Anthony Stokes
Fayetteville, NC ***** *************@*****.*** +1-910-***-****
Professional Summary
Experience: Certificate # 101 6-wheel dump truck with Plow, tailgate spreader and tarp-12/11/2009
Certificate # 102 Tractor with side or rear mower 12/11/2009
CPR/AED/First Aid Training- 11/20/2009-11/20011
Drug Alcohol Training for CDL Employees (Delaware Dept. of Transportation) Builders FirstSource
Work Experience
Truck Driver Class A CDL
Builders FirstSource-Pinehurst, NC November 2024 to Present
Operate 24' and 53' flatbed truck with Moffett. Deliver construction materials for new and existing homes.
Head Custodian
Cumberland County Schools-Fayetteville, NC
September 2023 to Present
•Responsible for inspection and upkeep of campus• request work orders for repair of systems on campus.
•Submits supplies request as needed.
•Operate lawn equipment.
Truck Driver Class A
Best Logistics Group-Kernersville, NC
January 2023 to August 2023
1. Drove Tractor trailer (53 ft) while with Best Logistics. While employed I worked two separate accounts. The first was Scrap metal (OmniSource), and the second was a dry van with (DS Smith). These accounts were at separate times while with Best Logistic.
CDL Driver
Builders FirstSource-Fayetteville, NC February 2022 to January 2023
Flatbed driver w/Moffett Delivering building materials.
Warehouse Specialist.
Position Fort Bragg. -Fayetteville, NC
July 2021 to January 2022
Truck driver
Warehouse Specialist
Computer input specialist
Flatbed Driver/specialized Division
Estes Transport
March 2017 to July 2019
Salary: $20.83 Hourly
Supervisor: Bobby Colandrea: 919-***-****
Operate Tractor trailer driver pick-up and delivery of customer’s commodities, responsible for safe operation of company equipment
City of Fayetteville Number of employees supervised: 6 phone number 910-***-****
455 Grove Street
Fayetteville, NC 28304
Position: Transit Supervisor
From: 3/2015 – 3/2017
Salary: 29,000.00 a year
My supervisor: Tony Means
Job Description: To supervise, assign, review, and participate in the work of staff responsible for providing mass transit service with the Transit Department; and to provide a variety of technical task relative to assigned area of responsibility.
Waste Management Hours of Work: 45-55 Weekly
Tom Starling Road-Houston, TX
November 2014 to March 2015
Phone: 713-***-****
Job Description: Drivers are responsible for the collection and hand loading of residential waste, as well as the transporting of this waste by a front-load or rear-load truck to a landfill site. The position routinely requires extensive near-continuous physical exertions such as repetitive lifting, pushing, and pulling receptacles that weigh from 50 to 75 pounds as part of their rigorous daily routine. Note: The level of physical effort may vary from site to site and in some cases be greater or lesser than documented here. Often, these waste receptacles have no wheels or handles for maneuverability, and the driver must have the physical strength to adjust accordingly. This physically strenuous position involves mounting and dismounting the truck between 800 and 1000 times every shift and constantly exposed to unpleasant sights and smells.
Transit Operator
Cumberland County Schools-Fayetteville, NC December 2013 to November 2014
Pay: $13.00 HRLY
(910) 433 - 1522
4/2/2011 – 4/2013
1.Drive and maintain a transit route and schedule; transport passengers along route; assist passengers in loading and unloading as needed; operate specialized loading and unloading equipment to assist wheelchair passengers.
2.Tactfully greet passengers; answer questions and provide information to the public regarding transit schedules, rules, regulations, routes and other information; refer sensitive inquiries and complaints to appropriate staff.
3.Collect, count and record transit revenues for assigned route; provide change for passengers as necessary.
4.Operate a two-way radio; report accidents and road hazards; provide staff support in accident investigation.
5.Prepare and inspect assigned vehicle for daily operations; check and maintain fluid levels; perform preventative maintenance and minor repairs as necessary; maintain and submit vehicle mileage records as requested.
6.Ensure safety regulations, rules and codes are enforced and obeyed by passengers in assigned vehicle; report persistent violators.
Bus Driver
Cumberland County Schools-Fayetteville, NC
November 2010 to April 2011
Drive gasoline, diesel, or electrically powered multi-passenger vehicles to transport students between neighbourhood's, schools, and school activities.
Check the condition of a vehicle's tires, brakes, windshield wipers, lights, oil, fuel, water, and safety equipment to ensure that everything is in working order.
Comply with traffic regulations to operate vehicles in a safe and courteous manner.
Follow safety rules as students are boarding and exiting buses, and as they cross streets near bus stops.
Position: Truck Driver
TMC Transportation-Des Moines, IA
September 2010 to November 2010
Operate Tractor trailer flatbed truck pick-up and delivery of customer’s commodities, responsible for safe operation of company equipment.
Equipment Operator I
Position
September 2009 to September 2010
302-***-****- Libby Craven
Drives and controls on/off-road equipment to haul supplies to and from the work site. This may include public highway systems.
· Manipulates equipment with integrated mechanical, hydraulic, and electronic systems/controls by coding computers and or adjusting levers, gears, valves, switches and related controls.
