS.

• Inspect weld joint preparations, cleanliness, and preheating requirements before welding begins.

• Monitor and inspect welding activities to ensure that proper techniques, filler materials, and shielding gases are being used.

• Perform visual inspections of completed welds, checking for weld defects like cracks, undercuts, porosity, and other irregularities.

• Coordinate and witness Non-Destructive Testing (NDT) methods like Radiography (RT), Ultrasonic Testing

(UT), Magnetic Particle Testing (MT), and Dye Penetrant Testing (PT).

• Review NDT reports and ensure compliance with applicable codes and standards.

• Witness and inspect hydrostatic and pneumatic pressure testing of piping systems to ensure systems are leak-proof and meet pressure standards.

• Ensure that piping systems are properly flushed and cleaned after testing, removing debris, contaminants, and foreign objects.

• Conduct final mechanical completion inspections before system turnover, verifying that all components are installed and tested according to project requirements.

• Assist in the commissioning and start-up of mechanical and piping systems by ensuring that all systems operate correctly and meet project requirements.

• Prepare detailed inspection and test reports documenting findings, issues, and corrective actions taken.

• Maintain accurate and detailed quality control records for all mechanical and piping activities, including material certificates, inspection reports, and NDT results.

• Identify and document non-conforming materials, workmanship, or processes and issue Non-Conformance Reports (NCRs) as required.

• Review and approve piping test packs, ensuring all required tests and inspections are completed and documented.

• Assist in the preparation and review of as-built documentation, ensuring all changes are accurately captured and documented.

• Ensure compliance with industry standards such as ASME, API, ASTM, and company-specific quality requirements.

• Ensure that all piping and mechanical installations meet local and national safety regulations and codes.

• Review and interpret project specifications, P&IDs, isometric drawings, and general arrangement drawings for quality compliance.

• Ensure that all mechanical and piping work is performed in compliance with the project’s health, safety, and environmental (HSE) standards.

• Coordinate with construction teams, engineers, and project managers to ensure smooth implementation of QA/QC procedures.

• Coordinate third-party inspections and audits for specific tests and certifications when required by the client or regulations.

• Regularly communicate with the client or client’s representative regarding quality-related matters, inspection schedules, and test results.

• Coordinate with construction teams to implement corrective actions for any identified defects or quality issues.

• Identify opportunities for improving QA/QC processes and suggest modifications to existing procedures and practices.

• Participate in training programs for quality control personnel, ensuring the team remains up to date with new codes, standards, and inspection techniques.

• Ensure that mechanical and piping installations are performed safely, adhering to HSE requirements.

• Identify and mitigate any potential hazards related to mechanical and piping works during inspections and operations.

• Ensure that mechanical and piping systems, especially those involving hazardous materials, comply with environmental regulations.

• Participate in internal and external quality audits, providing information and documents related to mechanical/piping quality inspections.

• Prepare and manage punch lists during project closeout, ensuring that all quality issues are addressed before final handover.

• Continuously seek and apply improvements in inspection techniques, standards compliance, and overall project quality.

PERSONAL

Date of Birth : 05 April 1990.

Marital Status : Married.

Nationality : Pakistani.

References : Can be furnished upon request.

***

Contact this candidate