Mechanical Engineer Technician

GODWIN ALORRO SOLIS

Barangay **, Porok **, Can Avid Eastern Samar, Philippines

Whatsapp # +63-929******* Email: **********************@*****.*** Mobile # +63-908*******

OBJECTIVE: 1) MECHANICAL TECHNICIAN

PROFILE:

Strong oral & written communication skills and understanding of Mechanical precision instruments . And Electrical motor control Installation.

Knowledgeable of Safety Working Load calculation.

Hands on experience in preventive/corrective and effective repair maintenance and trouble shooting in

Mechanical rotating equipment in order to achieve a safe and efficient maintenance operation.

Practical experience gained through in the Petrochemical and Oil and Gas, Power Plant and refinery

plant (on-shore and Offshore) technical training programmed activities.

Technical competences with-in specific local and foreign mechanical trainings activities such as:

structural welding, EOT crane operations, lathe machine operation, precision shaft alignment.

Ability to carry out duties with a minimum supervision.

Knowledgeable of mechanical P&ID’s and log-out tag- out procedure.

EDUCATION:

COLLEGE: EASTERN VISAYAS STATE UNIVERSITY (Formerly LIT) Tacloban City, Leyte Philippines COURSE: Bachelor of Science in Mechanical Engineering Mechanical Engineer, PRC License # 49330

WORK HISTORY:

September 1, 2021 TO PRESENT TAFT HYDRO ENERGY CORP. Taft Eastern Samar, Philippines

SHIFT MECHANICAL ENGINEER/ Pollution Control Officer

Assist to supervise for the installation of 3 units draft tube, turbine runner and wicket gate, installation of turbine generators,penstock installation.

Assist for reassembly of mechanical seal for cooling system vertical pump, re installation of flange bearing for replacement.

Responsible checking and maintenance for electric overhead crane, hydraulic power unit checking. Assist for Dry and wet testing commissioning of the Power Plant.

Responsible for operating the Hydro Power Plant to present, Resposible for troubleshooting at the turbine pit if necessarily.

January 2016 to July MECHANICAL ENGINEER ( FREELANCER )

Water refilling station installer and maintenance by checking up ultra violet sterilizer, ten up 5 micron of sediments filter, checking up of FRP tank with their sediment replacement, piping installation of water pump and AC motor control installation.

Corrective maintenance of refrigeration air-conditioning unit, survey on structural welding for fabrication for window grill and steel gate for client order.

.Sept. 01, 2015 – Dec. 06, 2015 National Petroleum Construction Company, ABU DHABI, UAE

General Mechanical Technician

Perform on preventive maintenance of 515 BHP Caterpillar engine, cranes, pneumatic pipe davits winches, proper maintenance of tensioner machines and other other pipe handling equipments on the pipe-laying /hook up barges, perform on overhauling hydraulic motor and hydraulic cylinder.

May 7 2014 – Nov 1, 2014 (VAN OORD OFFHORE) BRAZIL

Deck Engineer Project: (Offshore Pipe-laying)

Initiate permit to work (PTW), LOTO. And perform job safety analysis (JSA) for identifying risk, hazards and followed standard maintenance procedure and Perform on isolation point, rectify mechanical problems for the task given. Perform scaffolding erector activities.

Incharged for preventive maintenance of hydraulic equipment such pipe tensioner for the alignment upper lower track, hydraulic motor and cylinder valves, pipe handling, transverse vehicle, line up table, Maintenance for Kobelko and Leibbheirr crane.

coordinate with the tensioner operator before starting laying down the pipe. Monitoring at the stinger line.

June 27 2012 – July 18, 2013 QATAR CHEMICAL COMPANY LTD., State of Qatar

Lead Mechanical Technician Project: (Petrochemical Plant)

Initiate permit to work (PTW), LOTO. And perform job safety analysis (JSA) for identifying risk, hazards and how to mitigate those jobs. followed SMP and Perform on isolation point, rectify mechanical problems and Performed on alignment between stationary and movable equipment by using precision tools such as: straight edge/feeler gauge for checking rough alignment and using dial indicator for checking run out axial /radial float and soft foot for alignment tolerance,using laser alignment for stationary and moveable equipment if necessarily.

Involved during shutdown activities on overhauling of cooper turbo centrifugal compressors with the rated 1800 Hp, perform on preventive maintenance of reciprocating schorch compressors with a model KR 5835B-DA-10 and nitrogen /hydrogen compressors and steam turbines. Involved in blinding and de- blinding of the process line .

conduct proper torque on tightening the flange and bolt by using hydraulic bolt tensioner and other special tools. carry out maintenance task such as mechanical rotating equipment and performed on replacing of mechanical seal, bearing, gasketing if necessarily.

checking radial and axial float clearances base on corrective maintenance checklist .involve on leak testing of valves, pumps by using pressurize air before we installed.

