Hse Engineer Safety

Mohammed Ali Husain

Address - A/P Lipniwave, Taluka Mhasla, Dist Raigad, State Maharashtra, PIN- 402101 ***********.***@*****.*** +919*********

Professional Objective

To achieve a challenging position & assignments in the field of Oil & Gas / Petrochemical Complex and Construction where I can best utilize my technical, HSE and management skills.

Work Experience

1. Lead HSE Engineer Mar 2019 - Present

Kuwait Integrated Petroleum Industries Company (KIPIC), Al-Zour Refinery

Lead (manage and coordinate) all Safety concerns with Operations and Project team members in ensuring that the project is in compliance with the HSE requirements i.e. specifications, safety codes, procedures and other policies / guidelines and achieve safe project completion.

Liaise with Operations teams, Projects teams, Contractors and all stakeholders to promote site Safety Culture.

Participate in Major Incident Investigation & Reporting. Coordinate verification audits to ensure implementation of KPC recommendations pertaining to respective incident and tracking of recommendations closure.

Coordinate Theme Audits, Work Permit Audits, Site HSE Performance Audits, Site Inspections at Process areas, Tank Farms, Marine Terminals, KIPIC H.O., Commercial and all other office Buildings.

Contractor's HSE Performance Evaluation as per KPI's & other several requirements of HSSE Guidelines for Contractors.

Oversee and guide Projects teams and Operations teams to conduct Risk Assessments for critical works, implement and comply with the Company and statutory HSE regulations.

Conduct Safety Awareness and Authorization trainings, Promotional Programs and Campaigns.

Demonstrated expertise in strong leadership, communication and creative problem solving.

Consistent ability to oversee HSE activities in critical/ high risk areas.

Comprehensive knowledge of HSE regulations, Standards and best practices.

Development & revision of Safe Work Practices, HSE Procedures, Plans and their Roll Out as per new guidelines issued under HSSE Management System.

Review of Safe Work Practices, HSE Procedures, Plans and other relevant documents.

Participate in Mechanical Completion (MC) / PSSR Walk Downs.

Conduct EPC Contractor Safety Staff Interview and Approval.

Witness & cross check Gas Test for Confined space First Entry, moreover gas tests during emergency.

Field Inspection & issuance of Safety Certificate for Engine Driven Equipment.

Promote & advise O&M and KIPIC employees on Safety aspects through Meetings, Workshops, Trainings & Campaigns.

Conduct Site Specific Safety Trainings.

Conduct HSSE Induction/Orientation for new employees and Contractor key personnel.

Participate in Emergency Response & Evacuation Drills at Process areas, Tank Farms, Marine Terminals, KIPIC H.O., Commercial Building, and all other Buildings.

Participate in QPR, MMM, GWM Meetings with Top Management to resolve issues and report achievements.

Coordination for the development of various Safety related IT systems.

System Admin for HSE Improvement Forms for Head Office, Commercial and ZOR Office Buildings.

Provide support in achieving Safety KPI's of Non- Operational Group such as Finance, HR etc.

2. Lead HSE Engineer Apr 2016 - Feb 2019

Tecnicas Reunidas, SA

CLIENT: Kuwait National Petroleum Company (KNPC)

PMC: Amec Foster Wheeler.

Project: EPC & C of Gas Train-5 Project

Handled projects under major client like KNPC.

Ensures compliance to PTW system & WPRA by conducting frequent audits.

Conduct mock drill to evaluate readiness of ERP and correct deficiencies.

Coordinate with Client and Subcontractors for various safety issues.

Identifying safety training needs, organize and coordinate safety training courses and training material as and when necessary.

Review and update emergency procedures as and when necessary.

Daily site visit and advise personnel to adhere with the site safety requirements.

Carry out weekly site safety assessment with management. Review rigging studies and heavy lift plans.

Safety inspection of lifting tools and tackles such as slings, web slings and shackles in accordance with TPC.

