Electrical Engineer Maintenance Supervisor

CARLITO BUAN CENA

Position apply: Engineer-Electrical

Contact no: +974-******** /+974-********/+639**-*******

Alangilan, Batangas City, PHILIPPINES

Email add. ***********@*****.***

Objective:

To be a part of a dynamic and vibrant company which requires competent and adept organizational skills where I can efficiently employ my technical abilities, enhance my interest and improve myself, and simultaneously be valuable asset in the accomplishment goals and aims.

Personal Background:

Place of Birth : Alangilan, Batangas City, Philippines

Date of Birth : November 4, 1969

Age : 48

Nationality : Filipino

Qatar Driver License : 269********

Validity Date : 2022-03-05

Current Location : Qatar

Educational Background:

Degree Course: Bachelor of Science in Industrial Technology

Major: Electrical Technology

Batangas State University (BSU)

Technical Course: Diploma of Industrial Technology

Major: Electrical Technology

Batangas State University

Certificate of Training:

PERFORMING AUTHORITY

QATAR PETROLEUM

DATE : April 26, 2017

: H2S/BA TRAINING CERTIFICATE

QATAR PETROLEUM

DATE : May 31, 2017

BASIC OVERHEAD CRANE OPERATOR SAFETY

GL- GERMANISCHER LLOYD

DATE : February 21, 22 & 23 2017

TEAM BUILDING DYNAMICS WORKSHOP

CELLS MANAGEMENT AND CONSULTANCY PTE LTD

NAKILAT-KEPPEL OFFSHORE & MARINE-NKOM

DATE : February 7, 2012

PMS OPERATOR & MAINTENANCE TRAINING

ABB OY, SUBSTATION AUTOMATION SYSTEMS

NAKILAT-KEPPEL OFFSHORE & MARINE-NKOM

DATE : 13 & 14 December 2011

BASIC PROGRAMMALE LOGIC CONTROLLER (PLC) TRAINING

STEEL CORPORATION OF THE PHILIPPINES

DATE : 14 & 15 March 2000

Professionals Experiences:

Organization: Qatar Navigation-Milaha

Position: Foreman- Maintenance & Facilities

Organization : SPIE Oil & Gas Services Middle East L.L.C

Position : PROJECT SITE ELECTRICAL SUPERVISOR - FACILITIES & UTILITIES

Project Involve : QP-RLIC Facilities and Utilities, Qatar Petroleum

Common Seawater Facilities-CSF, Qatar Petroleum

NAKILAT DAMEN SHIPYARD QATAR- NDSQ,

NAKILAT-KEPPEL OFFSHORE & MARINE-NKOM

Duration : From October 1, 2016 to Present

Responsibilities:

Hands-on switching operation the HV, LV & MV Switchgear.

Hands-on testing the CT and VT protection relay IR Test & Contact resistance Measurements.

Hands-on operation and maintenance the UPS- Battery Charger – TYPE: CHLORIDE Industrial System and AEG Protect RCS-TPRe.

Provide and create works orders for preventive and corrective maintenance from maintenance work flow system (SAP) and update the improvement of company properties and asset to ensure all are met in specific date and time.

Attend weekly and daily meeting with client.

Ensure the team is carryout the works according to the plan, policy and procedure.

Responsible for implementation of daily preventive and corrective maintenance task as per client standard and procedure which regards safety compliance.

Attend on-calls duty on emergency task if require immediate response.

Plan and control the electrical maintenance team to facilitate the safe and efficient operation to meet the company maintenance and strategy policy.

Lead the activities on workshop on daily basis to ensure correct safety procedure was followed and coordinated with other responsible team.

Provide technical and assistance support on construction team and other departments.

Conduct daily toolbox meeting to ensure all are well manage and aware for all company safety standard.

Apply PTW for different electrical task and follow the standard procedure written in approved Job Safety Analysis & Method of Statement.

