Electrical Engineer Engineering

Location:

Central, Philippines

Salary:

2800 US DOLLAR

Posted:

August 10, 2025

Contact this candidate

Resume:

JENIEL E. POSA

Blk-** L-* Carmenville Subd., Mansilingan, Bacolod City 6100, Philippines

Mobile No: +639*********

Email Add: ******.****@*****.***

Professional License No. 0005252

Registered Electrical Engineer

Desired Position: Electrical Engineer

EDUCATION ATTAINMENT:

Bachelor’s Degree in ELECTRICAL ENGINEERING

West Negros University (WNU)

Bacolod City, Philippines

Graduated year 1995

PROFESSIONAL EXPERIENCES:

Sumec Philippines

Acienda Carmen,Brgy San Isidro, Calatrava, Negros Occidental Philippines QA/QC Supervisor

August 1, 2024 – June 27,2025

I was assigned at Calatrava, Negros Occidental, SUMEC COMPLETE EQUIPMENT AND ENGINEERING CO.LTD (CALATRAVA 137 MWAC SOLAR POWE PROJECT)

Duties and Responsibilities:

● Supervised and inspection the electrical works refer to approved shop drawing.

● Inspection material receiving deliverer on site like, Transformer, 400V Switchgear Panel, Gas Insulation System Equipment, etc

● Inspection of installation of Transformers, 400V Switchgear panel and LV panel, Gas Insulation System, etc.

● Supervised and monitoring for the cable pulling installation for each equipment.

● Supervised the inspection of testing for the equipment like, Transformers, 400 V Switchgear panel, Current transformer, Voltage transformer, etc.

Bureau Veritas, S.A.

The North Block Reclamation Area, Brgy .12, Bacolod City, Negros Occidental QA/QC Electrical Engineer

July 17, 2023 – Julu 22,2024

I was assigned at SM Bacolod, Bacolod City Project-Based (The North Block Project) Duties and Responsibilities:

● Supervised and inspection the electrical works refer to approved shop drawing.

● Responsible in Bidding Process as per Contract Package by the SM Client,like secure the bid plan from the designer,conduct prebid conference to the bidders, bid evaluation, etc.

● Attended the meeting with the SM Client and Contractors to discussed the concerns and status of the project.

● Imposed the Non Compliance Report (NCR) to the subcontractor as per shop drawing.

● Submission of Request for Approval (RFA) and Request for Information (RFI) to the consultant if materials and shop drawing are necessary.

● Secure the materials and worked activities as per shop drawing approved by the consultant. J. E. ABRAHAM C. Lee Construction and Development

Lacson Highway, Barangay Mandalagan, Bacolod City

Electrical Engineer

January 2,2023 - April 15,2023

I was assigned at Casamira Tower Project.

Duties and Responsibilities:

● Supervised and inspection the electrical works refer to approved shop drawing and ID plans.

● Ensure properly to imposed daily activities and coordinate with the client (Cebu Landmaster Inc.)

● Attended the meeting with the client to discussed the concerns and status of the project.

● Always imposed the housekeeping before and after the Work and safety first policy.

● Project handled likes Casamira Tower, The Row MAll, and Citadines Tower. Prime Pacific Marine and Industrial Services Corp. 411M.Naval St., Navotas City

Electrical Engineer

April 18,2022 - December 10,2022

During my tenure in Prime Pacific Marine and Industrial Services Corp., I was assigned in Multi Purpose Building Phase 1A, Phase 1B and Phase 1C.

Duties and Responsibilities:

● Supervised, inspection and monitoring the electrical works refer to approved shop drawing.

● Responsible to MRF(materials request form) to ensure the works would not stop.

● Secure the activities today in site in proper coordination to other contractor.

● Ensure properly imposed daily activities not delay on schedule.

● Keep safety procedure during works.

● Project handled likes Multi Purpose Building Phase 1A,Phase 1B and Phase 1C. Longwind Development Corporation Design and Build

Ibabao Estancia Mandaue City, Cebu

Electrical Engineer

Janaury 21,2021 - December 15,2021

During my tenure in Longwind Development Corporation, I was assigned in Zamboanga City (YUBENCO SUPERMARKET Project) .

Duties and Responsibilities:

● Review and checked the approved Shop Drawing for fitout works.

● Inspection, monitoring and supervised the electrical works refer to the approved shop drawing on site.

● Responsible of daily activities in electrical works. Sino Asia Belt Road Development Corp.

Salcedo St., Makati City

Electrical Engineer

February 28, 2020 - April 15,2020

During my tenure in Sino Asia Belt Road Corporation, I was assigned Baclaran (Chinese Restaurant). Duties and Responsibilities :

• Review and checked the approved Shop Drawing for fit- works.

