Engineering Manager Project Management

Upstream / Midstream / Downstream Oil & Gas Control Systems Brownfield & Greenfield Development Engineering Project Management SME

A global control system engineer, team leader and engineering project executive with over twenty years of success executing high profile assignments in the US, Gulf of Mexico, South America, Europe and the Middle East (BP, Chevron, Exxon Mobil, Shell, Valero, Petro Bras, Pemex…). Leverages comprehensive expertise across the entire project lifecycle, from design, procurement, programming and testing to implementation, commissioning and maintenance of control and distribution systems.

Expertly managed huge, costly, difficult projects without wasting time, money, effort or energy by leveraging superior collaborative leadership expertise. Seizes opportunities and overcomes challenges by leading and inspiring team members, professionals and key stakeholders, in the development of solutions that perform flawlessly in complex, hostile and dangerous topside and subsea environments.

Siemens, Allen Bradley, Modicon, GE Fanuc, Emerson Delta V, Yokogawa;

Upstream, Midstream, Downstream Design;

Bubble, Ladder Logic, Statement List Programming;

FAT, EFAT, SIT, SAT, Testing, Commissioning PLC/ DCS/ PID tunning;

Conceptual, Pre-FEED, FEED, Detailed Engineering, Commissioning, Aftermarket;

ITT/ RFQs/ RFIs, Tendering, Bid Evaluations, Procurement;

R&D, SIS, OT, IT CPM Interface & Engineering Management;

Basis of Design, Data, Functional Design Specifications

Data Logging, Microwave & IT Offshore Communication;

ProMax, PipeSim, SimApp, InTools, AutoCAD;

Remote Desktop Connection/ Virtual Machine (VM) Automation and Testing.

HIGHLIGHTS

Coberra/ Compressor Unit/ Leak detection/ SCADA/ HMI retrofit for TransCanada Pipeline (TC Energy) while working for Cooper Industries.

RTU/ SCADA/HMI retrofit for GATX Tank Farm in Pasadena, TX.

Complete from scratch - PHA, Cause & Effect reports, P&IDs, and helped in Subsea Architecture and Topside Topology

Committee Member on the API 17O Standard for the first High Integrity Pressure Protection System (HIPPS) in the Gulf of Mexico which required Safety Integrity Level (SIL) in a Safety Instrumented Function (SIF)

Managed a high-impact automation project for one of the world's largest tank terminals, gaining expertise in the efficient implementation of route selection algorithms, adeptly deploying leak detection algorithms, and seamlessly enhancing communication between tank terminal management software and DCS systems

Led a critical midstream pipeline automation project, acquiring expertise in interpreting instrumentation data for leak detection, establishing robust communication networks for RTU, SCADA, DCS, PLC and HMI systems, and implementing real-time transient models within the CPM algorithms to optimize operational efficiency

Successfully managed a high-impact midstream automation project for one of the world's largest tank terminals, acquiring expertise in the efficient implementation of route selection algorithms for transportation and storage, skillfully deploying leak detection algorithms, and seamlessly improving communication between tank terminal management software and DCS systems

Proficiently executed multiple PLC to DCS, PLC to Field HMI/ PLC-DCS to HMI migration projects, utilizing Ladder and Statement List programming

SCORECARD

Skills

Years of Experience

Overall Industry Experience

30+

OT Instrumentation / Automation

25+

PLC / DCS / HMI / CPM Data Flow / SCADA/ RTU

25+

Pipeline Automation

10+

Network Topology Design

10+

SAP Experience

10+

Virtual Machine Design/ Testing

3+

Direct Experience with Emerson Delta V

(Williams Technology, Exxon MEGI & Shell Vito Platform Extension Project)

5+

(2015, 2017 & 2022)

PROFESSIONAL EXPERIENCE

Buckeye Partners, Corpus Christi, TX 2023-Present

Staff Engineer for Refinery

Automation Controls Engineer

Process / Automation Controls Engineer – Responsible for hardware/ software integration development.

Troubleshooting activities and performing routine work efforts to maintain and improve process control utilization and reliability

Providing routine work efforts to maintain and improve unit performance

Designing, reviewing, and modifying regulatory and advanced regulatory control loops and regulatory loop tuning, alarm and point configuration and console operator HMI graphics

Providing project management on new capital automation projects at the basic, advanced regulatory, or APC levels

Providing project support on capital projects with significant automation scope and supporting MOC and/or project manager with process control modifications

Acting as a process control subject matter expert for process hazards analysis, process design modifications, risk assessment review, alarm management, and incident investigations

Designing, monitoring, and maintaining multivariable process controllers in refining process applications

ENTRUST Solutions Group, Houston, TX 2022-2023

An engineering services firm

Principal Controls Engineer

Process / Automation Controls Engineer – Responsible for hardware/ software integration development. Enterprise Products – Projects included: Dew Point Midstream to Shin Oak NGL, Chaparral Reversal Phase I Development; Odfjell Houston Terminals C&E Matrix completion.

