RAMONE A JONES SR.
EMAIL: ********@*******.***;********@*****.***
Mobile No. 513-***-****
OBJECTIVE:
A position as a Project Designer: With a focus on increasing market, share and outperforming the competition through exceptional product capabilities and reliability, innovative design strategies and cost saving ideas.
EDUCATION:
1986-1988 (MTA) Mechanical Technology Association
Cincinnati, Ohio
COMPUTER SOFTWARE EXPERIENCE:
AutoCAD release (12-2020), SolidWorks 2001-2019/54Plus, Pro Engineering r20-Wildfire 5.0, Inner-link, PDM Link, UG, PRO-E Teamcenter, vault Mechanical Desktop 3, Autodesk Inventor (5-2020), Microsoft Office Package, Catia V5 R15/V5 R22, UG NX 6.0- UG NX 1892 & I-DEAS 5.3.0.14, Stratasys Fortus 450mc, 250mc 3D Printer, Insight V18.10, Control Center 18.10 Cleaning Station, Formlabs 3L, 2 3D printers
WORK HISTORY
May 15, 2024 – Present (Contract)
HUNTER DEFENSE TECHNOLOGY Florance, KY
LEAD MECHANICAL DESIGNER
ESSENTIAL FUNCTIONS: Missile Systems and Transport
Responsible for Creating and Designing King Pin Hydraulic Jacks Moving in a Longitudinal and latitudinal Direction Using Various Metals and Complex Sheet Metal Shapes to be lift Missile while Transporting to the next stage.
Designed Hinge Pins Moveable Hydraulic Jacks for the Rear Trailer Per Northern Grumman Specification for the Government Sentinel Project. Using Siemens UGNX.
August 08, 2021 – Present (Direct Hire)
INTEGRAL FEDERAL Inc., WPAFB Dayton, Ohio
Sr. MECHANICAL DESIGNER
ESSENTIAL FUNCTIONS: Air Force Research Laboratory
Performed Field Measurement for new Child Water Return and Supply Piping, Hydraulic Piping and Fuel Line Piping.
Created Pipe Routing for Glycol Make-up Tanks, Expansion Tanks. Clean Air Facilities, Evaporative cooling Discharge Systems with Heat Exchangers Facilities, Tower Water Systems, Hydraulic Systems and Air Handling Units/Chilled Wate Units.
Created Sheet Metal Drawing for Exhaust Duct Assemblies for Air Handling Units and Piping for Chiller Units Per P&ID.
Created all Piping and Duct Work From 3D Models using Siemens UGNX 1855 Series and AutoCAD 3D/2D Drawings 2020 /24 for Deliverables.
All Deliverables Drawing to be Performed with A/E/C Standard (US Army Corps of Engineers).
Printed out 3D Models for Customers using Stratasys Fortus 450mc, 250mc Printers, Preformed Slicing models, changing print heads, preforming calibrations and Maintenance, adding modeling material and support materials to printers.
Trained new employee/s for supported current Position Design Position.
March 05, 2018 – 2021 (Contract to Direct Hire)
MENDENHALL TECHNICAL SERVICES, Inc. Fairfield, Ohio
Sr. MECHANICAL DESIGNER
ESSENTIAL FUNCTIONS: Gas Turbine Systems Designs
Detailed Drawings and Assemblies for Water Wash Systems (Marine Projects).
Created Tube Routing and Wiring Assemblies/Drawings for Gas Turbine Engines for US, South Korea, Italian and India Navy.
Created Sheet Metal/Electrical Equipment Models and Drawing for Electrical Starting’s Systems (EES) for Gas Turbine Engines
Ranging from GE LM500 to GE’s Planned LM9000.
Created and Prepared Conceptual Design Drawing Packages with Completed Dimensions and standard Weldments.
Created Piping Welding Jigs Assemblies/Drawings, Piping/Tube Pressure Test Jigs Drawings/Assemblies and Fuel Forwarding Skids
For Diesel and Methanol Fuel Systems with Fire Protection.
Completed Monthly Safety Training and 2020 Eagle AS9100 Audit Training & Awareness.
March 09, 2017 – February 19, 2018 (Contract to Direct Hire)
THE ARMOR GROUP, Inc. Mason, Ohio
MECHANICAL DESIGNER
ESSENTIAL FUNCTIONS: Industrial Washing Machinery
Designed Conveyor Can Washing Machines with Dry-off Finishing Ovens.
Designed and Detailed Welded Structural Base for Pre-Washer, Washer, Base with Conveyor Roller and Dog-Bone Belt Guides and Take-Up Frames.
Created and Designed Pump Base for Energy Efficient Motors with Thermal Insulation, VFD Motor Control, Low Operating Temperatures Optimizing Pump, and fan Selections.
Created Sheet Metal Drawing with Flat Patterns for all Tanks and Housing with Race Ways and Race Ways Horizonal, and Vertical Support Structures.
