Design Engineer Senior Piping

Constantin Georgescu

Senior Piping Engineer

CANDIDATE PROFILE

Current Location:

Ploiesti, Prahova County, Romania

Submitted For: Senior Piping Engineer

Years of Experience: 30+ years

Availability: Available

Mobile : +40-743******

E- mail: *******@*****.*** ; *****************@*****.*** PERSONAL INFORMATION

Date/Place of birth: 15.02.1959 / Targoviste, Dambovita, Romania Civil Status: Married, one child

Languages: English (good), French (medium), Italian (basic), Russian (notions) PROFESSIONAL SUMMARY

More than 30 years of experience in Piping Engineering and Project Management, in Upstream and Downstream Oil and Gas industries like refinery plants, petrochemical plants, oil and gas production industries, pump stations and fuel stations, according with European & American Standards and Codes (P.E.D., EN 13480, ASME, ANSI, API – Codes, ISO, BS, EN, DIN, Norsok – Standards, Snamprogetti design standards, KOC standards, Technip design standards, DEP -Shell Standards, OMV PETROM engineering standards, Piping Classes Specifications) etc., which of more than 10 years of site experience for Romanian refining installations execution. Good working knowledge of codes and standards relating to oil and gas industry.

Work experience also includes assignments in Qatar, France, Italy, Kuwait, India, UAE. Good exposure to execution, erection and maintenance of cylindrical tanks, column, heat exchangers, separators, etc. Strong technical and practical abilities as well as supervisory skills. Pro-active team player, easy to integrate in multi- cultural environments. Resilient personality, calm and flexible, able and confident to work with minimum supervision, on multiple tasks. Easy learner, good synthesis/reporting capacity, cost conscious and results orientated. EDUCATION

M.Sc. Mechanical Engineer, Polytechnic University, Bucharest, Romania 1988 Machine Building Technology Faculty

PROFESSIONAL QUALIFICATIONS / REGISTRATIONS

SOLIDWORKS 2017/2018 –Company in house and training, Waller Office, Texas, USA, 2018 CADWorx 3D Plant Design – Company in house and training, Ploiesti Office 2013 Project Controls “Progress and Performance Measurement” - Company in house and training, Ploiesti Office 2011

-"Quality Review of Design Errors and Their Prevention"- Company in house and training, Ploiesti Office 2011

-3D Pelican Forge Support Modeller for PDS – Company in house and training, Ploiesti Office 2008

-Intergraph Equipment and Piping Design (PDS) – Company in house and training, Ploiesti Office 2007

-MicroStation J – Company internal training, Bucharest Office 2007

-INSEMEX (Romanian National Institute for Mine Safety and Explosion Proof Protection) Certificate 2006

(Authorization for design and construction for equipment located in hazardous areas)

-Quality Assurance – Company internal training, Bucharest Office 2000 SKILLS

• Highly motivated and driven by certain basic principles and strongly believe in fundamental values & self-respect;

• Achievement oriented with excellent people management/interpersonal skills;

• Very good collaboration with my working fellows, with my superiors, with clients and vendors;

• Ability to adjust easily to change, team motivation and meet strict deadlines; SOFTWARE

• SOLIDWORX 2017/2018

• MS Office

• AutoCAD 2018

• MicroStation J

• MicroStation V8i

• PDS

• Pelican Forge

• Smart Plant Review

• Navisworks

PROFESSIONAL EXPERIENCE

PAUL WURT ITALIA S.p.A August 2023-present

Senior Piping Design Engineer

Assignment HIDERABAD-INDIA

HAZIRA - COKE OVEN STAMP CHARGE BATTERY 1&2

• Coordination of 3D MODEL using the Company Monitoring Procedure, solving the issues for all disciplines, manly for piping.

• Reviews and provides comments / approval on design deliverables / packages prepared by Engineering Subcontractor, in line with the scope of work requirements, Company’s specifications and international codes / standards.

• Reviews Plot plan, Piping General Arrangement drawings, Isometrics, Tie-in Schedule, Material Take-off, etc.

