NDT Supwrvisor
Resume:
CURRICULUM VITAE
OSAIKHUWUOMWAN, JUDE ORHUE
** **** *****, ***: 080******** & 081********
Okpagha Road, E-mail: *****@*****.***
Eyaen
Benin City,
Edo State.
Career Profile
Over ten (10) years offshore and onshore experience in installation and commissioning, maintenance, calibration, inspection and certification in the oil and gas industries (upstream and downstream sectors). Responsibilities include installation and commissioning of temporary accelerated gas-lift projects. Installation and commissioning of fuel lines. Inspection and certification of lifting gears and equipments. Conduct NDT such as MPI, UT on pipes. Welded joints etc. Perform and supervise torque / hot bolting operations, hydro testing operations. Career Objective
Attaining the level of a thorough professional by developing my competence and potentials into the requirements of the organization. Employing logical and analytical approach towards problem solving Personal Details
Date of Birth: 6th December, 1981.
Marital Status: Married
Sex: Male
L.G.A: Orhionmwon
State of origin: Edo
Nationality: Nigerian
Educational qualification
2005: University of Benin,
B.Eng. Mechanical Engineering,
Second Class Honors {Lower Division}
2004 Macromedia Computer School
Diploma in Computer Business Application and Software Development 1998: Wilson Secondary School, Kaduna
Senior School Certificate (WAEC O’ Level)
1991: Army Children School, Kakuri, Kaduna.
Primary School Leaving Certificate
Trainings and Certification
2014: CERTIFICATE OF TRAINING ON ELECTRICAL RISKS ON CONSTRUCTION SITES APAVE (CFL)
2014: GIT A5 – INSTRUMENTATION MAINTENANCE & CALIBRATION TECHNIQUES GIL AUTOMATION LIMITED (Basic industrial Automation Training) 2013: LETTER OF RECCOMMENDATION ON SUCCESSFUL COMPLETION OF NOVEMBER 2013 BONGA TURNAROUND MAINTENANCE FOR SNEPCO AS MECHANICAL OPERATIONS PERSONNEL
2013: BASIC OFFSHORE SAFETY INDUCTION & EMERGENCY TRAINING (B.O.S.I.E.T) Course conducted in accordance with DPR Nigeria/International approved Standards 2013: CERTIFICATE OF PARTICIPATION ON HSSE WORKSHOP FOR BONGA FPSO TURNAROUND MAINTENANCE (SNEPCo)
2013: FITNESS TO WORK CERTIFICATE
2013: HELICOPTER UNDERWATER ESCAPE TRAINING / SURVIVAL AT SEA (H.U.E.T / S.A.S) Course conducted in accordance with DPR Nigeria/International approved Standards 2012: CERTIFICATE OF ATTENDANCE ON NORTHSEA LIFTING (MODULES 1, 3, 4 & 6) 2012: CERTIFICATE OF TRAINING ON PERMIT HOLDER IN WORK MANAGEMENT SYSTEM AND E-PERMIT-T0-WORK (EXXONMOBIL UPSTREAM NIGERIA)
2011: ASNT LEVEL II ON MAGNETIC PARTICLE INSPECTION, MPI. 2011: CERTIFICATE OF COMPETENCE IN LIFTING (FEDERAL MINISTRY OF LABOUR AND PRODUCTIVITY)
2011: LETTER OF COMMENDATION FOR SUCCESSFUL COMPLETION OF MPNU OSO SHUTDOWN MAINTENANCE PROJECT ON TORQUE/HOT BOLTING OPERATIONS 2010: LETTER OF COMMENDATION FOR SUCCESSFUL COMPLETION OF SCNL NOVEMBER / DECEMBER LIFTING INSPECTION/CERTIFICATION AND COLOUR CODING PROJECT Work Experience
• June 2019-June 2025 ENGINERRING SYSTEMS INC (ESI)
(NORCROSS GA 30071)
NDT TECHNICIAN
Job Responsibility Develop technical documentation, procedures and execution plans for NDT operations
Ensure safe working practices are carried out within the work Environment and demonstrate a personal commitment to HSE Assist in interpreting and validating engineering drawings and Ensure alignment between design and fabrication
S
Supervise technical quality during NDT and fabrication inspectors Ensure QA/QC commitment to clients and from other companies Actively participates in and promotes company Health and Safety Campaigns, policies and procedures
Coordinate equipment and personnel logistics across fabrication Yard
Plan, direct and perform routine maintenance on NDT equipment Perform additional responsibilities assigned by NDT supervisor
• May 2014-Dec 2018 ENERGY WORKS TECHNOLOGY LIMITED
(A NESTOIL SUBSIDIARY)
Nestoil Industrial Area, Abuloma, Port Harcourt. Rivers State
(Calibration / Testing Engineer)
Job Responsibility Ensuring that all EWT owned inspection, measuring & test equipment has a current calibration certificate
Ensuring that all equipment in use is in a known state of calibration Withdrawing from use any equipment found to be damaged or defective
Marking and placing in quarantine any damaged or defective equipment
Review of inspection & test carried out with equipment found to be defective, in conjunction with the welding inspectors Developing and maintaining equipment calibration records / register Developing & maintaining ongoing location records of calibrated equipments
Developing of equipment calibration & vessels / spools hydrostatic pneumatic & atmospheric testing procedures
Perform hydrostatic, pneumatic & atmospheric test on pressure vessels, storage tanks, spools, pig launchers / receivers etc and prepare their reports.
