Electrical Designer Iii

WILLIAM C. BERG JR.

**** ***** **** **., ************, FL 32277

Cell: 904-***-****; Email: ******@*******.***

PROFESSIONAL SUMMARY

Accomplished and results driven as an Sr Electrical Designer III, creating and implementation of Electrical design for several companies and countless capital projects. Serving in that capacity not only demanded total technical understanding but also the ability to excel in the process of creating scope of work, Instructions to Contractor, and tracking document development. Handled project suppliers, vendors and led/motivated subordinate designers to accomplish project goals achieving objectives on time or ahead of schedule. In today’s efforts, acting in the capacity of Sr Electrical Designer III in the Electrical/ Instrumentation & Controls design teams to produce construction documents such as 3D Cable Tray & Conduit deigns, underground manholes and duct banks, MCC development, Single lines, and electrical room layout and field plans for the following industries. Facility design, power distribution and control for fossil and nuclear fuel power generation plants, chemical plants, cement mills, co-generation (single and combined cycle) Turbine power generators, electrostatic precipitators, pulp & paper, petro-chem., bulk foods industrial manufacturing industries.

Many years of experience in the following software programs; AutoCAD 2D & 3D, AutoCAD, Plant 3D Design modeling, Electrical 2012, PDMS 3D Modeling, ETAP, Microsoft Office, PDS Bentley V7-V8 XM, Equip Modeling. Microsoft Office programs, word, excel, etc.

PROFESSIONAL HISTORY

Contract Diversified Design, LLC at EGS Engineering Group Southeast

Joined EGS as a Remote contract employee in May 2024 under self-employment of Diversified Designs, LLC. Developed designs for installation and transmission of electrical power from 15kV-480 single line schematics, cable tray design, underground duct banks, manholes and conduit plans. Providing cables according to the client’s specifications requirements for multi-conductor cables. Developed Loop drawings from I/O documents and created interconnection wiring diagrams. Prepared MCC designs and layouts, for various motors by across the line motor starters and Variable Frequency Drive (VFD). GP-Brewton, AL & GP-Cedar Springs, GA

Symrise Chemical 4/2017 – 4/2024

Joined Symrise fragrance and aromas in April 2017 under self-employment of Diversified Designs, LLC. Developed Plant wide 2400- & 480-volt single line diagrams. Detailed MCC loads and created single line drawings indicating operating loads and total connected loads, Calculated voltage drops for wire sizing and utilizing this data to designs cable trays and underground duct bank details. Recovered and Developed installation design documents for min-substation construction and installation. Extracted information from single line diagrams to create plant area drawings depicting facility distribution and installation drawings. Developed PCS7 control cabinet construction & assembly drawing, BOM’s, and ladder schematic and Interconnection wiring diagrams for Siemens SEMATIC S7-400 & SEMATIC ET200SP HA 24vdc & DCS Delta “V”, control systems. Developed Loop diagrams as necessary and updated P&IDs drawing.

Jedson Engineering, Jacksonville, FL 07/2015 - 07/2017

Created electrical drawings, 3D AutoCAD modeling and details to support the instrument / electrical installation (PLC & DCS Cabinet Layout and design, Layout of IO cards, analog and digital, PLC Interconnect diagrams, Instrument Loop diagrams from Dwg's updating client drawings, electrical equipment location drawings, detail drawings, schematics, wiring diagrams, etc.) Additionally, perform ampacity, voltage drop, freeze protection and 3D cable tray design and sizing calculations for the development of electrical installation drawings. Develop installation work instructions to the contractors for construction and construction estimates from electrical installation drawings according to current NEC and IEC 61936-1 codes. Assist in the development of project schedules and manpower requirements. Office was closed in August 2016 GP-Palatka, GA

Johnson Service Group assigned to Hydro-Chem, a Division of LENA, Canton, GA 04/2014 - 05/2015