• Perform additional work activities as directed by line manager. SPG STEINER GMBH SIEGEN-Ploiesti Subsidiary May 2022- June 2023t Piping Design Engineer –Checker

KANGAN OLEFIN PROJECT

KALYON -Kuzey Marmara Underground Gas Storage Expansion (Phase III) Project Reviews and provides comments / approval on design deliverables / packages prepared by Piping Design Team, in line with the scope of work requirements, Company’s specifications and international codes / standards.

• Reviews Plot plan, Piping General Arrangement drawing, Isometrics, Tie-in Schedule, Material Take-off, Stress reports, Supports material requisition, Vendor Drawings, material selection, data sheets & specifications

• Ensures that all technical review comments are incorporated in the design deliverables / packages.

• Reviews and endorses design change requests, concession request and waiver to project specifications, related to the discipline.

• Provides inputs to line manager on change orders and ensure safe, economical and technically sound decisions. ARCHIRODON Group NV, Dubai - Client: ADNOC, UAE January 2020 – December 2021 Lead Design Engineer

BAB 485 MBD SUSTAINABLE FACILITIES PROJECT

• Reviews and provides comments / approval on design deliverables / packages prepared by Engineering Subcontractor, in line with the scope of work requirements, Company’s specifications and international codes / standards.

• Reviews Plot plan, Piping General Arrangement drawing, Isometrics, Tie-in Schedule, Material Take-off, Stress reports, Supports material requisition, Vendor Drawings, material selection, data sheets & specifications .

• Ensures that all technical review comments are incorporated in the design deliverables / packages.

• Reviews and endorses design change requests, concession request and waiver to project specifications, related to the discipline.

• Provides technical / expert support for projects various activities, including bids evaluation, review of pre-qualification of Subcontractors / Contractors, Vendors or Suppliers, commissioning and handover of project facilities to end-users, etc.

• Adheres to Company HSE policy, procedures, regulations and objectives as they relate to area of responsibility. Ensures that work undertaken is performed in a safe and environmentally sound manner.

• Participates in various workshops and associated closeouts, e.g. Design Review, 3D Model Review, HSE Studies, Constructability Review, etc.

• Participates in vendor drawing reviews and assists in resolving technical issues raised during FAT/SAT testing.

• Ensures safe, economic and technically sound decisions related to area of responsibility.

• Assists in resolving field engineering queries during construction phase.

• Verifies of scope of work for any new modifications, new packages and review Contractor’s proposals.

• Provides on-site engineering consultation, as applicable, during construction, pre-commissioning and commissioning stage; full involvement during performance test run for the plant.

• Perform additional work activities as directed by line manager. AECOM Romania-Bucharest September 2017 – December 2019 Lead Piping Engineer

Assignment to J. W. Williams Inc. Office, Waller, Texas USA

• 3D modeling equipment (Exchangers, Separators, Scrubbers, Skids) using SOLIDWORKS 2017/2018.

• Extraction of Equipment and Skid drawings, annotation and dimensioning, according with JWW's procedures and requirements.

• Checking the drawings made by other design team members using the company's procedures and checklists. PERMIAN PERIDOT CTB

• Piping coordination and checking design, piping routing and supporting, GA’s using CAD Worx 2017, isometrics extraction, checking and issuing.

COP-ZIA HILLS

• Piping coordination and checking design, piping routing and supporting, GA’s using CADWorx 2016, isometrics extraction, checking and issuing.

COP-SENM

• Checking design, piping routing and supporting, GA’s using CADWORX 2016, isometrics extraction, checking and issuing.

OXI-Corral Fly and Draw Project

• Reviews Plot plan, Piping General Arrangement drawings, Isometrics, Tie-in Schedule, Material Take-off, Stress reports, Supports material requisition, Vendor Drawings, material selection, data sheets & specifications

• Ensures that all technical review comments are incorporated in the design deliverables / packages.

• Reviews and endorses design change requests, concession request and waiver to project specifications, related to the discipline.

