Quality Assurance General Manager

Name: SUNEEL KUMAR. REMALLI

Current Employer: Raychem RPG Private limited

Current Designation:

HOD -QA & Testing

Division MANAGER/AGM

Expected Designation: Dy. General Manager and above Contact Nos.: +91-768*******

Email: ******.*******@*****.***

Total Experience: Around 20 years

Relevant Industry Experience:

20 yrs. In oil & dry type CRT,VPI distribution

& Power Transformers Quality and testing

from 5kVA to 500MVA up to 765kv class/

Lead internal auditor

Expected CTC: As per company standards

Notice period: 2 months

Current Location: Pune

Willingness to relocate: Yes

Highest Qualification B.Tech (EEE) & MBA(operations) Reporting to: Vice president/SBU head

Team Size Handled: >120 members

Communication skill: Good

Reason for job change: Better growth opportunity

When can attend the interview? Open with prior intimation Consultant’s Note

Has a valid passport

Passport No : T9962618

Validity :25-12-2029

SUNEEL KUMAR .REMALLI

Flat-401, Basera Residency,Plot-46 & 47,NCL Enclave,Pet Basheerabad Kompally,Hyderabad-500067,Telangana State, INDIA

Mobile: +91-768*******/949*******, E-mail: ******.*******@*****.*** EXECUTIVE SUMMARY

A Dynamic professional with around 20 years of experience in Quality Assurance, Testing of transformers & Process engineering, Incoming material inspection, Handling & organizing factory acceptance testing and calibration, third party inspections, Checking of Quality process, planning & implementation of Quality Management System ISO 9001, ISO 14001, ISO 45000, ISO/IEC-17025:2017 (NABL) Systems.

Presently associated with M/s. Raychem RPG Private Limited as Head of Quality Assurance department (HOD)- QA(Process quality, Inspection & Testing, calibration activities, Incoming material Inspections). RRPL was Leading special type Transformer manufacturing company in India

Hands on experience in ALL ROUTINE, TYPE & SPECIAL TESTS of Transformers, CALIBRATION of Instruments, oil testing and development of reporting formats, internal auditor/CO-ORDINATOR of QMS, IMS,ISO/IEC-17025-2017 (NABL) systems & their implementation.

Preparation of Quality Manuals Process Sop’s, check sheets, guidelines and Monitoring its effective implementation

Doing failure analysis and preparation of RCA & CA reports and its presentation to management (MIS)

Organizing Type tests such as Short circuit, Impulse tests and temperature rise tests at independent laboratories and calibration laboratories like KEMA labs,CESI labs, C.P.R.I, ERDA, Aalto university-Finland etc..

Extensive working knowledge of IS / IEC, IEEE, ABNT NBR(Brazil), CBIP manuals.

Obtaining and maintaining INMETRO Certification for Brazil orders and RETIE Certification for Colombia and other ensuring legal requirements like BIS, BEE,UL etc..

Attending management review meetings, Client meetings with detailed quality reports, compliance reports for closure of NCs with suitable CAPA & maintaining proper documentation.

Proficient in Office Automation (MS-Office, ERP) with analytical, timely reporting skills.

A self-motivated effective leader & communicator with distinguished abilities in training, motivating team members to deliver in adverse environment and field conditions. SKILL SET

• MR

• Technical Manager(IS/IEC

17025 -NABL)

• Transformer Testing

• Root Cause Analysis

• ISO Compliance

• Interpersonal Skills

• Problem Solving Skills

• Quality Manager(IS/IEC

17025- NABL)

• Internal Audits(NABL/QMS)

• Report Management

• Training & Quality

• Analytical Skills

• Customer Inspections

• IMS co-ordinator

• Quality in process

• Equipment Maintenance

• Calibrations

• Time Management

• Logical Thinking

ACADEMIC QUALIFICATIONS

POST GRADUATION: MBA in Operations Management

from Indira Gandhi National Open University, New Delhi GRADUATION : B.Tech in Electrical and Electronics Engineering Jawaharlal Nehru Technological University, Hyderabad. 10 +2 :Board of Intermediate, BJT College,keesara,AP, Secondary School Certificate,St.Francis high school, Machilipatnam,AP WORK EXPERIENCE:

Raychem RPG Private Limited Dec-2024 - Till date

Toshiba Transmission & Distribution Systems (India) Private Limited 2014-2024 Vijai Electricals Limited, Hyderabad 2005 – 2013

Growth Path

Nov’05 to Dec’11 In charge – Final inspection & testing (Hyderabad) Dec’11 to Aug ‘13 Branch Head – Quality & Testing & Servicing (Italy & Greece) Sep’13 to Dec’24 Unit manager – QA(PE), inspection & testing (Hyderabad) Since Dec’24 HOD -QA (Process, Incoming, testing & inspections, after sales) PROJECT UNDERTAKEN

Project Name: Comparison of Harmonics between Amorphous Core and CRGO Core Transformer Under No-Linear Load Conditions

Organization Name: Electrical Research and Development Association(ERDA), Vadodara Tenure: September, 2008 to September, 2009

Designation: Project Associate & representative of VEL Description: This project is concluding that amorphous core transformer is better than CRGO core Transformer in Non linear load condition. Roles & Responsibilities and Experience in activities :

HOD of Quality Assurance department (Process, Incoming material(SQA) & Testing)

& Head of Routine, Type testing laboratories of Transformers,

Vendor development activities, organizing audits and development of new vendors

Facilitating the infrastructure and test setups and manpower to the desired sections.