Develop instrumentation / electrical installation drawings (one-line diagrams, underground duct bank, electrical equipment location drawings, 3D AutoCAD modeling and detail plan drawings, schematics, wiring diagrams, etc.) Additionally, perform heat tracing design installation documents, ampacity, voltage drop, freeze protection, and cable tray sizing calculations in support for the development of electrical installation drawings. Develop designs in compliance with NEC and IEC 61936-1 codes. Assist in the development of project schedules and manpower requirements, construction estimates from electrical installation drawings. Hydro-Chem closed shortly after being purchased by Linde Corporation

Lutech CB&I / Shaw Power, Vogtle Nuclear Power Plant, Waynesboro, GA 03/2012 - 4/2014

Lutech CB&I, Charlotte, NC

Charlotte NC office: Nine Mile Combined Cycle power generation power plant located in New Orleans, Cable and raceway sizing and routing Protective 125vdc and 120vac relay connection diagrams for 115kV and 230kV High Voltage Swgr.

Plant Vogtle Nuclear Power Plant; designed raceway from field devices to controllers overhead and underground distribution duct-bank and manholes 2D and 3D modeling. Plant and area grounding designs and details.

Bechtel Engineering, Frederick, MD 3/2011- 3/2012

Nuclear Update Projects preparing outage design packages for Davis Bessie, and Port St. Lucie nuclear power plants utilizing Acad2011 and PDS Micro Station V7-8XM. The Unescorted badge at Davis Besse Nuclear Power Plant created electrical design, power, and control documents for a hydraulic crane on D ring, first containment. TVA’s Bellefonte Nuclear restoration project where I developed walk-down packages for field personnel; to record current conditions of electrical equipment.

ENERCON Engineering, Germantown, MD 01/10 - 3/2011

Electrical Nuclear Design: Badge for un-escorted access & SGI clearance to James A Fitzpatrick Nuclear Power Plant in Oswego, NY. Provided design and engineering documents for the security upgrade project in AutoCAD. Site Specific electrical design, medium & low voltage underground duct banks, tray & Conduit Raceway design Non-Class 1E. Exelon Monticello Nuclear Power Plant. Safeguard Information (SGI) FBI background check for entrance to first and second containment. Updating and creating classified design engineering documents. Point-to-Point Interconnect wiring, and DCS connection diagrams. Appendix “R” rework of elementary wiring diagrams and schematics, design, and load calculation for rerouting of conduit and cable trays to isolate 1F & 1R conductors to meet NRC safety fire standards and emergency shutdown of core spray nozzles, first and second containment.

Bechtel Engineering, Frederick, MD 2008 - 12/2009

Provided design and engineering documents for the security upgrade project in AutoCAD. Created design documents for Class 1 E and Non-Class 1 E nuclear power plants using PDMS 3D model and AutoCAD 2007 through 2011, 2D and 3D. Developed underground duct bank for medium voltage 13.8 and 6.9kV distribution duct banks and low voltage 480 Division & Train drawings by creating single line drawings and utilizing ETAP software for heat and cable pulling calculations. Sizing power cables for tray and conduit raceway systems. Developed physical equipment arrangement drawings for electrical distribution rooms and field raceway systems. Estimated equipment, emergency and lighting electrical loads for the nuclear island and balance of plant.

Self Emp WW Berg, Inc, Bis Fru-Con Engineering Tallahassee, FL 10/2007 - 6/2008

Concrete mill and pulp and paper construction drawings for 115kV-24vdc, 3D modeling equipment arrangements, detailed 3D cable tray routing and bill of materials, switchgear design layout and arrangements, switchboard & MCC's elevations, single line, elementary wiring, Point-to-Point Interconnect wiring, and DCS connection diagrams, instrument loops and grounding diagrams. Calculations for cable sizing, heat (ETAP) and voltage drop, breaker sizing (AIC); and cable tray conductor and conduit sizing calculations. Lighting design, interior, exterior and emergency, industrial or commercial. Process control, schematics, P&ID’s, and equipment arrangements for the various control systems for turbines" de-watering presses, conveyors, bucket elevators, precipitators, tire molding presses utilizing PLC, relays, motor starters and variable frequency drives for 480, and 13.8kV motors. Specification writing or cost estimating for all projects.