Pure World Engineering Ploiesti, Romania January 2017 – July 2017 Lead Piping Engineer

• Define line pipe specification;

• Elaborate piping material component specifications;

• Control of piping engineering document subcontracted;

• Develop key plans, plot plans and layout studies

• Checking and issuing isometrics (maintain Line List, ISO's tracking reports,

• maintain a master ISO's issue book);

• Prepares technical and contractual correspondence in the form of formal letters and transmittals for review and approval by the Lead Engineer;

• Elaborate insulation, painting and protection specifications;

• Define plant fireproofing specification;

• P&ID's mechanical implementation / assist process engineer for flow sheets revision;

• Scheduling and co-ordination between disciplines for interference checking;

• Assists in developing documentation to fulfil discipline project requirements AMEC FOSTER WHEELER, Kuwait - CLIENT: KOC, Kuwait May 2014 – December 2016 Piping Design Engineer

North Kuwait Projects for GC 29, GC 30, GC 31 and Manifold Group Trunk line for GCs.

• Perform Project Management Consultancy (PMC) services in the role of Piping Engineer for oil & gas and petrochemical projects. The responsibilities include the review of Engineering Contractor’s design work / deliverables and provide necessary comments / approval, while fully meeting COMPANY’s requirements by assuring quality deliverables in a timely manner.

• Monitors and manages the works carried out by Engineering Contractor during FEED and Detailed Engineering phases, which includes review of deliverables, attending meetings, monitoring resource levels, compliance to codes and standards and Company specifications.

• Reviews and provides comments / approval on design deliverables / packages prepared by Contractor, in line with the scope of work requirements, Company’s specifications and international codes / standards.

• Reviews Plot plan, Piping General Arrangement drawing, Isometrics, Tie-in Schedule, Material Take-off, Stress reports, Supports material requisition, Vendor Drawings, material selection, data sheets & specifications

• Ensures that all technical review comments are incorporated in the design deliverables / packages.

• Reviews and endorses design change requests, concession request and waiver to project specifications, related to the discipline.

• Provides inputs to line manager on change orders and ensure safe, economical and technically sound decisions.

• Provides technical / expert support for projects various activities, including bids evaluation, review of pre-qualification of Subcontractors / Contractors, Vendors or Suppliers, commissioning and handover of project facilities to end-users, etc.

• Provides feedback to COMPANY on selection and shortlisting of new / replacement Contractor’s engineering staff.

• Coordinates, supervises and evaluates technical studies and special investigations carried out by third party, including Survey and Reports, Skids, OEM documents, condition assessment, fit for purpose Pipe routing Studies, calculations, vibration issues, establishing adequacy, facilities/systems upgrading, replacement requirements etc.

• Identifies areas of improvement for the design contractor and articulate an action plan with the involvement of both the project engineer and the design contractor representative.

• Provides technical advice and support to the operation group, in order to ensure that the plants integrity and long term availability are maintained, areas of concern are identified by the appropriate party and optimum / cost effective solutions are adopted.

• Follows up with Contractor’s planning and progress on daily basis.

• Provides technical support to resolve pending / outstanding issues.

• Coordinates with the Core Team, Company, Contractor and other disciplines, as required.

• Adheres to Company HSE policy, procedures, regulations and objectives as they relate to area of responsibility. Ensures that work undertaken is performed in a safe and environmentally sound manner.

• Participates in various workshops and associated closeouts, e.g. Design Review, 3D Model Review, HSE Studies, Constructability Review, etc.

• Participates in vendor drawing reviews and assists in resolving technical issues raised during FAT/SAT testing.

• Ensures safe, economic and technically sound decisions related to area of responsibility.

• Assists in resolving field engineering queries during construction phase.

• Verifies of scope of work for any new modifications, new packages and review Contractor’s proposals.

• Provides on-site engineering consultation, as applicable, during construction, pre-commissioning and commissioning stage; full involvement during performance test run for the plant.

• Reports on Engineering Contractor’s work to line manager.