• Inspection the electrical works based on the approved shop drawing.

• Evaluate the materials for approval based on the technical specification in the project. Terp Asia Construction Corporation

Lapu-lapu City, Cebu City

QA/QC MEPFS

March 18, 2019 up to December 20,2019

During my tenure in Terp Asia Construction Corporation, I was responsible for:

• Review and checked the approved Shop Drawing for construction works.

• Inspection the mechanical, electrical, fire protection, water line and plumbing system shaft refer to the approved shop drawing in site.

• Evaluate the materials for approved refer to the technical specification in the project.

• Inspection the electrical, mechanical, fire protection, water line and plumbing system installation in site.

• Reviewed and checked the existing method statement as a procedure of works in site. United Caddtech Philippines Inc.

New Clark City

Capas,Tarlac City

Site Electrical Engineer/Electrical Inspector

July 11, 2018 up to March 11,2019

During my tenure in UnicaddtechPhlis, Inc under the Filipinas Dravo Corporation, I was responsible for:

• Checked and review the specification details for electrical.

• Responsible to make an approval for the materials refer to the specification details for electrical.

• Responsible to make a Cover letter and evaluation for the materials approved refer to the specifications for electrical, brochure submitted by the constructor, sample material and documents transmittal form coming from the contractor.

• Inspections the site areas where the contractor works and checked refer to the specifications.

• Responsible for the approval of (RFIT) Request for inspection and testing which the contractor submitted.

• Responsible for the approval of (RFA) Request for Approval the materials submitted by contractor.

• Project handled like Stadium Center and Aquatic Center in Capas, Tarlac City for Seagame 2019. Saudi Naval Support Co.Ltd

“Marine Navigation Control Tower”

Ras Al-Khairproject InJubail,Kingdom of Saudi Arabia Site Electrical Engineer

November 19, 2014 up to March 24, 2017

With Saudi Naval Support Company, I am a project in-charge of Marine Navigation Control Tower in Ras Al- khair, Jubail,Kingdom of Saudi Arabia as Site Electrical Engineer on November 19,2014 up to March 24,2017,my duties and responsibilities as follows:

• Site Generator ( 125kva, 165kva and 300kva) –supervise on monitoring, maintenance and operation of generator needed on site during work( e.g. oil change, fuel change, starting of genset).Make time record every oil change,fuel change, checking of fuel level on generator and refilling diesel fuel to labor.

• Prepare submittal form on approval materials and drawing both on electrical and mechanical.

• Prepare and submit a request for inspection (RFI) form during and after electrical and mechanical work to consultant prior to proceed on the next implementation.

• Prepare to inspection of delivery materials on site for (RFI) to submit to consultant before implementation.

• Make a report to project manager pertaining of electrical and mechanical work and status.

• Responsible for the supervision in the implementation on electrical and mechanical works on site such as low voltage and low current for electrical. For supervision on mechanical works on site such as water supply, sewage system, hvac system and firefighting system.

• Supervision for installation of 250KVAgenerator (Diesel Horizontal Pump and Electrical Horizontal Pump, Jockey Vertical Pump, Booster Pump, Sump Pump and Manual Transfer Switch at the Pump Room.

• Experience in testing and commissioning of the pad mounted transformer, main distribution board, circuit breaker, generator set, mainlow voltage switchgearand low voltage cable. Walid A.L. Samman Co., Ltd.

“AL-QUNFUDAH TECHNICAL COLLEGE PROJECT”

Jeddah, Kingdom of Saudi Arabia

Site Electrical Engineer

May 25, 2011 up to June 25, 2013

With WalidSamman Company, I am a project in-charge of Al-Qunfudah Technical College in Jeddah, Kingdom of Saudi Arabia as Site Electrical Engineer on May 25, 2001 up to May 25, 2013, my duties and responsibilities are as follows:

• Responsible for the monitoring the materials of electrical works they are installed in site.

• Responsible for the drawing for approval to the consultant in site.

• Responsible for the supervision in the implementation on electrical works such as, lighting layout, power socket layout, fire alarm layout, data layout and others to complete the project.

• Design, implement, maintain, and improve electrical instruments, equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.

• Inspect completed installations and observe operations, to ensure conformance to design and equipment specifications and compliance with operational and safety standards.

• Prepare specifications for purchase of materials and equipment. NEGROS BIOCHEM CORP.

Neg. Occ., Philippines

Site ElectricalEngineer

June 2008 up to Feb.2010

During my tenure with Negros Biochemk9, I was responsible for:

• In-Charge of electrical details in AutoCAD.

