Quality Assurance Field Service
Resume:
PROFESSIONAL PROFILE
Dedicated Semicinductor, Jet Turbine Engine and Aircraft Technician with a proven history of successful Semiconductor, aircraft and parts troubleshooting, mechanical skills, and increasing work center productivity. I have over 10 years experience and almost 6 of those as active duty in the Marine Corps, With another 7 years as a Semicinductor technician.
KEY QUALIFICATIONS
Qualified on multiple semiconductor tools.
FAA Physical.
Experienced in Microsoft Office.
10 years of jet engine and aircraft maintenance, inspection and fault isolation/troubleshooting.
Fuel Contamination.
Experienced and certified in Hazmat Control.
Complex parts assembly.
Experieced with complex tools and support equipment.
Root cause analysis.
Extensive knowledge and experience in the troubleshooting, electrical, and mechanical field.
Functional and operational tests.
Technical publication and schematic interpretation.
Quality Assurance Representative.
Collateral Duty Inspector.
Military and leadership training.
Supervisor of workcenter and works very well with a team or individual tasks.
Experienced in computer-aided maintenance logs and parts ordering/inventory.
Multiple support equipment licenses.
Exceptional with multitasking and maintenance action planning.
Low and Hi Power Jet Engine Turn Up.
Turn Qualification Instructor.
PROFESSIONAL EXPERIENCE
Field Service Engineer, Tokyo Electron Limited 01/2025-06/2025
Hillsboro, OR
As an FSE with TEL I was involved in sustaining tools as well as Demo, Install and Modifications for Wet Etch, Thin Films and Surface .
Flow diagram And schematic interpretation
Troubleshooting using multiple skills provided by training such as Kepner-Trago
Creating pre-task plans to make sure any work being performed goes smoothly and safely.
Precision tool use, and diagnostic equipment.
Working close with the customer (Intel) on daily activities and major equipment, installs or repairs.
Providing the safest and most logical means necessary to have the shortest green to green time on any down equipment.
Field service technician, KLA-Tencor 11/2022-05/2024
Hillsboro, OR
In charge of maintaining, servicing, upgrading, installing, and making field changes on semi conductor, chemical analyzers. This duty required precision, dedication, strategy and Customer focus this position required frequent travel, shifts being on-call over the weekend and at night, as well as Remote work.
Flow diagram And schematic interpretation
Troubleshooting using multiple skills provided by training such as Kepner-Trago
Creating pre-task plans to make sure any work being performed goes smoothly and safely.
Working with the customer by myself to come up with the best plan possible For that tool Owner.
Trained as the only FSE to be qualified in multi platforms.
Precision tool use, and diagnostic equipment.
Working close with the customer (Intel) on daily activities and major equipment, installs or repairs.
Providing the safest and most logical means necessary to have the shortest green to green time on any down equipment.
Volunteer safety supervisor for my team.
Vast experience In the safety needed to work in this field.
Maintenance Technician, Portland Bottling company. 01/2021-11/2022
Portland, OR
In charge of the troubleshooting, upkeep and installation of all factory equipment including automation and robotic systems. Systems use Human to machine interfaces much like semiconductors and need constant attention to recalibrate, repair and troubleshoot daily issues that arise.
Field Service Engineer/Engineer In Charge (EIC), LAM Research
Hillsboro, OR
7-years of semiconductor experience of maintaining systems and performing engineering changes on semi-conductors. These systems have very intricate parts and sensors that need constant attention to make sure any system downtime is minimal.
Received multiple awards inculding the “Above and Beyond” award.
Performed complete tool installs and tool decommissions on sight
Awarded the title of EIC( Engineer in charge) while workinmg on the XEP equipmentl set.
Removed, installed, trouble shot and calibrated multiple sensors on the semiconductors
Performed troubleshooting on intricate parts installed on the system
Decresed equipment downtime by quick troublshooting and precise planning.\
Worked for 5 years on wet chemical systems and the last 2 years on gas systems for silicon wafer metal adhesion.
Performed Preventative maintenece and I was also in charge of the overseeing of proper preventative maintenance and scheduling
In charge of all planning, procedures, troubleshooting, Engineering changes and maintenance and an Experimental system from 2017-2018
F-18 Power Plant and Related System Technician, PKL Services
04/2013-09/2020
07/2009 – 04/2013
San Diego, CA
40+ hours a week I perform phase, daily, hourly and special inspections as well as troubleshooting on the F-18 Power plant, secondary systems, fuel cells, electrical components, and aircraft structure. I perform removal and replacement of jet engines, engine and aircraft components, Leak, functional and operational turn up checks, and complying with Technical Directives. I Perform Quality Assurance tasks and inspections as a Quality Assurance Representative, and as an aircraft mechanic.
Routinely preventing un-necessary man hours by catching faults before they become a major incident.
Discovering possible catastrophic engine and aircraft malfunctions before becoming a danger to life or equipment.
Assisting in the completion of and exceeding the yearly goal of 9,000 flight hours by maintaining and trouble shooting the F/A-18 jet engines and accessories.
Assistant Team Lead, General Dynamics Land Systems
04/2009 - 06/2009
San Diego, CA
Retrofitting the Stryker Tank with higher capacity electrical system as well as removal and overhaul of the diesel engines.
My team had the project accomplished 5 days before the given deadline creating more man power to help other teams.
Full time direct employee position offered but would have had to relocate to Texas
E5/Shop Supervisor, United States Marine Corps
07/2002 - 04/2008
San Diego, CA
I was the work center supervisor of a Marine fighter attack squadron Jet turbine engine shop. I was directly in charge of the training and safety of 25 Marines and maintaining 12 F/A-18 fighter jets for mission capabilities. I performed trouble shooting and removal and replacement of aircraft parts routinely, as well as performing phase, daily, hourly and special inspections
5 years 9 months of active duty.
Maintaining mission capable aircraft to complete the yearly flight hour quota in 3 months ahead of schedule.
NCO of the Quarter.
Certificate of Achievement for superior leadership.
EDUCATION
Business Administration SDCCD/SDSU- San Diego, CA
Present
Firefighter 1, Hazmat, Lockout Tagout, Confined Spaces. - San Pasqual Firefighting Academy, Valley Center, CA
2008
Emergency Medical Technician - EMSTA, El Cajon, CA
2008
Technical/Aviation Maintenance - Naval F/A18 Power Plants and Related Systems Organizational Maintenance course 700J, Lemoore, CA
2003
Certification - Naval Theory and Operation of the Jet Turbine Engine, Pensacola, FL
2003
Jet Turbine Engine Theory of Operation. - Naval Aviation Machinist Mates Course A1, Pensacola, FL
2003
USMC Basic Training, San Diego, CA
2002
Ogden High School, Ogden, UT
2002
REFERENCES
Linda Ramsey
Senior Contracts Administrator
General Atomics Aeronautical Systems, Inc.
14200 Kirkham Way
Poway, CA 92064
Michael Driscoll
Jet Engine Technician
PKL Services
MCAS Miramar
San Diego, CA 92145
Devon Colson
U.S. Border Patrol Agent/Customs
Contact this candidate