· Operates mobile equipment and hand tools to dig, ditch, slope, strip, grade, backfill, mow, and clear and excavate.
· Loads and unloads rock, debris, earth, trees and materials, such as abrasives, de-icing chemicals/ hazardous material using hands, loaders, trucks, hand-truck, forklift, dolly-lift and hoist.
· Operates hand tools such as jackhammers, mechanical tampers, power saws, air compressors, hydraulic drivers, and similar equipment to make general repairs of roads, grounds, and/or structures.
· Performs construction/maintenance and repairs in a variety of labour/trades fields such as carpentry, welding, and masonry.
· Responds to environmental/highway emergency situations to control snow, storm water, hazardous debris, oil spills, etc. on roads, grounds and related areas.
· Uses traffic control techniques to control high/low speed vehicular traffic movement.
Performs preventive maintenance, operational checks, pre, and post walk around inspections, and makes minor repairs/adjustments of assigned equipment; reports damage and /or required maintenance.
May operate draw and swing bridges to permit both water and roadway traffic to pass safely.
HL Trucking & Sons
Bridgeville, DE
Regional Driver (Reefer) 9/2009-9/2010
Contact: Hank Lovett: 302-***-****
MC# 390510
DOT#897680
Operate Tractor trailer driver pick-up and delivery of customer’s commodities, responsible for safe operation of company equipment.
Ft. Bragg Truck Driver
Lear Siegler Service-Fort Bragg, NC May 2008 to September 2009
Material Coordinator Utilize precision-measuring equipment such as callipers, tape measures, and micrometres.
Work involves operating a tractor-trailer, heavy truck, light truck, and/or forklift in support of daily operations responsible for transport/route materials to designated end. user or storage locations~ verify materials against shipping/receiving documents, note and report discrepancies or obvious damage, mark material with identifying information, store, stack and palletize materials, rearrange and conduct physical inventories of stores material, examine stored materials and report deterioration or damage remove material from storage and prepare material for excess using proper procedures, fill requisitions, work orders, or requests for material. Perform other duties as position requires.
Eaton Electrical Inc.-Fayetteville, NC July 2004 to May 2008
Contact: Jamita O’Bannon 910-***-****
Responsible for performing fabrication work on a repetitive and /or non-repetitive basis as required dial in programs manually or existing programs.
Aid other sheet metal fabricators. Operate spot welding machine, power grinder, power sanders, hand-tools, band saw, drills, temporary fix Turing devices, jigs, and fixtures, and other metal fabrication equipment. Forklifts, hand jack and overhead cranes were Also part of job certification.
Inspect parts periodically or as directed utilizing manufacturing information such as drawings/blueprints, make necessary adjustments as required. Keep accurate piece count and other.
Manufacturing Technician
Eaton Corporation Location-Fayetteville, NC
July 2004 to September 2007
Job Duties: feeder operator: electrical feeder operator Assume responsibility for
Overhead crane operation: certification, 11.5 contact Hours, 1.2 continuing Education Units. September 9, 2004.
Perform fabrication work on a repetitive and/or non-repetitive basis. As required dial in programs manually or existing programs. Aid other sheet metal fabricators. Operate spot welding machine, power grinder, power sanders, hand-tools, and band
J.B. HUNT TRANSPORT-Lowell, AR May 2001 to January 2004
over the road driver; pick-up and delivery of
Customer commodities. Responsibilities required for safe operation of company equipment.
Department Of Transportation-Dover, DE
Manufacture Technician
Eaton
Eaton electrical assemble parts for standard and configured power units. Point to point wiring of small power units.
This position can have responsibility in the following
Areas: Assemble, fit, and mount sub-assemblies, components, standard, and near-standard fixed assemblies in Aftermarket and Service Center area. Perform assembly required for test preparation and final inspection.
Assemble and wire units, relay panels, circuit breakers,
And transformers. Bend and install power wires and harness as required. Assemble and install doors and panels. Understanding electrical schematic/drawings/method sheets is necessary to completely assemble products. 1/2004 – 1/2008
RLO2, LLC-Grapevine, TX
Flatbed Driver/specialized Division
Estes Transport-Richmond, VA
Salary: $23.45 Hourly
Terminal Manager: Tyrone Ellerbe. 910-***-****
Operate Tractor trailer driver pick-up and delivery of customer’s commodities, responsible for safe operation of company equipment. Operate and maintain forklift in accordance with company and Osha guidelines.
Education
LAKEWOOD HIGH SCHOOL - Lakewood, NJ
1979
Skills
•Truck driving
•Commercial driving
•; 364 hour Aircraft pneudraulic systems Mechanic course, PDS code ACP,USAF Technical Training school Chanute AFB, Illinois, July 30 1981
Overhead crane operation: certification, 11.5 contact Hours, 1.2 continuing Education Units. September 9, 2004. Forklift training and safety class, August 2004.
•Flatbed
•Tractor-trailer
•Tractor-Trailer
Certifications and Licenses
Doubles/Triples Endorsement
Driver's License
CDL
CDL C
Forklift Certification
CDL B
Overhead Crane Certification
CDL A
Tanker Endorsement
Air Brake Endorsement
Hazmat Endorsement
First Aid Certification