• Perform additional work activities as directed by line manager. URS Engineers & Constructors Bucharest, Romania August 2013 – April 2014 Supervising Design Engineer

Project: Dawson Spectra Gas Plant

• checking activities: GA’s, Plot Plans, Isometrics;

• interference checking with existing piping, structural, electrical, using Smart Plant Review;

• equipment, piping and structure design modelling in 3D-PDS, according to P&ID’s and Project Specifications; Pure World Engineering Ploiesti, Romania February 2013 – July 2013 Piping Design Engineer

Project: Mobile Skid Mounted Gas Turbine Power Generation Unit– South Oil Company of IRAQ

• piping studies, piping layouts, piping GA’s using AutoCAD;

• piping typical assemblies, using AutoCAD

• standard pipe support collection

• bill of materials, data sheets, piping specifications; Pure World Engineering Ploiesti, Romania August 2012 – January 2013 Piping Design Engineer

Project: FEED Closed Drain System at BCDS – Abu Dhabi Company for Onshore oil Operations (ADCO)

• piping studies, piping layouts, piping GA’ s for construction and demolition lines, using AutoCAD;

• bill of materials for all new drain lines;

Pure World Engineering Ploiesti, Romania - ENERECO S.p.A., Fano, Italy November 2011 – July 2012 Piping Design Engineer

Project: Onshore Burun Field Oil Development - Phase 2 (FEED) - Western Turkmenistan

• study of existing documentation regarding the project;

• make new plot plans using AutoCAD 2D for 8 new field station;

• make new drawing for production manifold, gas lift manifold and water injection manifold according to P&ID’ s;

• make new drawing for field trunk lines according to P&ID’s;

• modification, updating and completing these drawings with new information about equipment, manifolds, client requirement;

• piping studies and layouts for fields trunk lines (production, gas lift and water injection, new field stations and separation and pumping plant ( SPP);

• design and detailed drawings for launching and receiving pig stations;

• equipment, piping and structure design modelling in 3D-PDS, according to P&ID’s and plot plans; PureWorld Engineering Ploiesti, Romania August 2011 – November 2011 Senior Piping Design Engineer

Project: Revamp N-Hexan Unit- VEGA Refinery

• preparing the programs of examination, tests and investigations to assess the technical state for piping, according with Romanian codes;

• piping studies;

Petroconsult S.R.L. Ploiesti, Romania working for ECI Inginérie, Rouen, France March 2011 – July 2011 Piping Design Engineer

Project: Centrale de Komsilga Sonabel Burkina Faso

• MicroStation 3D equipment, structural and piping modelling in accordance with P&ID’s;

• piping studies and layout for water cooling, fuel, lube-oil, utilities;

• interference checking with existing piping, structural;

• drawings extraction, isometrics issuing;

URS Engineers & Constructors Bucharest, Romania June 2010 – March 2011 Supervising Design Engineer

Client: Tennessee Valley Authority, Brownsville, Tennessee, US (Lead Office WGI Princeton) Project: John Sevier Combined Cycle Project

• PDS piping modelling in accordance with P&ID’s, for Gas Turbine & HRSG Area;

• interference checking with existing piping, structural, electrical, using Smart Plant Review;

• 3D Pelican Forge support design and modelling;

Washington E&C Bucharest, Romania - Client: Qatar Gas September 2007 – June 2010 Piping Design Engineer IV

Project: Common Sulfur

• piping study lay-out Conveyor 41 Area- Fire Water System;

• piping Design Modeling using 3D-PDS;

• extraction of isometrics from PDS, ISO’s checking, Isometrics issuing ;

• checking piping routing and supporting using Smart Plant Review; Assignment to Ras Laffan-Qatar September 2008 – October 2009

• Performing walk down in site, checking and marking P&ID ;

• 2D AutoCAD detailed piping drawings, details and piping supports design;

• Field survey and updating drawings with survey output;

• Basic and detailed engineering (P&ID’s, equipment and piping arrangement, isometrics, bill of materials, pipe supports, 3D modelling);

• Coordination between design and construction;

• Performing detail design and construction;

• Inter-disciplines coordination for Mechanical, Civil, Structural, Instrumentation and Piping Department;

• Implementation in 3D Model of engineering design solutions;

• Updating and Red line P&IDs, Rework Steam and Condensate System, Updating Plot Plan Drawings,

• As-Built Isometric and Plot Plan Drawings, Finding proper solutions to solve holds and clashes in accordance with Client procedures;

• Preparing Walk-Down Packages.