Organizing the work load and priorities of electrical technician.

Hand-on maintenance and fault finding for Electrical Controls Panel, Distribution Board, and associates equipment.

Equipment testing and inspection (SAT) as part of equipment acceptance procedure.

Identify trouble, problem issues and make corrective measures to fix problem in electrical & mechanical components, Electrical Motor, Electrical Lighting, Socket wiring installations in Building and House wiring, HVAC System, Minor Water Pipe Line and CCTV-Close Circuit Television.

Testing of HV, MV switchboards including apparatus i.e circuits breakers, disconnecting switches, earth switches and including testing of LV switchboards, loop test to control and supervise the computerized system and fault recorder.

Understanding the testing and commissioning requirements for cable earth, grounding, generators, Automatic Transfer Switch (ATS), lighting and lighting controls, over current protection and related electrical system.

Organization : NAKILAT-KEPPEL OFFSHORE & MARINE Ltd.

Position : ENGINEER –Maintenance

Facilities & Maintenance Department

Southern Breakwater, Ras, Laffan Industrial City

Doha, State of Qatar

Duration : June 01, 2011– February 9, 2016

Responsibilities:

Responsible for planning and maintaining work system, procedures, and policies that enable and encourage the optimum performance of the people for offshore and onshore activities.

Provide a safe, successful, timely and economical electrical maintenance & repair service for all onboard electrical equipment within the area of responsibility.

Hand-on switching operation the HV, LV & MV Switchgear and preventive maintenance of transformer 11/.433KV for under-ground and above ground Sub Station which is required on preventive maintenance activities and ensure the safety standard.

Responsible the operation of Sub-Station Power House 60 Hz, Gangway Tower & Dehumidifier Machine-DH to support and to continue the smooth operation of the project.

Ensuring that worker follow standard safety precautions while undertaking installation and maintenance works.

Ensure safety of all employees and contractors working in operating unit or department to continuous improvement towards a true safety culture. This includes supporting all corporate safety programs; developing SOP’s, identifying and eliminating hazards and enforcing all safety rules.

Ensure compliance with all standards and program (safety, environmental, quality, maintenance and procedure) with in the area of responsibility.

Perform and conduct tool box talk or meeting prior start the job to secure the safety measure are implemented and job safety analysis well clear and as per safety procedures.

Verify the work assigned, proper work methods or method of statement- MS, techniques and compliance with applicable standard and specifications to ensure adherence to established guidelines, rules and regulation.

Maintain efficient records on operation and activities (logbook) and coordinate and prepare a variety of reports.

Attend to urgent operational equipment failure and reports and include recommendation to prevent such failures re-occurring.

Response in emergency call-out on night, weekends and holidays.

Ability to:

To execute, operate and switching the High Voltage, Low Voltage (HV/LV) switchgear from main power source, ATS-Auto Transfer Switch, distribution board, controls and panel from the different Ring Circuits use in entire NKOM & NDSQ shipyard.

To operate and trouble shoot the Dehumidifier and Gangway Tower located in entire shipyard.

To use any type of electrical power tools, hand tools and measuring equipment such as Multi-meter, Megger, Contact resistance Meter, Clamp Meter, Hi-Pot- Hi-Potential measurement equipment, Trip test Equipment- OMICRON 356 and Earth Tester- KEW 4106.

Troubleshoot and diagnose problem.

Read and interpret technical illustration, HV & LV schematic, single Line Diagram and associate electrical controls on each ring circuit located in entire yard.

Operate office equipment including computers and supporting software application.

Independently perform difficult installations, repair, troubleshooting and maintenance of electrical equipment.

Work under steady pressure with frequent interruption.

Communicate clearly and precisely both oral and written.

