Versatile Technician with Hands-On Expertise
Resume:
Jesse England
Goal oriented technician
Albany, GA 31707
*************@*****.***
Professional Summary
I am capable to learn new skills and excel in working with my hands along with hand and power tools. Willing to relocate to: Warner Robins, GA
Authorized to work in the US for any employer
Work Experience
Technician
Nissan-Bonaire, GA
March 2024 to October 2024
• Identify problems, often by using computerized diagnostic equipment
• Plan work procedures, using charts, technical manuals, and experience
• Test parts and systems to ensure that they work properly
• Follow checklists to ensure that all critical parts are examined
• Perform basic care and maintenance, including changing oil, checking fluid levels, and rotating tires
• Repair or replace worn parts, such as brake pads, wheel bearings, and sensors
• Perform repairs to manufacturer and customer specifications
• Explain automotive problems and repairs to the clients. Technician
AgPro-Lilburn, GA
May 2023 to March 2024
• Perform basic diagnostics, service repairs and maintenance work on customer and/or dealer-owned agricultural and turf equipment
• Performs basic diagnostics and reports on agricultural and turf equipment and established Ag Management Solutions (AMS) products
• Participate in Service EDUCATE Training programs required for the development of skills and knowledge
• Maintain current knowledge of John Deere and Competitive products
• Maintain condition of vehicles, inventory, tools and equipment
• Follow all safety rules and regulations in performing work assignments
• Complete all reports and forms required in conjunction with work assignments
• Account for all time in the time keeping systems and for all material used in performing assigned duties RV Technician
Campers Inn RV-Tucker, GA
December 2021 to May 2023
• Perform routine maintenance such as changing oil, checking batteries and lubricating equipment and machinery
• Raise RV’s or equipment using hydraulic jacks or hoists
• Inspect, test and listen to defective equipment to diagnose malfunctions
• Replacing faulty parts
• Inspect and verify dimensions and clearances of parts to ensure conformance to factory specifications
• Assist in repairing and maintaining plumbing, electrical, and/or HVAC components
• Ability to learn OSHA and other related state and federal regulations as they pertain to vehicle repairs, safety, and disposal of vehicle parts and fluids
• Ability to communicate effectively across various levels of the organization, and communicate with customers
• Ability to read, analyze and interpret documents such as safety rules, operating and maintenance instructions and procedural manuals
• Ability to use a variety of hand tools and power tools
• Ability to comply with OSHA regulations regarding Protective Clothing and Equipment, such as goggles, gloves, etc
• Ability to safely use petroleum products, solvents, and other chemicals
• Ability to move RVs of various sizes
• Ability to organize various physical tasks through adjusting, climbing ladders, connecting, lifting, pulling, pushing, or bending
• Ability to stand for long periods of time.
• Ability to reach above shoulders and lift a minimum of 50 pounds Driver
BUCK JONES NURSERY-Grayson, GA
August 2020 to November 2021
Pre-trip inspection on any truck I will drive for the day. Load the dump truck with material and call customer letting them know I will be headed put in their direction. Also, I drive a flatbed and when doing so I have to make sure that the load is secure and strapped down. Log into driver logs and make sure that they are correct. At the end of each shift I do a post-trip inspection to make sure everything is up to standard on the truck.
Carpet Technician
Zerorez Atlanta-Atlanta, GA
April 2019 to July 2020
Arrive at work and attend daily meetings going over the previous day's numbers and any tips and tricks that we may use during the day. Once I received my destination I safely drive to the customers home. Upon arrival I would place cones all around the vehicle to ensure driver safety while I was cleaning carpets. Once I established the areas I would be working in I would set out corner guards and proceed to set up the home for my cleaning. Afterwards I would ensure my services were 100% satisfied with the customer and take payment over my cell phone. Once I closed out the customers invoice I would proceed to pickup cones and move on to the next customer. CNC Operator
J&V Creations-Albany, GA
April 2018 to April 2019
Tried my hand at the small business game with doing wood working and carves. I built entertainment centers along with doing personal carves.
Using a 750mm X-carve I would carefully measure the length, width, and depth of the material to be carved. Then after inputting the measurement into the system I would ensure the material was secured to the cut board and that I had the correct cutting bit attached to the machine. Afterwards I would perform and detail sanding, painting, or staining to be applied to final product. Carpenter
Birdsey Construction-Atlanta, GA
August 2018 to March 2019
After getting punch list, my job was to have it completed at the end of the given time frame. Punch list would include framing, drywall, foot boards, crown molding, and painting. Prep Manager
Premium Coating Solutions-Americus, GA
April 2017 to July 2018
Arrive to jobsite and prep for the day including but not limited to getting paint rollers ready for painter, checking any equipment to be used and cleaning if need be. Ensuring that the trailer was organized and up to standard. Cleaning all materials at the end of the day and placing items back where they go so easy start up the following day.
Shipping and Receiving
Tifton Aluminum Extrusions-Tifton, GA
November 2015 to March 2017
Organizing material to be shipped in staging area so employees are able to locate it for loading onto flatbed. Making sure order is not over weight on the truck. Getting paperwork to driver and also employees for next shipment. Clean as you go type of environment. Delivery Driver
Domino's-Albany, GA
June 2015 to November 2015
Once an order would arrive, the team (including myself) would then make the order and place it in the staging area to be picked up by either a delivery driver or a customer. I would then place the order into a bag to remain warm during transportation. Once upon arrival, I would take the order out of the warming bag and give to the customer after coming to the door. Payment would then be taken if it hasn't already been done with credit card. All cash was deposited into a locker so to maintain safety of drivers. Maintenance Mechanic Assistant
Oxford Construction Company-Albany, GA
November 2013 to June 2015
Anything broken or not working properly on any heavy equipment machinery was written up and sent to the maintenance department. We would then go and assess the problem and order parts to fix the problem. From electrical to hydraulics to broken welds, we did it all. Education
Some college in Signal Intelligence Analyst
U.S. ARMY - Classified
October 2006 to October 2010
GED
Albany Technical College - Albany, GA
June 2005 to July 2005
Skills
• Food safety
• Industrial equipment
• Mechanical knowledge
• Management
• Clamp truck (2 years)
• Manufacturing
• Basic math
• Dump truck (1 year)
• Mechanic Experience (5 years)
• Heavy equipment operation (2 years)
• Manufacturing (5 years)
• Warehouse experience
• Hand tools
• Carpentry
• Heavy equipment operation
• Construction
• Flatbed (1 year)
• Shipping & receiving
• Windows
• Forklift (7 years)
• Assistant manager experience
• Box truck (1 year)
• Product demos
• Military
• Calipers
• Electrical experience
• Delivery Driver Experience (4 years)
• Crane
• Assembly
• Flatbed (2 years)
• Microsoft Office (5 years)
• Maintenance
• Writing skills
• Quality control
• Cash handling
• Power tools
• Math
• Typing
• Woodworking (2 years)
• Customer service (7 years)
• English (10+ years)
• Electrical systems
• Communication skills
• English
• Outdoor work
• OSHA
• Analysis skills
• Sales
• Micrometer
• Inventory control
• Customer service
• Driving
• Warehouse management system
• Materials handling
• Dealership experience
• Computer literacy
• Forklift
• Driving (10+ years)
• Woodworking
• CNC programming
• CNC milling machine
• Materials handling (5 years)
• Sales (2 years)
• Computer skills
Certifications and Licenses
Driver's License
Forklift Certification
OSHA 10
Contact this candidate