Perform & prepare report on calibration of welding machines, electrode ovens, quivers etc
Examination of workshop tools to ensure they are in good working order & not severely worn or damaged fortnightly
Assist the dimensional controllers in carrying out dimensional checks, fit up inspection before & after any fabrication done, ovality checks etc on pressure vessels, pig launchers, etc Assist the welding inspectors in performing Procedure Qualification Records, weld inspection etc
Perform additional responsibilities assigned by QA / QC manager
• August 2009-April 2014 ENGINEERING AUTOMATION TECHNOLOGY LIMITED
(NIS ISO 9001:2008 CERTIFIED)
5 Apagodo Street off Ada-George, Portharcourt.
(Service Engineer/Supervisor of Mechanical/Power Tool Unit) Job Responsibility Installation of injection and depressurization units of the injection and annulus casing valves for oil wells during temporary accelerated gas-lift project at MPNU offshore locations, such as ENANG JE (INIM PP), UBIT GB & GA (UBIT PP), etc
Rigging and installation of spools from the source well to the manifolds during temporary accelerated gas-lift project such as ENANG JE (INIM PP), UBIT GB & GA(UBIT PP), etc
Supervise torque, hot bolting and tensioning operations at all EXXONMOBIL, SNEPCo and TEPNL operational locations
(Offshore and Onshore)
Perform torque, hot bolting and tensioning operations at all EXXONMOBIL, SNEPCo and TEPNL operational locations
(Offshores and Onshore)
Determine torque & tensioning values for respective bolt sizes Conduct thorough visual inspection and certification of lifting Equipment / gears such as mobile cranes, wire ropes, shackles, chain blocks, webbing slings for DBN, SAIPEM, etc
Conduct magnetic particle inspection (MPI) & ultrasonic thickness (UT) test and certification on metal structures, Storage Tanks, welded joints such as pad eyes, hook blocks, compressor skids, for DBN, SAIPEM, MPNU, TOTAL, USAN etc Conduct lifting equipment inspection test to include functional and Load testing where applicable, for SAIPEM, TOTAL etc Carry out pressure / hydro testing on valves, spools etc, using pumps or hydrostatic pumps
Evaluate, interpret and report both lifting equipment Inspection and flow meter test results
Supervise the maintenance team and ensure satisfactory maintenance of all company’s project asset
Draw up preventive maintenance program for all company’s project asset and ensure its implementation
Removal, servicing, repairs, calibration and installation of all EXXONMOBIL (FUEL CONTROL UNIT) flow meters, custody transfer and dispensing meters at Q.I.T, Bonny River Terminal, Airstrip and M.H.E in Eket, Lagos fuel dumps and Offshore locations such as INNIM, IDOHO, ASABO, YOHO FSO and UBIT Platforms
Ensure and update as necessary the validity of the flow meter Calibration procedures
Ensure that flow meter calibrations are carried out according to the Department of Petroleum Resources requirements and the certifications of same, duly approved by same regulatory body, DPR
Organize, and as necessary supervises the calibrations and repairs of flow meters
Perform additional responsibilities as assigned by my manager Adhere to, support and enforce all company safety
environmental rules, policies and procedures
● November 2008-July 2009 Drug field Pharmaceuticals Limited Sango Ota, Ogun State
(Mechanical Engineer)
Job Responsibility Supervising and leading maintenance crew that service, repair and overhaul production equipments, such as blistering, syrup encapsulation, tube filling and washing machines
Planning maintenance work schedule, perform report writing and report directly to the Plant Engineer
Ensure complete adherence to GMP/ HSE Practices in the factory
● September 2007-October 2008 Drury Industries Limited Alum & Sulphuric Acid Plant. Agbara
(Maintenance Engineer)
Job Responsibility: Servicing & installation of industrial pumps and valves Maintenance of conveyors, blowers, compressors, water, steam and air lines
Supervision of machine shop operations & fabrications
● September 2006-August 2007 Dupmos Comprehensive School Ijebu-Ode Job Responsibility: Physics Teacher {SS1&2} NYSC SERVING YEAR
● November 2005- August 2006 Nuecbrom Nigeria Limited, Ibadan.