Assembled 3D Pipping Drawings and BOM from Piping and Instrumentation Diagram (P&ID), Piping Include with Manual and Pneumatic Butterfly Valves, Expansion Joints, Flanged Globe Valve, Check Valve, Flow Meters, Check Valve Back Flow Preventers, Spray Valves, etc...
Assembly of Conveyor and Drawing with Herringbone Pallet Belt Support and Guides Rails, Dodge Bearings, Browning Drive Tighteners, Roller Belt
Tensioners, Keyed Shaft and Sprockets, Belt Suction Assemblies, Reject Conveyor Assemblies, Oven Dryer Assemblies and Control Cabinets.
November 12, 2015 – February 23, 2017 (Contract to Direct Hire)
DARLING INGREDIENTS INC. Cold Springs, Kentucky
Sr. MECHANICAL DESIGNER
ESSENTIAL FUNCTIONS: Rendering Food Process
Coordinated and Prepared 3D Commercial Buildings for Rendering Plant, With Mechanical Equipment, Duct and Piping Layouts.
Fabricated Models and Drawing Consist of: Screw Conveyors, Hoppers, Mixers, Hydraulic Tote Dumpers, Skimmer & Mixers Platforms,
Grinders Discharge Screws, Raw Material Incline Hoppers, Air Cooled Condenser/Catwalks, Spray Chambers, Air Fin Cooler Scaffolds, Packed Towers, Venturi Scrubbers, Bucket Elevator, (Press Feed), Lifting Cranes (Hoist/Trolleys), Run-Around Support Structures, Centrifuge Surge Tanks, Sunrise Pop Tanks, Feather Hydrolyzer, Feather Press, Coagulators, Crax Discharge Drainers, Head Knocker Conveyors, Silos, Tallow Process Tanks, Agitated EQ Tanks, Blood Storage Tanks, Interior Overhead Catwalks.
February 03, 2014 – October 28, 2015 (Contract)
HONDA MFG OF AMERICAS Maryville, Ohio
MECHANICAL DESIGNER
ESSENTIAL FUNCTIONS: Tooling Designs
Received Technical Data Sheet (Specs Sheet) From Lead Engineer to Create Correct Tooling Per Customer Specifications.
Assembled Tooling Models, Assembles, Drawings and Bill of Materials for Outside Fabrication (CATIA V5 R20).
Created Pallets to Connect Sub-Frame to Engine, Utilizing and Designing New Nut Runners Spindle Box’s, Offset Gear Box’s Air Cylinders, Actuators Pressure Control Valves (SMC Pneumatics Product).
Created Order-Form for All Equipment Unitizing Microsoft Excel.
April 03, 2011 – January 22, 2014 (Contract to Direct Hire)
AGC AUTOMOTIVE AMERICAS Hebron, Kentucky
PRODUCT DESIGNER (ADVANCED PRODUCT DEVELOPMENT)
ESSENTIAL FUNCTIONS: Automotive A & B Surfacing Designs
Redesigning A and B Surfaces of Encapsulations for Side windows created Bezels for General Motors, Ford Motors, Tesla Motors,
Nissan Motors, Honda Motors, and Mercedes. (UGNX, Teamcenter, I-DEAS CATIA V5 R20).
Created Car Set Assembly Drawing using GD&T and Basic Dimensioning for Fabrication Department. (UGNX, CATIA V5 R20)
Created Reveres Engineering Models/ Drawings for A and B Surface/s (UGNX, CATIA V5 R20).
Designed Heating, Antenna Silver Element and Harness Designs for Backlights for Future Car Models.
September 07, 2009 – March 23, 2011 (Direct Hire)
REPS RESOURCE ENGINEERING INC. Cincinnati, Ohio
DESIGNER / ILLUSTRATOR
ESSENTIAL FUNCTIONS: Aircraft Engine Tooling Designs / Mobile Environmental Systems Designs
Creation of New Tooling Design/Drawing for Siemens Aircraft Engines (UGNX 7.5)
Created illustration Drawing for Aircraft Engine Repairs (AutoCAD 2010, UGNX 7.5 CGM Files, and Microsoft Word Files)
Designing Mobile Environmental Systems for DRS MES Technologies / Harris Engineering Inc. (Pro/Engineer Wildfire 5.0)
Modifying Existing Models, Sub-Assemblies and Assembles for Production (FTT) Florida Turbine Technologies (UG NX7, Pro/Engineer 3.0)
January 08, 2007 – August 18, 2009 (Direct Hire)
BELCAN CORPORATION Cincinnati, Ohio
SR. MECHANICAL DESIGNER
ESSENTIAL FUNCTIONS: GE Offshore Drilling oil and gas and Turbine Engine Designs
Receiving Customer packages, designing per sales order (Pro-e wildfire 3.0, Inventor 11 and AutoCAD 8,9)
Created Pro NC models drawings using GD &T tolerance and BOM.
Created fabrication drawing for engine ventilation.
Trained new Contractor employees/Co-Ops and Project Managers on AutoCAD, Autodesk Inventor, PRO-E Wildfire software.