• Responsible for the drafting, drawing and the preparation of plans.

• Responsible for the preparation of schedules, scope of works, labor cost and estimates for the safekeeping the integrity of documents and plans.

• Responsible for the design of the project involving electrical engineering practices, procedures, installations and methods in accordance with the provision of the Philippines Electrical Code.

• Responsible for the supervision in the implementation on electrical works, installations and methods in accordance with the provision of the Philippines Electrical Code.

• Estimate and calculate the motor load supply, specification, schedule of load, single line diagram, size of wires and pipes in accordance with the provision of the Philippines Electrical Code.

• Collaborate with electrical engineers and other personnel to identify, define, and solve developmental problems.

• Evaluate engineering proposals, shop drawings and design comments for sound electrical engineering practice and conformance with established safety and design criteria, and recommend approval or disapproval.

• Draw or modify diagrams and write engineering specifications to clarify design details and functional criteria of experimental electronics units.

• Plan, schedule and monitor work of support personnel to assist supervisor. NATIONAL OFFICE FOR ENGINEERING CONSULTANCY

Dammam, Kingdom of Saudi Arabia

Electrical Engineer

January 2006 up to February 2008

AL-HADDAD ENGINEERING CONSULTANT OFFICE

Dammam, Kingdom of Saudi Arabia

Electrical Engineer

September 2001 up to September 2005

During my tenure with Nat’l Office for Engineering and Al-Haddad Engineering, I was responsible for:

• In-Charge of electrical details in AutoCAD.

• Making various projects such as residential, commercial and workshop.

• Scheduling and calculating of loads, specification, single line diagram, sizes of wires and pipes.

• Inspection of electrical installation in the project such as 3-stories commercial building, 2-stories residential building and 1-storey workshop building.

• Prepare and review engineering plans, designs and circuit diagrams for projects.

• Execute various projects, ensuring compliance with safety requirements and Saudi Arabian standards.

• Identify and propose improvements to existing electrical systems. MOHAMMED AL-MOJIL GROUP (MMG)

“YANPET - POLYMER PROJECT”

Yanbu, Kingdom of Saudi Arabia

Instrument Technician

July 1999 up to May 2000

With MMG, I was assigned under the project of Yanbu National Petrochemical Co. (YANPET) for Polymer Project in Yanbu, Kingdom of Saudi Arabia as Instrument Technician on July 1999 until May 2000, my duties and responsibilities are as follows:

• Battery monitoring for charging & discharging process and recording the result of the acid level of battery.

• Installing of airline supply for instruments such as flow transmitter and control valve.

• In-charge of punch listing of electrical works, painting the support of pipe in lighting, switches, outlets and other works which is given by the Contractor.

• Installing of electrical lighting, switches, outlets and cable pulling. ELECTRODYNAMICS CONSTRUCTION AND DEV’T.INC.

Pasig City, Philippines

Cadet Engineer

Oct. 1997 up to Dec. 1998

During my tenure with Electrodynamics, I was responsible for:

• In-charge as assistant cable splicer for the termination of wire and cable for the supply of load of the equipment.

• In-charge as assistant field engineer and inspection the electrical installation on site based on the electrical plans.

• Preparing of bill of materials in electrical works that will installed for the project.

• Scheduling of works & manpower to determined the daily accomplishment of the project.

• In-charge of perimeter lighting installation on site. Trainings & Seminars Attended:

• Solar Night Light Assembly

Technical Education and Skills Development Authority TESDA Online Program

December 12,2019

• Packaged Air Conditioner Unit Servicing

Technical Education and Skills Development Authority TESDA Online Program

November 27,2019

• Diesel Engine Tune up

Technical Education and Skills Development Authority TESDA Online Program

November 29,2019

• Practice for Grounding Industrial & Commercial Power Systems and Arc Flash Analysis & Mitigation

Planta Centro Bacolod

Hotel & Residences Araneta Street, Bacolod City

July 20,2018

• Fundamental on Harmonics,Voltage Drop Analysis, Arc Flash Safety in Manufacturing, Residential Design & Installation of Renewable Energy System & Road to Become a Professional Electrical Engineer

TAIYO YUDEN, MEZ 1, Barangay Ibo,6015, Lapu-Lapu City, Cebu, Philippines September 28, 2019

Computer Skills:

• Electrical Engineering Design Software: AUTOCAD

• Operating Systems: Windows XP, Vista, Windows 7

• Windows Applications: Microsoft Word, Microsoft Excel, Planswift app

• Driving

Personal Information:

Date of Birth : August 6, 1969

Gender : Male

Civil Status : Married

Nationality : Filipino

Language Spoken : English, Filipino and little Arabic References: