Technicain

Build-Test & Engineering Technician

OBJECTIVE:

To obtain a position within an electronics manufacturing company where I can utilize my experience and skills.

SUMMARY & SKILLS:

Reports & Documentation

MS Office Specialist

IPC-A-61O & J-STD-OO1D Soldering Certificate

PCB Rework & Repair

Clean Room 100%

Experience in ISO 13485:2003, ISO 9001

Machine Sets-up & Calibration

Quality management systems

Mechanical Technician

Familiar with software PROMIS, MES and SAP

PCB Solder Technician

Built new product & fixing all fixture

Sub-Assemblies

Capable of handling and learning tools/equipment necessary for task at hand.

SAP Control software

10 plus years of work experience as an electronic assembler.

Able to work well independently, within a team environment.

10 years plus of experience in electro-mechanical module assembly area.

8 years plus of experience in a class 100% clean-room environment.

Strong skilled and experienced in a manufacturing environment with the ability to perform assembly and testing.

Soldering electronic components on printed circuit boards (PCB) and cables wiring.

Adhere to all ESD requirements and Board Handling.

Pass IPC-A-610 Soldering certification Modules: 1, 2, 3, 4, 6 & 8, and Pass IPC-J-STD-001D standards.

10 plus years’ experience in a cable assembly manufacturing environment.

Strong crimping, connector processing cable assembler and soldering technician skills.

Performs in-process and final inspections of assemblies to assure conformance to quality standards.

Ability to read and follow work instructions, overall knowledge of inventory control.

Excellent skills in Microsoft Office Word, Excel, PowerPoint, and Outlook; capacity to learn additional software.

Able follow 6S and learn manufacturing principles and practices in an ISO 9001 manufacturing environment.

Fully vaccinated against COVID-19.

Work Skills & Experience

Manufacturing Technician, Transducers, Servomex, Woburn, MA. July 2017- July 2025

Cable & Soldering Technicians:

Experience in Manufacturing Medical Device Industry, start-up production environment is a plus.

Self-starter capable of dealing with a variety of tasks in a fast paced, multi-tasking environment.

Rework all components and solder, install for new product, built chassis for medical device components.

Maintain a clean work environment suitable for medical device manufacturing and clean room production.

Experience with mechanical assembly of small electronics modules and sub-components.

Responsible for using Epoxy to a variety of components and use bounding Scotch-Weld Epoxy Adhesive 2216 B/A Gray.

Clean-room environment with smocks, masks, and gloves.

Works under direction and from production schedules, manufacturing procedures, process plans.

Install electrical and electronic parts and hardware in assemblies, using soldering equipment.

Knowledge of all related cable assembly tools such as crimpers, Wire strippers, soldering irons and specialized equipment.

Performs all related operation steps for cable assembly to soldering.

Cutting, Crimping, Stripping, Tinning, Winding.

Cable and harness assembler will follow all process instructions to assemble product.

Applying shrink tubing, connectors, measuring cut lengths.

Follows prints and work instructions to construct cable and wire harness assemblies.

Using Multi meter, Pipe Bender Tube, Strip, Crimp, Molex crimper, Molex connector.

Assemble and rework cable harnesses following engineering documentation with minimal guidance.

Build cable assemblies from blueprints with minimal supervision.

Inform proper personnel of any required equipment maintenance.

Perform soldering, crimping, and stripping tasks. Repair any defective products.

An assembler in this position should be able to build any standard cable from a blueprint, from start to finish.

Performed on final electrical test and mechanical procedure. Cable harness, Wire harness, PCBA testing.

Perform to build new part by diagrams and drawing by orders list.

Computer literacy and experience using Microsoft Office with a focus on Word, Excel, PowerPoint, Smart Sheet, and Outlook; capacity to learn additional software.

Knowledge of all area ESD protocols (Electrostatic Discharge) training and test equipment.

Follow 6S and learn manufacturing principles and practices in an ISO 9001 manufacturing environment.

Complete for certificate Adult First Aid/CPR/AED, Certificate ID: GVKOH7-01/2018.

Manufacturing Operator I, Entegris, Inc. Billerica, MA. May 2020 - July 2021

Management, Manufacturing in this role I will:

Working in a clean room operating multiple machines.

Responsible for quickly learning and performing multiple tasks related to the chemical cleaning of liquid filtration devices.

Sanitization and autoclaving of all media production equipment and areas prior to and following production work.

Perform all job start up and end of job completion tasks and record production information using day by hour tracking sheet.

Responsible for setting up a leaking test and bubble point test.

Ability to work independently to complete specific tasks and to work in a clean room environment.

Ability to work while wearing protective equipment in a chemical cleaning function.

Responsible to use SAP program and report pass down act.

Bulk Manufacturing Operator II (Medical Device), BD (Becton, Dickinson), Woburn, MA. November 2019 - April 2020

Responsibilities that a production operator working within manufacturing will perform.

Read, understand, and follow all Standard Operating Procedures and Batch Records.

