Qc Inspector Structural
Resume:
BENJAMIN B. REYES JR.
DESIGNATION: SR. QC INSPECTOR
Mobile #: +974-********
EDUCATION AND QUALIFICATIONS:
Bachelor of Science in Mechanical Engineering
Registered Mechanical Engineer, License No.: 0061038
Registered Master Plumber, License No.: 0014172
MME/UPDA- Mechanical Engineer- 23086
ASEAN Engineer - 11030
Senior Welding Inspector CSWIP 3.2.2
TWI Certification LTD. Cert No. 549409
Certified Level II in UT, RT, MT, PT method in
Accordance with American Society for Non- Destructive Testing (ASNT) document SNT/TC/1A.
PMI Technician Certified – Cert No.: M-TR-202305117 PROFESSIONAL AFFILIATIONS:
KEY EXPERIENCES:
More than 21 years of working experience in construction and major turnaround industries both overseas and local employment, that has led to excel in mechanical/ piping supervisory, inspection, testing and increasing responsibilities in various aspects in the field.
Well experienced in Construction and Major Turn Around for LNG, Petrochemical, Oil & Gas and Pipeline.
Knowledgeable on ASME B31.3/ 31.4/ 31.8, AWS D1.1, API 650/1104 and other International Standards.
Well experienced on Supervisory, Line Checking, Inspection & Testing.
Knowledgeable on Pre- Mechanical/ Commissioning activities.
Qualified to handle Cold and Hot tapping activities.
Knowledgeable on Operation and Maintenance for Potable and Sewage Treatment Plant.
Well experienced on inspection requirement of Pumps, Blowers, Control Valves, Tank, Column, Vessel, Reformer and Exchangers.
Knowledgeable on static & rotating equipment final alignment.
Co-ordination with field engineering team for resolving any Mechanical related issues thru Technical Queries.
Proficient in MS Office, Excel, AutoCAD and Rosers. PROFESSIONAL EXPERIENCES:
Company: Qatar Engineering and Construction Co. W.L.L. Period: November 2021 to Present
Position: SR. QC Inspector
Project: NFPS Offshore Compression Complexes Project COMP2
EPC for North Field Production Sustainability Offshore & Pipelines Project
Client: Qatar Energy LNG
Period: November 2020 to October 2021
Position: SR. QC Inspector
Project: WHP12N Jacket Execution for NFPS Project
Client: Qatar Gas
Period: July 2020 to November 2020
Position: SR. QC Inspector
Project: EPIC Wellhead and Temporary Deck in ISND Field- WHJU08C (Phase 5-1A)
Client: Qatar Petroleum
Period: January 2018 to July 2020
Position: QC Inspector
Project: LP Fuel Gas & Pump Upgrade Modification Project
Boiler Feed Water Project
BSTD Installation & Erection (Green House Project)
HOG to NG Pre-Heater Project
Brine to Harbour Project
NCC Filtration-Main Works Project
UTL Bio-3 Reinstatement Project
Service Water Upgrade Project
Spent Caustic Winterization Project
FGP Spent Caustic Project
Client: Qatar Shell GTL Limited
Period: November 2017 to January 2018
Position: QC Inspector
Project: CW Hot-Tapping& Modification Project
Client: Oryx GTL
Period: March 2017 to November 2017
Position: QC Inspector
Project: Drilling Fluids Project
Client: Qatar Shell GTL Limited
Period: January 2017 to March 2017
Position: QC Inspector
Project: Al Khaleej Gas Project Phase 1&2 (AKG1&2) Client: Ras Gas
Period: May 2016 to December 2016
Position: QC Inspector
Project: Industrial Water Management Project
Client: Dolphin Energy Limited
Period: September 2014 to April 2016
Position: QA/QC Flawless Inspector- Block Lead
Project: QSGTL MTA1&2–Turn around Main Mechanical Services Client: Qatar Shell GTL Limited
Period: June 2014 to August 2014
Position: QC Inspector
Project: Flare Minimization Project for Train 3 & 4 Client: Ras Gas
BENJAMIN B. REYES JR.
DESIGNATION: SR. QC INSPECTOR
Page 2 of 3
Period: April 2014 to June 2014
Position: QC Inspector
Project: QAFAC 2014 Major Turn around Project
Client: Qatar Petroleum
Period: December 2013 to April 2014
Position: QC Inspector
Project: Laffan Refinery Diesel Hydro-Treater Project Client: Qatar Gas
Period: August 2013 to November 2013
Position: QC Inspector
Project: Low Nox Reduction Frame 5 GAS Turbine AKG1 Client: Ras Gas
Period: May 2013 to August 2013
Position: QC Inspector
Project: Jetty Boil off Gas Recovery Project
Client: Qatar Gas
Duties and Responsibilities:
Reviewing of QCP’s, ITP’s, Method Statement & NDT procedures.
Inspecting of materials based on MESC code, purchase order, traceability, and physical condition as per MTC/MAR/IRN.