Created Models designs for wellheads, telescopic joints, risers, spiders, diverters, mandrels, ventilation duct and support structure,
Cranes and engine piping lines
Created Microsoft Office PowerPoint presentation for web site using previous designs and models work on
August 01, 2005 – December 28, 2007 (Contract Position)
TOYOTA MOTOR MANUFACTURING TMMWV Erlanger, Kentucky
POWERTRAIN PROJECT DESIGNER
ESSENTIAL FUNCTIONS: Machine Engine Designs
Setup New Standards for Power train design packages.
Received drawing from TMC Japan, converted to US English Standard.
Created Engine Operation drawing for TMM teammates fabricators.
Created Machine layouts for Camshaft, Crankshaft, Connecting Rod, Cylinder Head Cylinder Block and Assembly lines.
Created Machine Piping, Machine layouts, Structural Building Expansion Bid Drawing for Contractors
Trained new Contractor employees/Co-Ops on AutoCAD, Autodesk Inventor, PRO-E Wildfire software.
Machine Installation Packages such as Induction Hardness machines for Installers.
January 03, 2005 – July 22, 2005 (6 Month Contract Position)
GENESIS ENGINEERING INC. Cincinnati, Ohio
PROJECT DESIGNER
ESSENTIAL FUNCTIONS: Machine Designs
Designed Machine Designs for Conveyor, labelers, and pallet stacker (Inventor)
Created and developed Moving constraints and automations within assemblies (Inventor)
Trained employees using 3D AutoDesk Inventor
February 03, 2003 – December 31, 2004 (Contract Position)
PROCTER AND GAMBLE Westchester, Ohio
DESIGN ENGINEER
ESSENTIAL FUNCTIONS: Automation Machinery Designs
Created Tooling drawings for new sorter type machines (SolidWorks).
Created all drawing using GD&T. Created die drawing for new machinery.
Parts Used: Electric Motors, Cylinder Slides, Barrel Cams, Robohand Grippers Parallel, Feed Escapement, Double Side Rails,
Flexlink Conveyor Parts, Aluminum Extrusion Mounting Rails, SMC Rotary Tables, Control Cabinets, Electrical Raceways,
Pneumatic Manifolds, Various Type of Gears and Sprockets.
January 01, 2002 – January 24, 2003 (Contract Position)
CINCINNATI SUB-ZERO Cincinnati, Ohio
DESIGN ENGINEER
ESSENTIAL FUNCTIONS: Machine Test Chambers
Design new product test chamber (AutoCAD / SolidWorks)
Accountable for designing 3d mechanical drawing for shop fabricators. (AutoCAD / SolidWorks)
Created and developed new exploded views and sub for fabrication department. (AutoCAD / SolidWorks.)
Release mechanical fabrication drawings associated with tooling, sheet metal, welded parts, piping, refrigeration, and electrical.
Created and developed Surface molding for test Chambers and other products. (SolidWorks)
March 01, 1999 – September 14, 2001 (Direct Hire)
ROUGH BROTHERS INC. Cincinnati, Ohio
PROJECT DESIGNER
MAJOR PROJECT: The United States Botanic Garden
ESSENTIAL FUNCTIONS: Conservatory’s
Created mechanical and tooling drawings for manufacture using (SolidWorks / AutoCAD)
Designing of the US Botanic Garden Center project with customer, vendors, and manufacturer for completion of Blueprint
Provided proposal drawings for licensed Architects and Engineers Assisted construction workers when needed.
Required a complete list of bills for materials used per project, Attended weekly team meetings.
Design projects per codes. Responsible for providing complete installation instructions per project.
Attended weekly continuous improvement team meetings.
Lead Designer, Started New Branch of Airport Structures
Responsible for setting up new standards in AutoCAD/ Solid Works 2001plus for co-workers.
Applied detailed mechanical drawings for fabrication.
Responsible for ordering all raw materials for fabricators. Design of weldments for all welded parts
June 12, 1992 – March 10, 1998 (Direct Hire)
TORBECK INDUSTRIES Harrison, Ohio
PROJECT COORDINATOR
ESSENTIAL FUNCTIONS: Mezzanines /In-Plant Offices
Redesigned existing machinery (punch press/and hydraulic press) increased productivity up 60%.
Accountable for Mezzanines designs for dealers/ distributors. (AutoCAD / Pro Engineering)
Create structural and mechanical drawings for interior and exterior offices with HVAC water pumping systems (AutoCAD / Pro Engineering).
Provide manufacturing associates with precise fabrication drawings.
Created 3d construction drawing packs for end-user. (AutoCAD / Pro Engineering)
Answering technical questions related to installation when necessary.
Provide instructions, training and assistance to others when needed on (AutoCAD and Pro Engineering).
Attended group interviews, made hiring recommendations. Completed JIT training. Provided input on the performance of the engineering group.
REFERENCES AVAILABLE UPON REQUEST