Project: Constellation Power Source Generation

• P&ID Drawing using Micro Station 2D, in accordance with mark-up; Project: AREVA, Imouraren Uranium Project - Niger

• taking active part in feasibility studies – Material Take- Off; ROMPETROL LOGISTICS S.A. –Truck Services Ploiesti Branch, Romania February 2005 – September 2007 Chief Designing Department

Authority Engineer for projects conformity authorization - authorized by “The National Authority for Control and Approval of Pressure Vessels and Hoisting Equipment” – ISCIR – Romania for designing, checking and conformity assessment and authorization of GPL installation according to ISCIR PT C8-2003.

• supervising of this department‘s activity;

• designs, elaboration and execution of GPL installations for constructions (unfamiliar buildings and so on) and fuel stations;

• almost any detail work for the up-named types of installations;

• supervising for execution and mounting details;

• responsible for the final function tests and checking for elaborated designs;

• supervising offers and estimation;

PROGAZ DISTRIBUTION S.A. Campina, Romania September 2003 – February 2005 Chief Designing and Technical Department

• Authorized GR. I D by ANRGN, Romanian National Authority for natural gas distribution.

• supervising of this department‘s activity;

• designs, elaboration and execution of natural gas installations for constructions (unfamiliar buildings and so on);

• almost any detail work for the up-named types of installations;

• supervising for execution and mounting details;

• responsible for the final function tests and checking for elaborated designs;

• supervising offers and estimation;

PETRO-CONSTRUCT S.A. Ploiesti, Romania August 2002 – September 2003 Site Manager

CLIENT: S.N.P. Petrom S.A. – Branch Ploiesti

Project: Setting-up distribution of natural gas in Mizil-Prahova

• coordinates project requirements with Operations/Disciplines to assure adequate staffing consistent with the scope, schedule and budget of the project;

• organizes manpower for the project; coordinates overall operations;

• directs and delegates to the project team;

• anticipates, recognizes and identifies key issues surrounding problems and establishes objectives and priorities in solving them;

• determines solutions to problems and directs their implementation and maintains quality assurance in compliance with company philosophy and requirement;

• co-ordinate technical and administrative activities for a site;

• field and shop support;

TMUCB S.A. Bucharest- Subsidiary Ploiesti, Romania July 1996 – July 2002 Chief Designing Department

Specific project of petrochemicals field (tanks, columns, heat exchangers, piping, metallic structure) for various refineries in Romania: Petrotel-Lukoil Refinery, Vega Refinery, Astra Refinery, Brazi Refinery, etc.

• supervising of this department‘s activity.;

• coordinates engineering interface activities with other disciplines and departments;

• institute Design Review teams as required to assure quality of engineering conformance with project definition and to comply with regulatory requirements;

• complete design activity including calculation sheets, technical specifications for materials, parts list; assembly drawings, subassembly drawings, detailed execution drawings;

• performing “As Built” documentation;

TMUCB S.A. Bucharest- Subsidiary Ploiesti, Romania January 1990 – July 1996 Design Engineer

• Specific project of petrochemicals field (tanks, columns, heat exchangers, piping, metallic structure) for various refineries in Romania: Petrotel-Lukoil Refinery, Vega Refinery, Astra Refinery, Brazi Refinery, etc.

• complete design activity including calculation sheets; technical specifications for materials; parts list; assembly drawings; subassembly drawings; detailed execution drawings; “As Built” documentation; Equipment specification, equipment erection, piping studies, pipe routing, piping GA’s, issued isometrics, supports, material take-off. TMUCB S.A. Bucharest - Subsidiary Ploiesti, Romania September 1985 – January 1990 Mechanical Engineer

• problems solving related to the Mechanical - Energetic Department.

Contact this candidate