Organization : DAEWOO E & C (ENGINEERING & CONSTRUCTIONS)

Position : ELECTRICAL SUPERVISOR- CONSTRUCTION

Award : GOLD AWARD-OUTSTANDING EMPLOYEE OF THE MONTH of JANUARY 2011

Duration : December 2007- March 2011

Project Involve:

NAKILAT-KEPPEL OFFSHORE & MARINE

Southern Breakwater, Ras Laffan Industrial City

Doha, State of Qatar

July 2010 – March 05, 2011

QATAR CHEMICAL COMPANY-Q-CHEM

Messaeid, Industrial City

Doha, State of Qatar

December 2007 - March, 2010

Responsibilities:

Responsible for planning of daily task on job sites given by constructions engineers and ensuring daily activities are met and projects is completed ahead on given schedule.

Installation the different electrical equipment, HV-LV Panel, Transformer, UPS, Battery Charger, Field Pumps & Motor, Field operating Panel, street lightings, Switchgear lightings Sockets & switches.

Implements the testing, commissioning program in electrical discipline and associates work scope and coordinate, assist during pre-commissioning and commissioning activities.

Understanding the testing and commissioning requirements for cable earth, grounding, generators, Automatic Transfer Switch (ATS), lighting and lighting controls, UPS and battery charging system, over current protection and related electrical system.

Perform primary and secondary testing of instrument transformers (current and voltage transformers), polarity and rotation.

Testing of HV, MV switchboards including apparatus i.e circuits breakers, disconnecting switches, earth switches and including testing of LV switchboards, loop test to control and supervise the computerized system and fault recorder.

Perform scheme test or functional tests, testing of inter-trip panel and tripping matrix and monitor the electrical interlocking schemes.

Ensure the commissioning obligations of the project are carried out in accordance with the terms of contract, quality and schedule in conformance with good practice of commissioning standards.

Defining and requesting work or test permit, release service operation and to follow-up of clearance works and responsibility in handling over commissioned system to the operation team.

Utilize and manage the documentation for electrical commissioning such as taking over certificates, as built drawing, manufactures manuals and instruction, test procedure, risk assessment, health and safety method of statement and end of commissioning reports.

Monitor and direct supervision the technician on project site.

Ensure all quality controls records like test reports, equipment calibration certificate, designed modification request.

Compile, consolidate and follow-up the end of electrical commissioning reports and preparing the taking over of system or sub-system for operational team.

Review construction method statement, pre-commissioning procedure and endorse red marks drawing and dossiers.

Control and endorse work permit for the project work and ensure that QPs safety standards safety regulation, project safety plan was understood and followed by contractors.

Inspect construction works and materials in accordance with the project Quality Plan and inspection Test Plans.

Attend weekly progress meeting, update the daily and weekly construction progress reports and verify contractor progress for accuracy.

In coordination with end users, prepare and categorize punch list and ensure that the contractor clear punch list items.

Organization : STEEL CORPORATION OF THE PHILIPPINES

BALAYAN, BATANGAS PHILIPPINES

Position : ELECTRICAL TECHNICIAN

Duration : October 1997 – September 2003

Responsibilities:

Installation, testing and commissioning the electrical equipment like Electrical switchgear, Electrical panel, Distribution Board for lighting system.

Cable pulling, laying and tagging, installation the cable tray and trenches, conduit pipe layout and installation, earth and lightning copper bare bar installation.

Diagnose cause of electrical & mechanical malfunction or failure of operational equipment and performs preventive and corrective maintenance.

Applies electrical and related knowledge to test and modify development or operational electrical machinery and electrical control equipment and circuitry entire plants and laboratory.

Assembles and test experimental motor controls devices, Drives Panel, Lighting switch panels, lightings solenoid valves, lightings fixtures, Pumps Control and other related equipment and components according to engineering data and knowledge of electrical principles.

Develops wiring diagram, layout drawing and engineering specifications for system, equipment modification, installations and maintenance duties.

Plans, direct records the periodic electrical testing, recommends or initiates modification and replacements of equipment which fails to meet acceptable operating standards.

Contact this candidate