Training all personnel on usage of fire extinguishers and applicable safety precautions and procedures in line with existing Company procedures.

Identification of hazards and preventing accidents. Controlling the work place hazards by implementing SHAC pertaining details of existing hazards.

Responsible for the development and effective implementation of HSE plan and HSE Management System.

Participate in pre job safety meeting with Subcontractors and explain HSE requirement and waste management.

Assist Execution Teams to prepare WPRA.

Develop and deliver comprehensive support to project team and advice on all aspects of HSE issues, SWPs and WPRAs.

Undertake systemic inspections/audits to determine health and safety needs, producing reports on the findings.

Monitor and review HSE policies and practices so as to ensure compliance with Company & statutory requirements.

Provide guidance and support to other members of the team and assist in their professional development in HSE field.

Provide leadership, advice and guidance to HSE team with a focus on sustainably minimizing operational risk and achieving best practices.

Act as a focal point to client and owner for the HSE activities in the project.

Monitoring and assessing the welfare facilities for workers as per requirement.

Lead various safety campaign on a monthly basis and conduct mass toolbox meetings.

Investigate violations to ensure safety procedures are being followed and council managers and employees accordingly.

Liaise with client in all HSE activities.

Plan, coordinate and supervise the day to day activities of Safety Supervisors.

Inspect the project site, work locations on daily basis for identifying hazards, unsafe practices or conditions, and advice Subcontractor accordingly to take appropriate remedial action of the observed hazards and non conformance and monitor rectifications.

Plan, conduct and address safety concerns in Safety Meetings. 3. Lead Safety Engineer June 2014 - Apr 2016

Daelim Industrial Co.

CLIENT: Kuwait National Petroleum Company

PMC: Amec Foster Wheeler.

Project: FCC, SWT, & CT for CFP at MAA Refinery.

Pursue and advice on HSE issues associated with standards and practices.

Review daily work reports & recommendations made by subordinates, discuss same in daily meetings & with teams involved prior to implementation.

Review lifting plan /rigging plan for critical rigging activity.

Frequently conducting internal Safety Audits and taking corrective & Preventive measures to eliminate the system non-compliance.

Hazard analysis & Risk assessment of site activities and plan corrective & preventative actions.

Participate in pre-commissioning activities like function test, Solo run, MRT, LOTO, hydro test, gravity leak test, air blowing, water flushing, steam blowing etc.

Prepare an evacuation safety plan for field areas and buildings, examine or supervise the plan on implementation stage. Inspect permit to work on sites & suspend work when identifying imminent danger.

Making all employees aware of Accident/Incident Reporting, Emergency Response, Assembly points, Emergency Sirens and Mock Drills and evaluate its effectiveness.

Maintaining 100% tie off by using full body harness with double lanyard for elevated work.

Conduct Work Permit Compliance Audit. Monitor and ensure implementation of Occupational Health, Safety & Environmental requirements as per HSE plan.

Develop & carry out safety training / orientation and awareness programs.

Investigate & report accidents, near misses, substandard acts & substandard conditions and recommend preventive and corrective actions.

Ensure compliance to KNPC safe work practices in critical activities like working at height, critical lifting operations & confined space work.

Ensure monthly inspection of equipment like cranes, hand tools, electrical tools, slings, shackles, vehicles, fire extinguisher & remove damaged equipment from the site by discipline Supervisors.

Schedule regular site inspection by Safety Supervisors to find out unsafe act and conditions.

Conduct and participate in Weekly/Monthly HSE Meetings at contractor level as well as with client and prepare MOM for the same. Participate in client monthly and quarterly HSE performance review meetings.

Prepare & update HSE statistics.

Prepare and update HSE Plan in consultation with team members.

Prepare employees HSE handbook/manual.

Motivating employees to report incident and implementation of no blame culture.