Perform daily surveillance for welding consumables storage, handling and checking the issuance/returned log.
Perform surveillance check for material handling, preservation and issuance to site construction team.
Conduct daily weld audit to ensure the correct consumables and parameters are being followed as per approved WPS.
Perform daily fit-up and weld visual inspection in accordance with latest drawing revisions and project requirements.
Site verification of platforms fit-ups for orientation and dimensional check as per approved IFC drawing prior to start of welding.
Monitoring calibration status of welding machines, inspection tools and Portable Quivers.
Ensure all welders are qualified for tacking & welding as per approved welder matrix.
Assist for Training and Welder qualifications test.
Witness and records running data during procedure qualification.
Responsible for pre and final alignment of rotating equipment
(pumps/ motor) using laser machine.
Assigned on Vessel/Column for demister and trays installation, including welding works with approved WPS and dimensional check as per vendor drawings.
Monitor piping activities such as hot/cold tapping, pre-bolt/final tightening, hydrostatic/pneumatic testing, line walk down and re-instatement.
Responsible for Jacket, structural, piping and tank fabrication.
Responsible for dimensional check from cutting up to rolling of plates, and ensure that peaking and banding of the tanks are within tolerance as per standard before and after the welds.
Responsible for all NDT requirements of tanks such as PT/MT/RT and vacuum box test.
Prepare Flange Protocol /Database for QSGTL-MTA1 & 2.
Prepare ITP for pre-TA and discovery work during TA based on report provided by plant inspector/planner.
Co-ordinate to all Area lead, attending everyday meeting and raise, discuss and solve issues with related to quality.
Responsible for installation/ inspection of valves, piping erection and welding activities.
Responsible for pre-and post inspection of vessel, column, tanks, compressors and exchangers during TA.
Responsible for site verification of cleanliness as per Oxygen requirements using (White/ UV-Black Light) prior to fit-up or flange connection on GOX/ LOX and pumps area.
Review of all NDT documents, Heat treatment charts, MT, PT and perform Radiographic Film Interpretation.
Witnessing Cryogenic Test for Oxygen service line, Circulation test for the pumps, Hydrostatic / Pneumatic test and Pressure Leak test of the system.
Co-ordinate with the client during quality walk through.
Raising of Quality Observation, NCR and CAR.
Preparing Weld and NDT Summary Reports.
Identify and recommend corrective measures in compliance with the pre-set standards and procedures on problem areas and verify proper resolution.
Assist in internal and external quality control audits and prepare required reports.
Preparation of Final Documentation and Dossiers. Company:Sinopec International Petroleum Service Corporation Period: October 2010 to February 2013
Position: QA/QC Inspector
Project: SAUDI ARAMCO, 56" UWIP-4/5 Transfer Line
Replacement.
SAUDI ARAMCO, 16" Ras Tanura Pipeline.
SWCC, Yanbu-Madina Phase 3 Water Transmission
Client: Saudi Aramco
Duties and Responsibilities:
Ensure that all related activities were implemented in accordance with the approved Project Quality Plans (PQP's), Quality Control Procedures (QCP's), Inspection & Test Plans
(ITP's), IFC Drawings & other related International Standards.
Prepare and Review of Test Packages for Pipeline and Plant Piping (Weld history, P&ID marked up & test limits, Weld mapping, NDT, Coating and Bolt Torque Reports).
Prepare documents and raise (RFI) to Project Inspection Division for Material Receiving, Valve Hydro testing, Valve Installation and Bolt Tightening.
Conduct visual inspection of fit-up, orientation, dimension and material specification prior to release for full welding.
Check welding consumables and validates calibration certificates of welding equipment/ancillaries.
Responsible for final visual inspection and endorse NDT of weld joints such as RT, PT, MT & UT.
Responsible for documentation review such as welding history for test packages and daily welding report (DWR).
Issuing Non-Conformance Report (NCR) if material preservation and installations are not complying with the project requirements/ specification.
Attend weekly construction meeting to discuss and solve items concerning quality.
Conduct line checking and prepare punch listing prior to release for testing.
Verify calibration certificate of materials to be used for hydro/pneumatic test such as pressure/temperature gauges, pressure/temperature recorder, test manifold and relief valve.
Witness Hydrostatic test of Pipeline/ Plant Piping and Pneumatic test for all instrument impulse line piping/ tubing.
Witness internal cleaning of Pipeline and spools for Plant Piping after test.
Verify and monitor all activities during re-instatement.
Monitoring of all mechanical/ piping activities during shut down
(Gasket & Flange Face verification prior to Bolt Tightening).
Witness Tie-in activities of New Piping system connected to existing line.
Secure and assist for submission of all necessary quality records for documents control.
Assign for simulation and pre-commissioning of all instruments such as transmitters, flow control valves, shutdown valves, motor operated valves and sampling pumps.
Conduct final punch listing and responsible for closing of the item prior to Mechanical Completion Certificate (MCC). BENJAMIN B. REYES JR.
