Structural Analysis Luxury Brand

Location:

Posted:

June 03, 2025

Resume:

I am an award-winning architect and designer with existing knowledge and interest

in architecture, digital fabrication, and construction. I possess excellent communication skills, including written and spoken. I am creative, and I pay attention to details. I have a keen eye for aesthetics and the ability to innovate and commit to fulfilling a luxury brand look.

Address: 15 A street Hampton NH 03842

Tel: 617-***-****

e-mail: ***.**********.******@*****.***

Instagram:

Amir Roseberry Aka

KHALED AMIR BENAIDA

EDUCATION AND TRAINING

FROM 08/2016 -07/2018

• Master of Science in architecture at UNL, NE, USA Force-Driven Weave Patterns for Shell Structures in Architectural Design Under the Supervision of Professor David Newton

Lincoln, Nebraska July, 2018

Thesis:

https://digitalcommons.unl.edu/archthesis/183/

The use of lightweight carbon fiber reinforced polymers (CFRP) in the discipline of architecture opens new possibilities for the construction of architectural components. CFRP has been explored mainly in engineering fields, such as aeronautics, automotive, ballistic and marine engineering. CFRP has also been explored in the discipline of archi- tecture in the construction of shell structures because of its high strength-to-weight ratio and low-cost. There is, however, limited research on how structural analysis can be used to inform weave patterns for shell structures using CFRP. Further, previous research in the field has not performed physical structural tests to validate which force driven weave patterns perform best. This thesis addresses this gap by contributing a methodology for the creation of CFRP weave patterns from structural analysis and their validation through physical testing. Specifically, this thesis addresses three main problems: Firstly, under- standing and analyzing the structural behavior of a shell structure through computation; Secondly, the creation of a weaving pattern of carbon fiber optimized for structural perfor- mance; the third part seeks to translate the digital model into fabricated prototypes. The results of this research show that force-flow derived patterns perform best. Consequently, force-flow is the information we should implement to create a more efficient force-driven weave pattern in shell structures.

Resume

FROM 10/2008 -06/2013

• BARCH degree in architecture ‘’EPAU” (Algeria).

For my undergraduate thesis at “Ecole Polytechnique d’architecture et d’urbanisme” of Algiers, I made energy rehabilitation of our School in collaboration with «Technische Univer- sitat Berlin» involving the concepts of innovation, performance, and energy efficiency. CREATIVE PRACTICE AND PROFESSIONAL WORK

From: Oct 2019 – Dec 2022: COMPETITIONS ENTRIES:

• La biennale DZIGN 2020+1.

• eCAADe 2020 Conference.

• Evolo Skyscraper Competition 2020.

• Horm 2022: WIN YOUR DESIGN—Italy.

• 2022 One Drawing Challenge.

• ACADIA 2023: HABITS OF THE ANTHROPOCENE: SCARCITY AND ABUNDANCE IN A POST-MATERIAL ECONOMY. Feminist Thinking [Project:Gisele Halimi Library]

• Lyx architecture competition: Dubai Benghatti residential tower 2023.

• W Awards 2024: Architecture Journal.AJ 2024.

From: October 2019–Sept 2022: CINEMA

I worked on two design projects (with Oscar-nominated movie directors): Djaffar Gacem and Ahmed Rachedi.

1• Djaffar Gacem: Producer: Karavan prod Sultan Achour 10 ou Sultan Achour. 2• Ahmed Rachedi: The rehabilitation and redesign of the president of Algeria’s presidential room.

3• I designed, with a group of artists from “beaux-arts,” 3 desks for a TV show for the brand new TV channel AL24.

4• I designed, with a group of set designers, the Algerian version of the biggest loser TV show.

From November 2018 to May 2019. [Architect at Architect at Halim Faidi-Studio A] Responsibilities:

1• Collaborate on Design Projects: Luxury Villas. Client: Bendimred 2• Place Kennedy El Biar:

• Help plan and design buildings with a team of architects. Brainstorm project ideas, com- plete design drawings in AutoCAD, and assist in reviewing project proposals, remaining a part of the process from conception through development.

• Schematic design (SD).

• Design development phase (DD).

FROM 10/2015 - 01/2016

• DIA (DESSAU INTERNATIONAL ARCHITECTURE) Studio Liss Christine Werner (Germa- ny). In the fall of 2015, I spent one semester abroad at DIA (Dessau International Architec- ture) at the Bauhaus in Dessau, Germany, where I was a student of emergent architect Liss C Werner. We discussed topics related to computational design, kinetics structures, and cybernetics.