Organizing & Handling domestic as well as overseas customer inspections (FAT)

Conducting and Organizing routine, type & special test to POWER & DISTRIBUTION transformers (oil filled, cast resin &VPI ) as per standards.

Coordinate with customers for factory acceptance tests (FAT), pre-commissioning tests and resolution of customer complaints

RCA & Analyzing the failure by coordinating with Designs/Production/Quality depts. and giving suggestions to take corrective actions.

Quality checks in process & Incoming materials and before dispatch the transformers.

Verification of TS, PO,GTP, etc and identifying the test requirement’s

Giving feedback to Engineering dept. About proto type jobs results and routine test results, declaration of impedance, losses values to Logistics dept.

Handling operational activities of production and servicing

Witnessing the third party inspections as per quality plan.

Updating of MIS reports to management like daily test report, weekly & monthly failure reports/analysis, Corrective & Preventive actions, etc

Ensuring Safety of personnel and testing equipment during testing of transformers.

Giving training to the new employees

Work allotment to Engineers/Trainees based on testing schedule.

In-Process inspection and calibration of instruments in-house/External.

Conducting and reporting of proto type Evaluation.

Investigate & Analysis of quality issues of products and implement corrective & preventive actions (CAPA).

Verification of work closing reports & entering the data in in ERP system (ERP LN6).

Reporting on type tests and special tests requirements units.

Review of all routine test certificates on daily basis.

Monthly circulation of call for calibration and updating of calibration records.

Reporting of testing failure analysis and investigation.

Ensuring the requirements of ISO 9001, ISO/IEC-17025 and ISO 14001, ISO 45000.

Maintaining latest national and international standards IS, IEC, EN, ANSI, ABNT NBR

(brazil)etc.

Preparation and review of weekly, Monthly & quarterly reports and submitting to Management

ISO 9001:2015, 14001,45000 (IMS), ISO/IEC-17025-2017 Records/documentation.

MR & Quality Manager - preparation of manuals,SOPs, Wis

Conducting audits and updating the Outcomes to Management

Internal auditor of ISO/IEC-17025-2017 &QMS

Maintaining & updating of QMS & NABL/ISO records/documents

To conduct QA checks like replication / retesting / inter lab comparison as per the schedule.

monitoring & maintaining the environmental conditions periodically

Conducting intermediate checks on all equipment

Maintaining the man script’s/test certificates as per the procedures and ISO/IEC-17025-2017

Analysis of Customer feedback form

Preparation of Calibration schedule & status.

Ensuring the requirements of ISO 9001-2015.

Involving route cause analysis of process and Cas implementation

Conducting & attending the meeting of MRM.

Updating implementation of the documents & records of ISO-9001:2015, ISO/IEC- 17025-2017, IMS

Roles & Responsibilities as an IMS coordinator & AUDITOR

Organizing & conducting internal audits as per schedule in various dept.

Preparation of action plan of audit.

Ensuring the requirements of ISO 9001-2015, ISO/IEC-17025-2017

QMS & IMS Documents & records verifications as per standard.

Involving the corrective action & risk assessment analysis.

Preparation of internal audit report.

Conducting & attending the meetings of MRM.

MAJOR INSPECTIONS HANDLED

EXPORTS:

WILSON POWER SOLUTIONS -WPS,UK

ENEL (ITALY, BRAZIL,ROMANIA,PERU,CHILE & COLOMBIA )

AVANGRID,DUKE ENERGY(USA)

CEMIG & UTE (BRAZIL).

RIO,CEARA (BRAZIL).

Kenya power & lighting limited (KENYA).

Bangladesh rural electricity board(BREB)

PLP, Endeavour Energy (AUSTRALIA)

Power & Distribution Transformer Limited (UK)

Niger Delta Power Holding Company Of Nigeria Limited. (NIGERIA).

HEDNO (GREECE).

Central Electricity Board (MAURITIUS)

Electricity Company of Ghana Ltd (GHANA)

Star Contraction (SUDAN) etc.

Landis Gyre & Elenia (FINLAND)

ENEL- COLOMBIA

DOMESTIC:

•POWERGRID, NTPC, BHEL, TPL, SIEMENS, L&T.

• APSEB, MSEB, WBSEB, GEB, HARYANA, PEB, NDPL, BEST etc. STRENGTHS

Strong time management skills, friendly and flexible

Highly effective inter-personal and communication skills.

Willingness to do hard work and take up new challenges. PERSONAL PROFILE

Father’s Name : R.Sundara Rao

Date of Birth : 03.07.1984

Marital Status : Married

Languages known : English, Telugu & Hindi

DECLARATION

I hereby declare that the above Mentioned Information is Correct up to My Knowledge and I Bear the Responsibility Of the above Mentioned Particulars. PLACE– PUNE R.SUNEEL KUMAR

Contact this candidate