Ensure implementation and practice of PPE program and use of Safety Signage at work place. Supervise housekeeping, health, hygiene and environment related activities. Ensure Fire Fighting equipment are in place at fire-prone areas and bear essential safety & its prompt usage.

Maintain all required records and keep update HSE documentation. 4. Safety Engineer (Approved by KNPC) Mar 2013 - June 2014 IMCO Engineering & Construction Co., Kuwait

CLIENT: Kuwait National Petroleum Company (KNPC)

Projects:

1. Replacement of Old and Inadequate Flood Light Towers at Tankage and Offsite areas of Old Refinery - MAA.

2. Replacement of Flow Computers at New Oil Pier (Offshore) in KNPC MAA Refinery.

Carries out safety training and promotional programs and take required action for implementation of such programs include giving lectures with illustrations arranging distribution of posters and training on the use of breathing apparatus, electrical safety, elevated work safety, material handling and confined space entry.

Carry out risk assessment for all hazardous operations at work sites and plan corrective & preventative action.

Investigate & report accidents, near misses, substandard acts & substandard conditions and recommend corrective actions.

Maintaining 100% tie off by using full body harness with double lanyard for elevated work.

Prepare and update HSE Plan in consultation with team members.

Responsible to make regular site inspection to find out unsafe act and conditions.

Conduct daily/weekly/monthly equipment inspections like welding machines, mobile equipment, tools, fire extinguishers, slings, shackles etc.

Inspect permit to work on sites and suspend work when identifying imminent danger.

Participate in Safety Audits.

Prepare an emergency response plan, examine or supervise the plan on implementation stage.

Conduct HSE meetings and other safety awareness programs.

Ensure compliance to safety standards and procedures. 5. Safety Engineer Oct 2012 - Mar 2013

Wael Al-Nusif Trading & Co., Kuwait

CLIENT: Kuwait National Petroleum Company

Project: Operation Services for Petrol Filling Stations, Local Marketing, Subhan.

Keep abreast of latest developments in the field of safety and participate in Health, Safety & Environment meetings and other safety awareness program.

Prepare and update HSE Plan in consultation with team members.

Prepare employees HSE handbook/ manual

Develop & carry out safety training / orientation and awareness programs.

Conduct Safety Audits on fuel filling stations.

Conduct safety inspections at assigned company operational areas.

Prepare reports such as near miss, incident/accident and participate in root cause investigation.

Motivating employees to report incident and implementation of no blame culture.

Maintaining a ready supply of PPE & enforce strict compliance to PPE program. 6. Safety Engineer Dec 2010 - Sep 2012

HUSSEIN M.Y. BEHBEHANI Co., Kuwait

CLIENT: Technip

Project: Khafji Crude Related Offshore Projects

Maintaining a surveillance program to check safe working practices, hazardous site conditions.

Prepare an evacuation safety plan for field areas and buildings, examine or supervise the plan on implementation stage. Inspect permit to work on sites & suspend work when identifying imminent danger.

Develop & carry out safety training / orientation and awareness programs.

Prepare JSA, risk assessment and HSE reports.

Monthly inspection of equipment like cranes, hand tools, electrical tools, slings, shackles, vehicles, fire extinguisher & remove damaged equipment from the site.

Conduct Safety Audits.

Responsible to make regular site inspection to find out unsafe act and conditions.

Prepare reports such as near miss, incident/accident and participate in root cause investigation.

Maintaining a ready supply of PPE & enforce strict compliance to PPE program.

Confined space work safety.

Coordinate with subcontractor's safety department. 7. Safety Engineer Nov 2004 - June 2010

Mohammad Al-Mojil Group, Saudi Arabia

Projects:

1. Connecting additional silos to bulk loading at PP Plant Sabic - IbnZahr

(from November 2004 to May 2006)

2. Shrink Oven Replacement at PP Plant Sabic – Sharq

(from June 2006 to August 2007)

3. Replacement of existing pipeline at Saudi Aramco

(from September 2007 to June 2010)

Handled projects under major clients like ARAMCO and SABIC.