Dotson Engineering, Seabrook, TX 2015-2022

An engineering consulting services firm

Subsea Controls Engineering Consultant - SME

Provide engineering design and consulting for onsite evaluations, project management, inspection, maintenance, P&ID level design, supervision of installation and commissioning.

Halliburton Energy Services – Carrollton, TX: Process / Automation Controls Engineer – Responsible for hardware / software code development for Halliburton FloConnect Subsea Testing Equipment; Siemens PLC, OPC Communication including wireless networking, Field Trials, etc.

Valeo – Indianapolis, IN: Process / Automation Controls Engineer – Responsible for Siemens PLC / Fanuc Robotics Site Production;

Yokogawa – Houston, TX: Subject Matter Expert (SME) for Yokogawa’s Product Line in the GoM for Shell;

Total: Inspected, Tested, Mechanically / Electrically Certified Analyzers / Analyzer Buildings for the Total Ethane Cracker Project;

Shell: Supported the Procurement, Assembly, Onshore/Offshore Interface, and Testing/Commissioning of a three level Boarding Shutdown Valve Skid attached to the Shell (SIEP) Vito FPS Offshore Platform in the GOM MCB 939 Field;

ExxonMobil: Onsite Inspection Services Including, Final Mechanical and Electrical Certification Completion documentation for final shipment;

Williams Technology: Supported the Design, Procurement and Assembly / Programming, Testing and Commissioning of a Remote Platform off the coast of Morgan City, TX;

Chrysler - Toledo, OH: Controls Engineer for Plant Floor on the Retrofit Jeep Wrangler 2018 Production Line – Responsible for the Siemens and Allen Bradly PLCs maintain the current production line and during the retrofit of new technology;

Sasol: LNG FAT, SIT & Commissioning of Mechanical and Electrical Certification for Hydrogen Liquefaction, Gasification & Distillation Plants.

BP: Entrusted with all instruments, electrical and control onsite expertise for fourteen individual skids (methanol, injection, HPU, etc.), once tested, commissioned and signed off, were shipped to Tahiti for integration onto a three-level offshore platform. Completed and witness tested all fourteen skids for shipment; started project behind schedule but, once on board completed tasks set forth by Chevron in a timely manner and saved Chevron immeasurable time and money; Nine skids were located within a 50mile radius of Houston, TX with five skids located in the state of Louisiana. Completed all Mechanical and Electrical Certification Completion documentation for final SIT;

WJM, Inc., Houston, TX 2017-2019

William Jacob Management is a leading consultancy and engineering company that plans, develops, and executes large, technically-complex onshore and offshore projects.

Senior Subsea Control Systems Engineer – SME

Provided Project Management and forensic engineering studies for topside/subsea onshore/offshore oil & gas production control systems. All subsea instrumentation, electrical and controls inspection and studies.

Doris, Inc., Houston, TX 2014-2015

Oil and gas facilities engineering and capital project management Services Company.

Lead Subsea Control Systems Engineer – SME

Accountable for the management of Conceptual, Pre-FEED and FEED field development studies to detailed engineering design, including manpower studies and onsite supervision of installation and commissioning. Provided deepwater engineering support for various clients.

Served as Lead Subsea Controls Engineer for Chevron Malange FEED Study. Led a team of ten engineers with a field development investment of $350 million on a twelve-month FEED study. Duties included:

Preparation of the Basis of Design Documentation

Preparation of preliminary topside/subsea equipment functional specifications.

Preparation of technical notes reports and decision papers

Ensuring compliance with project philosophies and operability requirements

Development of testing, commissioning, and installation strategies.

Interfacing with client engineering team.

Assist in reliability assessments

Provided support to the preparation of ITT documentation.

Provided support for RFQs, RFIs & evaluation of future supply chain procurement.

Managed PCB vendor on behalf of client during procurement, manufacture, and testing phases.

OneSubsea, Inc., Houston, TX 2013-2014

A subsidiary of Cameron/Schlumberger, delivering integrated solutions, products, systems, and services for the subsea oil and gas market.

Lead Subsea Control Systems Engineer

Provides package lead support and oversight for the PEMEX Lakach ITT Smart Well Completion rebid and welding frame agreement support for Exxon Mobil. As Control / Umbilical systems advisor for Stone Energy, completed study of two umbilical eight-well tiebacks to existing BP Pompano platform.

Granherne, Inc., Houston, TX 2006-2013

A leading consultancy and engineering company that plans, develops, and executes large, technically-complex onshore and offshore projects.