Set up all equipment including Brush Washer, Centrifuge, Rotary Vacuum Dryer, Fitz mill.

Performing in-line testing utilizing various measuring equipment, Hydrometers, Tachometers, Moisture Analyzers, Snap 50.

Complete all relevant device history records (DHR) as required, complying with quality system requirements.

Manufacturing Operator II, Abbott Medical Device, Westford, MA. (Assignment Ended) January 2019 – November 2019

Performed for mechanical assembly of a medical device.

Build assembly and subassemblies of medical imaging systems.

Build and test power tray subassemblies according to procedures and assembly drawings.

Perform electro-optical/electro-mechanical assembly.

Perform cable connection and installation. Perform system electrical safety test.

Perform for DOC Holster and Tableside Control test with hardware and program by procedure.

Point to point wiring, soldering. Inspection Technique.

Build new PC, set up, run a test and scan the virus until complete system work.

Some minor mechanical assembly will also be required.

Test Technician, M/A-COM Technology Solutions, Inc., Lowell, MA. June 2015 – January 2017

Perform a variety of functions in the production of semiconductor devices in a class 100% clean-room environment.

Safely and efficiently loads materials into fabrication tools and removes them when equipment cycles are completed.

Responsible for monitoring equipment operation, inspecting final products, cleaning the work environment, and performing data entry.

Set up Fabrication machinery and prepare for operation.

Set-up, operate, load, and monitor specialized equipment to ensure quality products are produced.

Enters production data in fab tracker, MES, and SAP software.

Knowledge of and ability to follow 5S, LEAN a plus. Other duties as needed or assigned.

Engineering Technician, Quanttus, Inc., Cambridge, MA. May 2014 – October 2015

Conducted mechanical assembly and electrical repair of power products and sub assemblies in a class 100% clean room.

Performed point to point wiring, dresses cable and performs repairs, modifications, and upgrades to units.

Built, tested, soldered, and reworked prototypes, sub-assemblies, and PCBs.

Performed to build all components Watch for Health (Smart Watch), Wellness, Fitness, and electronic medical record (EMR) Troubleshooting, Firmware update electrical test.

Built new fixtures, fix all fixtures, soldering fixtures and building products for medical devices.

Working under the ISO 13485: 2003, Medical devices, and Quality management systems.

Assembler Solder/ Tester, ZOLL Medical Corporation, Chelmsford, MA. November 2013 – March 2014

Performed test and entering data and move to next operation.

Built paddles for medical devices, Reported problems or failures to unit, PCB touch-up, rework, and repair.

Build circuit boards, cables, electro-mechanical assemblies by using blueprint, wire run list, schematic & engineering sketch mark. Implement Engineering change order by processing ECOs.

Point to point wiring, Fine pitch soldering. Inspection Technique

Read and understand electronics assembly drawing, B.O.M and processing sheets.

Utilized microscope for soldering and inspection of PC Boards and wiring by drawings and blueprints.

Worked under ISO 13485 and ISO 9001.

Wafer Fabrication Technician II, Skyworks Solutions Inc., Woburn, MA. July 2010 – May 2012

Perform a variety of functions in the production of semiconductor devices in a class 100% clean-room environment.

Set-up, operate, load, and monitor specialized equipment to ensure quality products are produced.

Enter production data in fab tracker, use PROMIS software.

Responsible for monitoring equipment operation, inspecting final products, cleaning the work environment, and performing data entry.

Safely and efficiently loads materials into fabrication tools and removes them when equipment cycles are completed.

Maintains a safe work environment and enforces all safety protocols.

Knowledge of and ability to follow 5S, LEAN a plus. Other duties as needed or assigned.

Other Experiences

PCB Rework Technician

Cisco Systems,

Tewksbury, MA

November 2010 –

February 2011

ElectroMechanical Technician

Analogic Corporation

Peabody, MA

September 2009 –

October 2010

ElectroMechanical Assembler

Curtiss-Wright Controls Inc.

Littleton, MA

October 2008 –

December 2008

ElectroMechanical Assembler

Comdel, Inc.

Gloucester, MA

April 2006 –

May 2008

Education: Training & Certifications

LARE Institute, Andover, MA. February 2016

Certificates:

ESD Control for Electronics Assembly

General Safety in Electronics Assembly DVD-11C

Through Hole Solder Joint Quality Standards

PTH-F Class 3

Surface Mount Solder Joint Quality Standards

SMT-F Class 3

Component Identification DVD-64C

Component Number Codes

The Seven Sins of Hand Soldering DVD-49C

Millennium Training Institute, Woburn, MA. May 2013

Network System Specialist- Received Certificate, CompTIA A+ & CompTIA Network+

Microsoft Office Specialist (MOS) Received Certificate MC ID License: 9142173 May 2012

Belford High School

Diploma, 2009, Received Certificate

LARE Institute, Andover, MA. December 2008

Electronic Certification: IPC-A-610 & IPC-J-STD-001D Certification Received Graduated

Other:

U.S. Citizenship April 2007

Contact this candidate