Operations Manager Management Services

RESUME

Name: AMMAN AMRAIZ

Email : ************@*****.***

Mobile Qatar : +974-******** Mobile Pak: +92-332******* Passport : GG1225992 exp year: JULY 2029

Driving license: Qatar & Pakistan

Language : English -Hindi with Full Professional in speaking, writing &reading. Address : Doha Qatar

VISA STATUS : NOC with Ready to Transfer

Experience : 12 Years _ (Oil & Gas operation & Drilling, Petrochemicals & Hospitality) SUMMARY

Supervise, coordinate and participate in the preventive, corrective and troubleshooting maintenance activities of the plant equipment at the assigned location. Responsible for Plant erection activates through the contractor supervision in respect HSE, working practices, Quality method and execution of the work according to ISO standard & requirements.

Professional Experience:

SOLID CONTROL ENGINEER & FIELD SUPERVISOR

STEP OIL TOOLS FZE (DRILLING RIG) –PAKISTAN DRILLING COMPANY JUNE 2014 –JUNE 2020.

Designing and commissioning of control panels for solid control equipment Monitoring mechanical equipment as well as electrical panels required for efficient operations at rig site.

Drilling waste management services which include Mud recovery services, measurement, testing and running of all drilling and completion fluids associated with mixing and pumping, technical analysis, Specification and practical recommendation for controlling fluid properties.

Maintained fluid properties at sites by testing properties accurately.

Performed routine effluent treatment/transportation operation and maintenance, preventative duties and work in accordance with procedures outlined under the supervision of Operations manager.

Drilling waste management services which include Mud recovery services and agitation

Provide an independent approach to Operational Integrity within drilling and well operations.

Inspect and monitor work areas, examine tools and equipment, provide employee safety. Trainings to prevent, detect, and correct unsafe conditions or violation of procedures by following safety rules.

Prepared composted mail, mixing of building media, bio-enhance addition, daily row-up keeping/filling retort tests.

Operating and regular maintenance of pumps, spinners, and equipment

Supervised all aspects of sampling, monitoring, and testing required to maintain complaints. with Federal. State and Local regulations governing the wastewater treatment process, and storm water and sludge Management.

Have worked on Derrick FHD DE-1000. I have full expertise in maintenance of centrifuges like opening bowl and conveyer for cleaning, Hydraulic oil change, bearing change in yard as well as on site.

Have worked on a Twin Filter Dual Cartridge unit. Used twin filters from 10 microns to 02 microns.

Running sewage treatment, sludge processing, and disposal equipment in wastewater treatment plant to control flow and processing of sewage: Monitors control panels and adjusts valves and gates manually or by remote control to regulate the flow of sewage.

Performed classification of solid waste to decomposable and non-decomposable wastes such as metal, glass and residue of combustion of solid fuels.

Designing and commissioning of control panels for solid control equipment Monitoring mechanical equipment as well as electrical panels required for efficient operations at rig site.

Preparation of electrical and mechanical periodic maintenance plan as well as team member for execution plan

Onsite treatment and utilization to reduce transportation waste and cost.

Rig up and down solids control equipment, decanter centrifuges, Vertical cuttings dryer, augers, pumps, holding tank, hoses, electric Panels, skids, chutes, bypass, etc.

Processed oil-based mud through dryer machines and centrifuges to Check environmental pollution and reduce mud weight significantly.

I have also worked on VERTICAL CUTTING DRYER installed on different sites like OGDCL, MOL, PPL drying OBM cuttings and bringing OOC to 5% and to move Cuttings to Cuttings to Bioremediation site. The recovered fluid after centrifuge transferred to active system.

Operation of screw conveyors (augers), joining of auger sections, Auger greasing and oiling, changing of hanger bearings and end Bearings, fixing of auger shaft and screw, and motor coupling etc.

Fixed speed and variable speed centrifuge operation and maintenance, Inner and outer bearing greasing using grease gun, changing of Grease nipple, freeing of centrifuge when plugged, cutting down of Mud weight, checking of mud flow rate, bowl cleaning, belt Changing and adjustment, changing of bearing, oiling and draining of gearbox and hydraulic chamber, changing of screw and shaft, changing of feed tube etc.

Handling skips for cuttings collection (wet and dry cuttings), Positioning and changing of Skips. Removal of oil from waste pit using oil skimmer and waste pit Evacuation.

Electrical and mechanical rig up and rig down operations at well site. Maintenance and troubleshooting of HI-G I drier, Screw Conveyor, Centrifuge, Seepax, Mud Pump and Centrifugal pump and air compressor.