(Assistant Foreman)
Job Responsibility: Maintenance, repairs and overhauling of forklift trucks for Nigerian Breweries Plc.
Performing preventive maintenance of all diesel engines Ensure compliance with HSE and GMP in the factory
Inspection of all diesel engines spare parts
● September 2004- February 2005 Pipelines and Products Marketing Company
(A Subsidiary of NNPC) Kachia Road, Kaduna
(Industrial Attachment)
Job Responsibility: Maintenance of industrial generators and oil pipelines. Raising of MIV and Work Orders in the Office and interpretation of engineering drawings
Projects Executed
• Successful completion EGINA UFR ( LBL ARRAY TRANSPONDER FRAME) for Total Upstream Nigeria Limited. October 2014 (Calibration Engineer)
• Successful hydrostatic testing of Seplat Vessels and Piping, Pig Launchers and Receivers, SPDC Domgas Vessels, Soku Nag clad Vessels. November 2014 / February 2015. (Hydro test Engineer)
• Successful completion of Torque, Hot bolting, Tensioning and Machinist operations at November 2013 BONGA FPSO Turnaround Maintenance for SNEPCo (Lead Supervisor)
• Mechanical Team Lead during the installation and commissioning of Enang JE (INIM PP) and Ubit GB & GA (UBIT PP) temporary accelerated gas-lift project, (October & December 2012)
• Successful supervision of Torque / Hot bolting operations for MPNU YOHO, EDOP, OSO, EAP, ETIM, ASABO, UBIT, IDOHO, INIM, EKPE production platforms shutdown maintenance projects. March 2010 – June 2012 (Lead Supervisor)
• Successful completion of Torque operations for MPNU ERHA FPSO, USARI, EKPE, UBIT, INIM, OSO and UBIT production platform (gas lift and flow lines installation) April 2011 – June 2012
(Lead Supervisor)
• Successful completion of November/December 2010 Lifting Inspection/Certification and Colour Coding for SAIPEM CONSTRUCTING NIGERIAN LIMITED (Team Member)
• Installation and commissioning of fuel bypass line at ATK and PMS tank farms at Q.I.T for EXXONMOBIL, June 2009 (Team Lead)
• Installation and Commissioning of Equipments in the factory such as Chillers, Autoclave, Boiler, Reversed Osmosis Machine & Cooling Tower, for Drug field Pharmaceuticals Ltd, February 2009
(Team Member)
Personal Skills & Competences
• Ability to learn quickly
• Ability to work under pressure to meet targets with minimum supervision
• Excellent analytical thinking
• Team player with a capacity for independent thinking
• Dynamic, versatile and resourceful
• Computer proficient in Microsoft word and excel
• Excellent communication and interpersonal skills. Hobbies
Reading, Watching & Playing Football, Playing Chess and meeting new friends REFEREES
1) Engr. Odaro Ero 2) Dr Kalato Holts 3) Engr. Martin Osikhuemhe Lee Constructions Ltd, Engineering Systems Inc Mechanical Engineering Department
(A Subsidiary of NNPC) +1-470-***-**** University of Benin
Contact this candidate