Prepare & update safety statistics.

Prepare JSA, risk assessment and HSE reports.

Implement and ensure compliance to safety standards and other safety related rules and regulations. Develop & carry out safety training and awareness programs.

Provide orientation to the employees.

Conduct HSE meetings and training programs.

Confined space work safety.

Participate in Safety Audits.

Conduct daily/weekly/monthly equipment inspections like welding machines, mobile equipment, tools, fire extinguishers, slings, shackles etc.

Investigate & report accidents, near misses and recommend corrective actions. Participate in root cause investigation.

Supervise housekeeping, health, hygiene and environment related activities.

Assist Safety Manager in co-ordination of safety activities.

Responsible to make regular site inspection to find out unsafe act and conditions.

Inspect permit to work on sites and suspend work when identifying imminent danger.

Maintaining a ready supply of PPE & enforce strict compliance to PPE program. 8. Safety Officer May 2003 - Aug 2004

Indian Oxalate Ltd., India

The plant manufactures Diethyl Oxalate (DEO) by esterification of Ethanol with Oxalic Acid in presence of Benzene.

Conduct safety toolbox talk/safety meetings.

Conduct safety inspections at company operational areas.

Maintaining a ready supply of protective clothing and safety equipment and issuing PPE as required. Ensure strict compliance to PPE program.

Conduct daily/weekly/monthly equipment inspections like welding machines, mobile equipment, tools, fire extinguishers, slings, shackles, respirators etc.

Confined space work safety.

Supervise housekeeping, health, hygiene and environment related activities.

Regular check over of fire & safety equipment for plant safety.

Provide safety training/orientation to the employee.

Assist Plant Manager in co-ordination of safety activities. 9. Production Engineer Oct 2001 - Apr 2003

S. R. Chemicals Pvt. Ltd., India

Basically the plant manufactures Oxalic Acid from Nitric Acid and Sugar in presence of Vanadium Pentoxide as a catalyst & H2So4 as a mediator.

Ensure safe, smooth and uninterrupted operation of plant.

Monitor plant performance against approved targets on a day to day basis.

Controlling and maintaining process parameters as per technical region.

Reporting equipment and instrument defects and making further possible corrective measures.

Carry out troubleshooting in the plant.

Planning and execution of routine and corrective maintenance activities.

Ensure all production related data is accurately recorded in the appropriate system in timely manner and manage all appropriate administrative duties to fulfill the requirements of the production department.

Ensure availability of optimal operational spares in inventory.

Assist to conserve fuel or energy.

Preparation of daily and monthly production reports.

Implementation of Production Schedule for achieving production target.

Manage start-up and shutdown operation of the entire plant and emergency action on power failure.

Deal with all process safety requirements and environmental issues. EDUCATION

B.E. Chemical Apr 2001

Shivaji University, Kolhapur Maharashtra, India, Kolhapur Diploma in Petrochemical Engineering Jun 1998

Dr. B. A. Technological University, Lonere, Maharashtra, India Diploma in Industrial Safety & Fire Engineering May 1995 Institute of Advanced Technology, Fire & Safety, Nashik IGC in Occupational Health & Safety - Health and safety Aug 2021 Nebosh

SKILLS

Expert in:

Leadership & communication

Health, Safety & Environment Management

Construction Safety Management

Risk Assessment

Workplace Hazard Management

Audits & Inspections

HSE Trainings

Active reactive monitoring

Regulatory Compliance

HSE documentation

HONORS & AWARDS

Best Nearmiss - 2015

Kuwait National Petroleum Company

PERSONAL INFORMATION

Gender: Male

Nationality: Indian

Date of Birth: 01/06/1977

Marital Status: Married

Languages Known: English, Urdu, Hindi & Marathi

Passport Number: Z5642129

Date of Issue: 14/10/2021

Date of Expiry: 13/10/2031

Contact this candidate