You can find my folding paper work on her website: https://tactile-architecture.com/. 03

FROM 05/10/2014- 18/02/2015 [Architect SARL ELMiriMouli des engagements.] https://www.instagram.com/miri.promotion/?hl=en

https://www.miripromotion.com/

Responsibilities:

• Developing and preparing technical and commercial offers of tenders and/or consultation.

• inspecting and looking after high-end fit-out materials and their installation on site.

• Inspecting and witnessing the site acceptance tests of concrete; consult engineers from CTC Algiers and specialists for materials required for the construction.

• Preparing documents and attachments and invoices for contractors.

• Business or sector: construction or civil engineering. FROM 08/07/2013 - 05/10/2014 [Architect ADD BETON] https://www.addbeton.com/

Responsibilities:

• Developing and preparing technical and commercial offers of tenders and/or consultations:

• Projects:

1. great mosque of Algiers with CSCEC (4.000 fire-rated doors). 2. Project monitoring of the new Faculty of Medicine of Algiers designed by Zehnder GmbH and exe- cuted by COSIDER CONSTRUCTION.

• Keep records of different contracts, the details of the project, the cost and budget details, the time limit, and the day-by-day progress report.

• Conduct supervision responsibilities in adherence to guidelines as indicated in our clients’ supervi- sion manual; ensure that supervision guidelines are being adhered to by site architects at all times.

• Review and assess contractors and sub-contractors’ pre-qualifications; inspect their showrooms, workshops, and factories as and when required. Email correspondence with SANCO (wood fire-rated doors) and ZANINI (steel fire-rated doors) in case of inadequacies or problems found in the manufac- turing or installation on site (new Faculty of Medicine of Algiers). 3. Ultra-confidential project: Holden Douera.

• Keep records of different contracts, the details of the project, the cost and budget details, the time limit, and the day-by-day progress report.

• Designing individual houses for private clients. Drafting plans, sections, and facades in AutoCAD or Photoshop

• Schematic design (SD).

• Design development phase (DD). 3D axonometric rendering of apartments. 04

TEACHING

Lecturer, Graduate Design Studio SP3 of Algiers EPAU

• Collaborate on implementing new teaching methods for the Graduate Design Studio (the sustainable architecture heritage of Ms. Ferhat Sara).

• Evaluate student performance, respond promptly to grade determination, and facilitate class instruction.

• Constantly advise students on parametric and graphic design and related software like Rhino7 and Grasshopper.

2019 –

present

Fall 2021 Graduate Design Studio SP3: Sustainable architecture heritage Case study of Algiers. Graduate Design Studio SP3: Sustainable architecture heritage, Coastal planning and urban developpement.

1.Case study of Cherchell:

Cherchel maritime navigation and fishing school. Student: Sid Ali Mammar Chaouch Fresh fish Transaction Mall. Student: Ayate Abdelrahim. Fisher man village.Student: Zaatout Hamza

Phoenician Memory Maritime Museum. Student: Djegboub Yousra. 2.Case study of Annaba:

The Gate. Student. Yesref Younes

Spa-Radise.Student. Houari Noureddine

Village des pecheurs. Naili Mohamed Ahmed Rami

The phoenicien journey. Benmoussa Rafik

The Narrator Resort. Bouchra Fatma zohra

3.Case study of Bethioua:

Portus Magnus Museum.student Benaouda Aya

Science grid.centre des sciences marines student. Benchikh Abdellah The AquaQuest: l’aquarium public student. Bouchneb Rania Fishtopia: centre de reproduction et de preservation du poisson menace.student. student Smail Cila.

4.Case study of Tenes :

Adima's maritime terminal. student Habila Rihem

Adles Resort. student Gharbi Chaima

Palais de festival. student Senouci Meriem

Le musee d'histoire des phoeniciens. student Benhammadouche Farouk Startup seminar:

• Help and advise student: Djamil Hassene Hamida to create his startup using digital fabri- cation technologies (Arduino and CNC) to create a future smartphone application label at Ministry of startups and higher education: a Smart Shading System taking into consider- ation three objectives: Reduce energy Consumption, contemporary dynamic design, Easy & smart control.