Senior Subsea, Topside & umbilical Control Systems Engineering Consultant - SME

Provided Conceptual, Pre-FEED, FEED, field, reliability and area Development Studies, Detailed Engineering Design to onsite Supervision for Testing, Installation / Commissioning of Subsea Production Control Systems for Onshore / Offshore Deepwater oil and gas projects. Served as subject matter expert on topside/subsea onshore/offshore production control system development and subsea processing. Member of the API 17O committee supporting High-Integrity Pressure Protection System (HIPPS).

Individually completed two $20M projects consisting of the engineering design, procurement and installation/commissioning and delivery of a subsea isolation valve on the pontoon of the Chevron Bigfoot and St. Malo platforms before load out from the shipyard. Both projects were led by three individuals with expertise in their required field. I was the Lead Control Systems Engineer. The isolation valve was an over site by the engineering staff at Chevron and required trips to the UK and abroad to maintain progress and a no skip tolerance schedule goal for load out on both platforms.

Managed $110M, three-year drill floor automation project for Hitec Industries covering driller chair and tool pushers chair plus the simulation software and hardware for offshore crew men to practice on video, saving time and money and improving safety.

Managed 58-well concept select study for Exxon/Mobil Equatorial Guinea Inc. (MEGI) as Subsea Control/Umbilical Systems Technical Advisor.

As Lead Control/Umbilical systems advisor for BP Kaskida FPSO Global Project with global company-level approach to Subsea architecture, procurement, implementation, and commissioning.

Managed a FEED study completed in six months for the Chevron Lianzi Project, led a team of eight engineers with a field development investment of $750 million which included a DEH umbilical portion starting in a Pre-FEED status and later brought to FEED status at project completion.

As control/umbilical systems advisor for Chevron Jack St. Malo Project, managed detailed engineering-to-RFQ of Subsea safety isolation valve systems for umbilical and flowline interfaces.

As Umbilical Systems Advisor for two well tiebacks to GC-52 platform, managing detailed engineering to RFQ of umbilical / Subsea equipment.

Control systems advisor for MMS HIPPS Studies with API 17O field architecture designs, reliability study, SIL certification and maintenance program for the Marathon Ozona Pre-FEED and FEED studies.

Completed Pre-FEED and FEED study for the Marathon Ozona to lead the introduction of HIPPS system to the Gulf of Mexico, collaborating with departmental heads, R&D personnel and engineers from Cameron, FMC, and Aker Kvaerner.

Managed Marathon Ozona feasibility pre-FEED and FEED study as advisor for 15,000 psi tieback, collaborating closely with departmental heads, R&D personnel and engineers within Cameron, FMC and Aker Kvaerner.

Performed Hess Australia WA-390-P concept select studies covering conceptual engineering for multiple gas fields on the WA block, evaluating field architecture, topsides, hulls, moorings/foundations, and export options.

Developed flexible field architectures using standardized building blocks as lead control/umbilical systems advisor for Chevron Lianzi FEED, evaluating in-depth schedules and delivery drivers for Subsea equipment leading a team of 16 Engineers.

As control systems advisor for $90,000 Angola LNG contract, designed and engineered the controls and interfaces for onshore isolation valves including detailed pig launcher/catcher procedure and control telemetry.

Dotson Engineering, Seabrook, TX 1998-2006

Senior E, I & Control Technical Advisor

Notable representative engagements:

Completed seven simultaneous $4 million BPO projects for CEO Graham Reynolds at Hydril Inc.

Managed $120M, three-year drill floor automation projects for Hitec Drilling & Marine covering driller chair and tool pushers chair plus the simulation software and hardware for offshore crew men to practice on video, saving time and money and improving safety.

Saved Cameron $100 million by completing investigation and bench study, discovering that metal seats of the valve were not properly set before being deployed causing subsea controls module manifold valves to leak fluid at over 5,000 feet depth.

In $432 million project, completed R&D study on the best way to repair a leak in twenty-three cluster wells at the crossover valve without retrieval of each well with a possible mob/de-mob in excess of $1 million per well. Role was Control Systems Staff Engineer for Cameron.

Led Subsea Control Systems Technical Advisor for Cameron, supervised onshore/offshore design and execution of projects for ExxonMobil Kizomba A, B, C, Erha, Shell Malampaya, Husky White Rose, OMV Sole, Patricia Bleen, ChevronTexaco Agbami and Tahiti.

As Engineering Consultant for FMC Technologies subsea production control systems covering ExxonMobil (MEGI) Zafiro, Ekanga Notch, and Zafiro Southern Expansion Area (SEA); Shell Nakika, Princess and Serrano Oregano.