Maintenance of Seep ax, Gearbox and Centrifugal pump

Operation of Solid Control Equipment (HI-G I drier, Screw Conveyor, Centrifuge, rotating equipment, and Rotary pumps).

Operate centrifuges in series and parallel mode.

Decanter Centrifuges Operation on Solids Removal/Barite Recovery

Flocculation Packages (Dewatering Units)

Perform retort analysis by weight and by volume.

Worked with OMV, MOL, OGDCL, PPL, POL and UEPL

Equipment Safety Audits / Site Visits, Follow safety procedures during tasks.

Rig Surveys, Solids Control Equipment Layout planning’s & Installation. SENIOR MECHANICAL TECHNICIAN

SUEZ INTERNATIONAL (ASGHAL PROJECT) – DOHA QATAR

AUGUST 2020 –JUNE 2022.

Maintain good communication between the Maintenance crew and Operations team. The daily maintenance / shutdown reports of the equipment will be recorded and mailed to Mechanical Supervisor / Mechanical Planner / Mechanical Engineer daily to enter the maintenance management system.

Assures proper installation, preventive maintenance and repair of mechanical equipment and piping systems to ensure their maximum service life and efficiency as well as their optimal utilization Assures proper installation, preventive maintenance and repair of mechanical equipment and piping systems to ensure their maximum service.

Investigate mechanical failures or unexpected maintenance problems.

Provides alternatives when equipment failure is impeding plant operation.

Reviews equipment repair to detect required design changes in cases where abnormal/customized maintenance occurs.

Trouble shooting and maintenance of equipment such as Centrifuges, Loop Compressor, Heat exchangers, Seepax pump, Belt Thickener, Screw Conveyor, Mechanical Screens, gearboxes, bearing.

Blower troubleshooting and repairing of its 'IGV' and Diffusers and its Alignment method with dial gauged & Laser Alignment tool.

Servicing and repairing fixed plant: manufacturing equipment, EOT cranes, roller and belt conveyors, pumps, gearboxes, coupling, Compressor packages., Turbine Packages, Air compressors, pumps -Hydraulics and pneumatics Repairs of marine equipment such as shafts, cylinder.

Very good experience in types of pumps such as Positive displacement pump, Piston pump, Gear pump, non-Positive displacement pump, centrifugal pump, turbine pump, progressive cavity pump

Pumps (including Oil Offloading/Transfer, Water Injection, chemical injection, Vacuum and Fire Pumps.

Experience in maintenance of heavy-duty valves such as Gate valve, ball valve, butterfly valve, plug valve, globe valve, check valve, safety valve.

Experience of Alignment process with new and old installation of all rotating and static equipment with digital and manual tools.

Assists maintenance and operating supervision in troubleshooting problems with critical and less critical machinery to be able to correct equipment issues, provides support in performing root cause analysis.

Prepares permit to work documentation and follows the health and safety requirements such as safe isolation procedures (Lock Out / Tag Out).

HVAC & CHILLER PLANT ENGINEER

NEW TECHNIC TRADING & CONTRACTING AT

HILTON SALWA BEACH RESORT & VILLAS – DOHA QATAR

JULY 2022 –JULY 2024.

Maintenance of Chiller as well as Compressor including PM and CM. Develop an engineering operating strategy that is aligned with the hotel and business strategy.

Ensure in assisting the overall operation of engineering department including labor budget and capital budget

Assigning & updating daily corrective maintenance (CM) & Planned Preventive Maintenance (PPM).

Maintain the Physical assets of plant rooms and preventive maintenance to ensure safety.

Maintain the maintenance of Heat pumps, valves and line used for Cold and hot water for pool.

Maintenance of Refrigerant compressors, Condenser, evaporator, traps, transfer pumps, expansion valve & stop valves.

Attending daily work order calls, making defect reports and Action taken record.

Inspect facilities periodically to determine problems and necessary maintenance.

Prepare weekly maintenance schedules and allocate work to employees.

Contribute to the development of maintenance budget and ensure compliance.

That the quality of machine, equipment, or plant maintenance operations, including those carried out by third parties, is in line with reference standards, ensure all activities are undertaken in compliance with company safety and Health environment and standards, Technical support to all company assets to ensure all assets integrity.

Review and validate all Engineering Documents (Drawing, Data sheet etc.) Provide by vendor and Consultant

Ensure future maintenance activities are proactively planned, prepared, and scheduled with the required level of equipment integrity and reliability within areas of responsibility of Employee.

Ensure maintenance, monitoring and record keeping is carried out on a regular basis in accordance guidelines.

Participate in Safety workshops and value improvement workshops.