DESIGNATION: SR. QC INSPECTOR
Page 3 of 3
Responsible for establishing and maintaining a safe and hazard free working environment.
Company: Consolidated Contractors International Company Period: January 2008 to May 2010
Position : QC Inspector / Engineer
Project: Qatar Gas (QGX II Project) LNG Process Train 5
Qatar Gas (QCS 3&4 Project) LNG Process Train 6
Client: Qatar Gas
Duties and Responsibilities:
Prepare schedule of work and supervise erection, installation of spools, instruments and supports to ensure the quality.
Coordinates all work activities to other discipline for efficient work scheduling.
Handled Tie- In of Train 4 and Train 5 of Qatar Gas II Project.
Expedite and Handle requisition of materials such as valve, pipe & fittings to be delivered at site and maintain good preservations.
Review, evaluate and resolve the field design change (FDC) as per data latest revision.
Responsible for Technical Query of some discrepancy encountered at site.
Coordinates with the mechanical groups for flange parallelism of pipe connected to static and rotating equipment.
Conduct line checking and prepare punch list as per isometric latest revision and P&ID prior for hydrostatic/pneumatic test.
Ensure that field changes are incorporated and red line marked up provided prior to pressure test.
Verifying the plumbness, levelness, squareness of the line and ensure the slope if required.
Checking flange connection requirements either manual torque or tensioning.
Ensure that all piping activities comply with the approved drawings, codes, standards and project specifications.
Verify the flow direction, high-pressure side, and preferred pressure end (PPE) for all types of valves using P & ID diagram.
Review test packages and ensure that all NDT requirements, internal cleanliness, and bolt torque reports were completed prior to test.
Witness and verifying of leaks during Hydrostatic/pneumatic testing.
Involve in Join Walk Down with the client for line checking and punch clearing.
Assigned in Pre-Mechanical Commissioning activities such as degreasing, chemical, water & nitrogen flushing, pigging, steam and air blowing.
Assigned for Re-Instatement of the lines after PMC activities.
Coordinates with client regarding System Punch List & Discipline Punch List.
Implement Health, Safety and Environment Procedures. Company: Future Horizons Company
Period: July 2006 to October 2007
Position: QC Inspector / Engineer
Project: Potable and Sewerage Treatment Plant
Duties and Responsibilities:
Supervise Fabrication Division for spools and pipe supports.
Responsible for Fit-Up and welding inspection in accordance with approved WPS.
Ensure the Material Specification and Service Class were implemented in accordance with Project Specification.
Monitor and review the activities of fabrication including welder's qualification.
Identifying the parts to be pre-fabricated at the workshop and the welding jobs to be performed upon assembly.
Verify flange connection requirements either manual torque or tensioning.
Monitoring for final alignment of pumps and motor.
Check the levelness and squareness of the line and verify the slope if required.
Conduct line checking and prepare punch listing prior for testing.
Witness Hydro testing and Pneumatic testing.
Company: Chemitreat Phils Inc.
Period: November 2004 to June 2006
Position: Mechanical Site Engineer
Project: Potable Water Treatment Plant
Duties and Responsibilities:
Prepare schedule of work for monitoring of equipment installation such as pumps, blowers, control valves and other instruments.
Provide drawings with specific details of equipment, support, piping and foundation for fabrication and installation purposes.
Responsible for Technical Query encountered at site.
Oversee execution of works and ensure that applicable safety standards implemented.
Conduct line checking and prepare punch list to avoid error that may occur during start up.
Witness Hydro testing and monitor re-instatement of the line after test.
Company: Muslat Hamad Al-Otaibi Est.
Period: July 2003 to July 2004
Position: Instrumentation Technician
Project: Uthmania & Abqaiq Gas Plant Project
Duties and Responsibilities:
Fabricate and Lay-out temporary support for the existing equipment during shut down.
Full Supervision of all Piping activities, equipment and instruments installation.
Handle fabrication of spools and pipe supports.
Assign for site inspection and expedite all materials to be delivered on time.
Conduct line checking and prepare punch list to avoid error that may occur in the process.
Check the plumbness, levelness and squareness of the line and verify the slope if required.
Ensure that all site activities was carried out in compliance with the standards.
SEMINAR AND TRAININGS:
MAARK Scientific General Trading LLC
Thermo Scientific Niton XRF Spectrum Analyzer
Future Pipe Industries (FPI)
GRVE/ GRE/ GRP Laminations
QSGTL-MTA1 & 2
O2 Awareness Training- Level 1
O2 Knowledge Training- Level 2
Qatar Gas II
Onshore & Common LNG Project
Incident and Injury Free, Coaching Skills Session
Chiyoda Technip Joint Venture (CTJV)
Permit to Work Receiver - ID No.: 0829
Pre Mechanical Completion (PMC) - ID No. 68344
Consolidated Contractors International Company
Job Safety Task Instruction (J.S.T.I.) – Badge No.: 68344 Hydrogen Sulfide (H2S) Safety Training
Fire Prevention Training
Material Handling and Preservation of Materials
Contact this candidate