As Lead Subsea Control Systems Engineer for Kvaerner Oilfield Products, managed aftermarket maintenance program for Canyon Express, ExxonMobil Erha, Penn-State Extension, Bluewater Ladybug and Garden Banks 201.

As Hitec Drilling & Marine Drill Floor Automation Systems Engineer, managed supervision and design of an eight-member team for Diamond offshore fleet, Chile’s offshore fleet, Transocean Horizon, Millennium and Pathfinder.

As Systems Automation Engineer for National Oilwell drill floor, supervised, designed and integrated engineering projects focused on programming and promoting the company’s Drawworks, Pipe Racker, Rough Neck, Top Drive and Mud Pump systems for R&B Falcon, Hibernia Development Project (Canada), Rowan Gorilla 5, 6 and 7.

As BOP Subsea Systems Engineer for Hydril Technologies on Sub-Sea MUX BOP control systems for Transocean Marianas, Sedco 707, Sedco Forex and Discoverer Seven Seas. Responsible for the control systems knowledge base between projects to confirm lessons learned are carried over to the next system completion before delivery.

Led simultaneous projects with total value of $350M, commissioning and certifying four Woodgroup downhole Pressure/Temperature DHPT gauges at W-Industries (Raouf Hadad) to interface with the FMC Subsea Control Module card rack prior to shipment of the project.

Whessoe Coggins, Inc., Houston, TX 1996-1998

Controls Engineer

Individually led and directed multiple vendors, plant personal and management team to implement an effective preventive maintenance program.

Managed $90M engineering project for the GATX tank farm retrofit for a copper-based control system replacing two-line copper system with five miles of fiber, two hot swappable Allen Bradley PLC 5 series PLCs and over five thousand remote I/Os. Role: Systems Engineer.

Cooper Industries, Inc., Mt Vernon, OH – Houston, TX 1990-1996

Field Controls Engineer

Individually supported Nationally/Internally programmed/maintained industrial Rolls-Royce rotating Coberra Units and Cooper-Bessmer reciprocating PLC based systems. I also coordinated activities for testing/programming control logic for Nuclear Plant LSV stand-by diesels in the U.S.

Installed, tested and commissioned eight RB211 Coberra Compressor Stations for the Trans Canada Pipeline in Canada and the U.S.

Installed, tested and commissioned two RB211 Coberra Compressor Units & four Avon power Units on eleven stations from the Persian Gulf to the Red Sea for Aramco, Saudi Arabia.

Supported the turnaround control maintenance for the Byron Nuclear Generating Station outside of Rockford, IL.

Two-year member of the R&D Lab for Cooper-Bessmer reciprocating R&D Lab.

Commissioned two RB211Coberra Compressor Units per station from the Persian Gulf to the Red Sea for Aramco in Saudi Arabia.

Discovered a multimillion-dollar shutdown problem at the Global Octane Plant in Pasadena, TX.

Education

Texas A&M University, College Station, TX;

Bachelors of Science degree in Electrical Engineering Technology

Texas State Technical Institute, Waco, TX;

Associates of Applied Science degree in Electrical Power Technology

Technical Skills:

Designing automation and electrical systems

DCSs, PLCs and HMIs (touch-panel and PC-based) programming

(Emerson DeltaV, Yokogawa Siemens S7, Allen Bradley Rockwell ControlLogix, Productivity, DirectSoft PLCs).

SIS – API-17O committee member in the design of the first HIPPS in the GoM.

Batch processes (ISA S88) design and programming.

Designing communication network between PLCs and devices protocols (Modbus, Ethernet, Profibus, OPC)

Siemens VFDs design & commissioning

E/ I Functional Design Specification (FDS), interfaces and field calibration.

Pipeline LNG, Crude Oil Station design and implementation (Reciprocal / Rotating).

Creating and maintained Field Redlines, P&IDs, C&E and Alarm documents.

Troubleshooting facilities and equipment, applying comprehensive technical knowledge and hands-on experience in solving problems and achieve results.

Planning, organizing and prioritizing complex and multiple electrical job requirements.

Education:

Bachelor of Electrical Engineering Technology, Texas A&M University, College Station, TX.

Associates of Applied Science in Electrical Power Technology from Texas State Technical Institute (TSTI), Waco, TX.

Skills:

SME on Siemens Step7 & Allen Bradley Studio 5000 Logix

Certified Emerson DeltaV Implementation I - Course 7009

Round Rock, TX

TWICs Card (Expires 2028)

HASC ID# 192******* Training

-Reciprocal

-General Safety

-Houston Terminal Training: (NOV2023)

ENPBMT, ENPHSC, ENTGEN, ITCBZ, ITCP, ODFJEL, OTTC

Contact this candidate