• Assist as member of a jury the studio/faculty for Thesis and midterm reviews. Spring 2022

Spring 2023

Fall 2020

Spring 2021

Graduate Design Studio SP3: Sustainable architecture heritage Case study of Algiers. 05

SERVICE

• Biennale de Venice Architecture 2020- Architecture Heritage-Algeria/Italy.

• AFAC North Africa Cultural Program (NACP)-REGIONAL FUND. Lebanon/Algeria/Swit- zerland.

• Houston Food Bank 2017.

• Capital Area Food Bank, Washington DC 2018.

• LGBTQ community engagement: AIDS association in Algiers 2019. Fall 2019

Spring 2020

AWARDS AND HONORS

• FULBRIGHT FOREIGN STUDENT PROGRAM AUGUST 2016-JULY 2018.

• Full tuition waiver from the University of Nebraska Lincoln, USA.

• Houston Fulbright enrichment Seminar 2017.

• MFA Trustee scholarship from MCAD, Minnesota, USA.

• Global footwear Awards 2020- [silver category].

https://www.globalfootwearawards.com/winners/gfa/2020/303/0/

• Global footwear Awards 2022 [HEAL U=U].

https://www.globalfootwearawards.com/winners/gfa/2022/662/0/ Fall 2023

Spring 2024

Graduate Design Studio SP3: Sustainable architecture heritage, Coastal planning and urban developpement. :Case study of Cherchell, Tipasa, Oran,Tenes.

• Big Omaha May 2017 exhibition of [drawing machines] with Professor Santiago Perez.

• UNL Union exhibition on islamic architectural patterns 2018.

• World Architecture Festival Virtual 2020.

• FACON 2022-Poster presentation: “Force Driven Weave Pattern for Shell Structures in Architecture Design.”

https://fulbright.org/2022-conference-presenters-2/ EXHIBITIONS:

1. sustainability, green building, and energy efficiency in the MENA region. 2. Material intelligence MI, computational design CD and digital fabrication (robotic 3D printing), parametric design, and kinetics facade systems. 3. high-rise structural systems: exoskeletons, diagrids. 4. shell structures (TPMS, FRP)

FIELDS OF INTRESTS:

-Pack office

-Photoshop

-AutoCAD

-3D Printing/CNC

-3DS max

-sketch up

-In Design

-Rhino 7

-Grasshopper

-keyshot 7.

-REVIT

Computer skills:

•Workshop on energy efficiency and the built environment at [Technische Universität Berlin] 2013.

•Workshop ACADIA 2017 [MIT Computational Research in Architecture and Structures]. http://2017.acadia.org/schedule.html

During this workshop participants learn how to address advanced research questions in architecture, structures, and digital fabrication through computation. On the first day, we will set up a development environment for scientific programming that will be used throughout the workshop, followed by a

“scientific Python 101” and an introduction to compas, an open source, Python-based framework for “computational research in architecture and structures”. The introduction covers the key concepts of the compas framework and a series of representative code examples. The second day, is a step-by- step breakdown of the computational aspects of one of the recent core projects of the Block Research Group. The final day is a hackathon during which the participants have the chance to explore compu- tational solutions to their own research problems with the help of the workshop tutors.

• Workshop FIBROUS AGENCY Florence July 2017. [ZAHA HADID Architects]. https://www.professionearchitetto.it/formazione/notizie/23872/Encodedfields-Fibrous-Agency-work- shop-di-design-avanzato-con-gli-architetti-di-Zaha-Hadid-Architects-e-Coop-Himmelblau The workshop was divided into two complementary parts. In the first part of the workshop, we looked at field conditions and how to generate or design such fields that can help structure a possible urban condition. The second part of the workshop was built upon the first phase. Students will be required to select one archetype (high rise tower) generated in the first part, which will be used as a study mod- el to develop a detailed facade study. In the first part of the workshop, we will be exploring dynamic systems, geometric systems, and network theories to generate and design an abstract field condition. A field builds complexity upon its capacity to integrate modularity, gradients, and differentiation within a highly legible and coherent system. The system builds up complexity based on a series of sin- gle redundant component (rule) operations. The degrees of change within the system will be based on a simple set of rules (environmental) that would drive parametric versioning and typological differen- tiation. Simple operations that would span variations from an initial state will give rise to high level of complexity.

Workshops:

Contact this candidate