Neill & Gunter, Scarborough, Maine 5/2004 - 5/2007

Drawings include facilities power distribution 115kV-24vdc, 3D modeling equipment arrangements, detailed 3D cable tray routing and layout, switchgear design layout and arrangements, switchboard & MCC's, elevations, single line, elementary wiring, Point-to-Point Interconnect wiring, and DCS connection diagrams, instrument loops and grounding diagrams. Calculations for cable sizing, heat ETAP and voltage drop, breaker sizing AIC; and cable tray, conductor, and conduit sizing calculations. Lighting design, interior, exterior and emergency, industrial or commercial. Process control, schematics, P&ID’s, and equipment arrangements for the various control systems for turbines, dewatering presses, conveyors, bucket elevators, precipitators, tire molding presses utilizing PLC, relays, motor starters and variable frequency drives for 480, and 13.8kV motors. Specification writing or cost estimating for all projects. Design build (Fast Track) with construction support. 3D model programs PDMS, Release 9 through 2009.

Parsons -GUBMK Constr. Chattanooga TN 5/2003 - 4/2004

Liaison between project engineers 1 designers and contractors to ensure construction complies with design, applicable electrical codes, and safety specifications. Specifically, the latest responsibility was for the coordination and installation of a Selective Catalytic Reduction System (SCR) at TVA's Colbert Fossil Fuel Power Generation Plant in Tuscumbia, Alabama and Paradise, Kentucky, a 265 million dollar retrofit project. Responsible for the review of construction documents and specifications prior to installation by the electrical craft, verifying that all vendor supplied equipment meet or exceed engineering specifications. The generation of Requests for Information (RFI's) when conflicts occur between construction documents and field conditions. Other duties include the generation of Purchase Requests (PR's) to complete the installation and electrical connection to distribution or operating equipment. Continual monitoring of the installation for quality control and safe construction practices.

Harris Group, Denver, CO 8/2001 - 4/2003

PLC, relays, MCC arrangement, motor starters and variable frequency drives for 480, and 13.8kV motors. Specification writing or cost estimating for all projects, multi-stage combine cycle co-generation power plant San Jose, CA. 115kV, 5kV and 480-volt underground power distribution. ETAP, heat calculations & cable pulling tensile strength calculations. Tray and conduit raceway design, percentage of fill and weight calculations.

Watkins Engineers & Construction, Tallahassee, FL 9/1998 - 7/2001

Concrete mills 15kV power distribution Single lines, cable sizing, raceway design underground duct bank design, heat & cable pulling tensile strength calculations by ETAP. Interconnection diagrams for instrumentation and controls. Instrument loop diagrams. General and emergency egress plant lighting, for platforms, interior and exterior.

Proctor & Gamble, Cincinnati, OH 12/1997 - 9/1998

Proctor & Gamble towel and tissue converting plant in Cape Girardeau, Mo. Generation of 2D & 3D power, instrument and control construction documents. 5kV to 480-volt power distribution single lines, control ladder schematics, instrument loop diagrams. Cable tray and conduit design, raceway sizing, underground heat and transformer, calculations. General and emergency lighting systems for towel and tissue converting machines.

Technical Associates Albany, GA 06/1995 - 11/1997

Proctor & Gamble towel and tissue converting plant located in Albany, GA. Generation of 2D & 3D power, instrument and control construction documents. 5kV to 480-volt power distribution single lines, control ladder schematics, instrument loop diagrams. Cable tray and conduit design, raceway sizing, underground heat and transformer, calculations. General and emergency lighting systems for towel and tissue converting machines.

EDUCATION:

Valley Stream South High School, four years of drafting.

Farmingdale University, two years technical illustration & design.

Washington University, four years electrical engineering sciences. non-degreed

Rad II Certification from DOE Westinghouse Hanford energy reservation

Aviation Certified Single & Multi-engine land, instrument instructor.

Contact this candidate