Perform on non -routine activities such as top lube oil of different equipment and replacement of catalyst filter at the pyrophoric tank at hexene.

Assembly of cat feeder valve at the reactor area, Performed work standards to work procedures and practices and obey plant and department rules. Closed the work order and working permit after successful execution.

Sept. 27, 2008 – Oct. 31, 2010 GIS Oilfield & Offshore Contractor, USA

MECHANICAL MAINTENANCE (Project: chevron/shell floating Production )

Performed good jobs the task giving of the company.

Executed works activities are scheduled, coordinated, followed all safety rules and procedure.

Follow the precautions and indications noted on the work permits.

Assist on preventive maintenance of Diesel Power Plant at the platform.

Assist on scaffolding erection activities at the platform

Involved in the field work activities such tool box talk, fire drill.

Adhere to and lead by example to the site safety and environmental procedure, while respecting the social aspect of all workers local and foreign.

Assist on refueling helicopter at the helipad platform.

responsible for computing the load based on the value of common materials for safety working load by using mechanical formulas and procedures for lifting.

Resolved and performed analysis any other mechanical problems.

April 19, 2008 – July 30, 2008 TECHNIP, Norway

MECHANICAL MAINTENANCE (Project: alve,morvin pipe-laying )

Assist on lifting TEE pipes unto the ramp, and assisting on installing anode bounded on the pipe / fabricate bonding strap that use on tightening heating cable isolation.

responsible on maintenance of ROV after diving.

responsible on operating tagger /wenches machines for pulling wire ropes.

Assist on coating, beveling, bonding, and NDT machines, assist on proper housekeeping and cleaning the boat.

Responsible for installing anode for heating surround on the pipes.

Assist on securing mechanical equipment by using strap or chain before we leave.

responsible on monitoring pipes/ direct electric heating cable during loading at the spool-base

responsible on jacking up and jack down the ramp and mooring the vessel.

Responsible on repairing at the ramp by replacing of different type of hydraulic valve

July 11, 2006 – October 18, 2006 AMEC, United Kingdom

MECHANICAL MAINTENANCE ( Project: British Gas Armada hub Platform)

Performed and join the team for tool box talk, to know everyone associated with the job, must understand potential hazards and precautions that are required at the platform

Reporting of any leaking on the pressurize valves, and oil and gas dry tank

Conducted and reported defective equipments used at the platform.

Conducted proper inspections/maintenance of the equipments such as beam clamps, chain block, shackles, impact wrenches, cam-along, hammer wrenches, mechanical rescue kit, and other lifting gear equipments, and safety devices.

Assembly of actuator valves, and piggy pumps that use on pumping oil unto the dry.

PHILIPPINE NATIONAL POLICE November 1998 – June 2006

Police None Commission Officer (PNCO) NCRPO, CALABARZON, MIMAROPA

To enforce the law to prevent and control crimes, maintained peace and order. To ensure the implementation of the PNP through the efficient and effective strategies/ innovation. To prevent and secured metropolitan environment.

February 1996 – May 1998 Daimler Fire Protection, Inc.

PROJECT ENGINEER

Implementation of Fire Protection installation works such piping and fittings.

Responsible for giving a lifting plan operation on the pipe layout for installation.

Responsible for inspection of welding jobs

Responsible for making a new layout of the revise fire protection plan.

TRAINING AND SEMINARS ATTENDED:

BASIC TRAINING FOR POLLUTION CONTROL OFFICER Conducted by: ENVIA Consultancy Inc.,

BASIC OCCUPATIONAL SAFETY AND HEALTH (BOSH) Conducted by: PEME Consultancy Inc.

CONSTRUCTION OCCUPATIONAL SAFETY & HEALTH (COSH) Conducted by:PEME Consultancy Inc.

Basic Offshore Safety Induction & Emergency Training Conducted by: Consolidated Training Center, Philippines

SCAFFOLDING ERECTOR NC2 conducted by: TESDA

EOT CRANE OPERATOR COURSE conducted by: VELOSI, Doha Qatar

Precision Shaft Alignment conducted by: SKF, Dubai UAE.

Lathe Machine operation conducted by: SETAMS Training center, Manila

INSTRUMENTATION (pneumatics) conducted by Meralco Foundation Institute, Manila

Introduction to Hydrogen Sulfide, September 2002 ; First Aid Oil & Gas Drilling RIG Conducted by: Oilwell Drilling Training Center, Philippine

Scuba Diving/Open water Diver (PADI Cert.# 0510A53135 dtd. Sept. 29, 2005)

Structural Welding (SMAW) conducted by TESDA, NCR

CHARACTER REFERENCES:

ENGR. ARNEL ROA DR. FELIX G. NICART

MECHANICAL SHIFT ENGINEER RHU, CAN AVID E. SAMAR TAFT HYDRO ENERGY CORPORATION mobile # 091******** Mobile No. +63-977*******

Contact this candidate