Hot water generator, hot water circulation pump inspected and hot water temperature

Inspect Hot water generator, hot water circulation pump inspected and hot water temperature Chilled water exchanger (DCS), chilled water circulating pumps, chilled water pressurization system and chilled water temperature .All water tanks Level and quality maintaining C12, PH, hardness

Provides maintenance, troubleshooting, and repair to commercial chillers and their ancillary equipment motors, pumps, Variable frequency drives, instrumentation and controls associated with both, including tear down and rebuild).

Prepare weekly maintenance schedules and allocate work, performs visual inspections on chillers and ancillary equipment using various.

Contribute to the development of maintenance budget and ensure compliance that the quality of machine, equipment, or plant maintenance operations, including those carried out by third parties, is in line with reference standards.

ENGINEERING TEAM LEADER

HILTON SALWA BEACH RESORT & VILLAS – DOHA QATAR

AUGUST 2024 –PRESENT.

• Lead a team of engineers in the efficient operation and maintenance of hotel facilities, ensuring minimal downtime and optimal guest satisfaction.

• Supervise the repair, maintenance, and troubleshooting of all hotel mechanical, electrical, plumbing (MEP), and HVAC systems.

• Identified energy-saving opportunities and successfully implemented energy-saving programs.

• Enhanced relationships with other departments and guests to improve overall guest experience.

• Handled and monitored contractors to ensure smooth completion of work.

• Develop and maintain production schedules.

• Ensure compliance with local, state, and federal regulations regarding health and safety, building codes, and environmental Policies.

• Conducted regular inspections and assessments of hotel infrastructure to identify potential issues and resolve them proactively.

• Supported the Team in managing preventive and corrective maintenance for all hotel systems.

• Overseeing the maintenance of mechanical, electrical, plumbing, HVAC, and other hotel infrastructure systems.

• Assisted in the daily operations of the engineering department, providing technical expertise and support.

• Oversee all engineering personnel and assign tasks appropriately.

• Ensure that all engineering projects are completed on time and within budget.

• Manage the design, development, and implementation of engineering projects.

• Maintain and troubleshoot equipment.

• Provide leadership and guidance to engineering staff.

• Conduct research and development activities.

• Ensure compliance with safety regulations.

• Monitor and improve the efficiency of engineering processes.

• Identify and resolve engineering-related issues.

• Analyze data and generate reports.

• Prepare and present project proposals.

Academic Qualification:

Bachelors in petroleum engineering

Diploma (DAE) in mechanical engineering

SSC-1 FEDERAL BOARD ISLAMABD

HSSC-II FEDERAL BOARD ISLAMABAD

Certifications & Professional Credentials (Courses)

• H2S/BA GAS Hazard Safety Training- Certificate No. 101******** – Institute of ENERTECH, QATAR

• Basic Fire Fighting Level 1 Training – Certificate No.511******** – Institute of ENERTECH, QATAR

• Work at Heights Training- Certificate No. 524******** – Institute of ENERTECH, QATAR

• Rigging & Slinging Training Certificate Institute of ENERTECH QATAR

• Chemical Handling Training- Certificate No. 524******** – Institute of ENERTECH, QATAR

• Confined Space Entry Training- Certificate No. 532********* – Institute of ENERTECH, QATAR

• H2S GAS Hazard Safety Training- Certificate No. ED170022 – EDCONS Institute of Business & Technology

• Medic First Aid Training – Certificate No. 2021775, BASIC PLUS (CPR, AED) CERTIFICATION, ISLAMABAD, PAKISTAN

• Solid control Training – STEP Oil Tools EST, Pvt. Limited Pakistan.

• Basic Fire Fighting Level 1 Training – Pakistan Petroleum Limited (PPL) Academy, Pakistan.

• LOCK-OUT-TAG-OUT Training from Applus velosi

• Permit to Work and Job Safety Analysis - STEP Oil Tools Est, Pvt. Limited Pakistan as well as ENER Tech Also.

SKILLS:

• Project management

• Engineering operation

• Hospitality and facility

• Equipment troubleshooting

• time management

• HSE compliances and reporting

• Inventory and logistics management

• Team coordination

• AUTOCAD

• Excellent knowledge of MS-office

• Time management

• Project execution

Project History

1. Engineering Team Leader at HILTON SALWA BEACH RESORT AND VILLAS Location: Qatar 2. Mechanical/HVAC engineer (District cooling plant) AT NEW TECHNIC GROUP Client: HILTON Qatar 3. Senior mechanical Technician petrochemical plant AT SUEZ INTERVATIONAL Client: ASGHAL Qatar 4 Solid Control field supervisor & Engineer Drilling Rigs AT STEP OIL TOOLS FZE Client: MOL Pakistan 5 Solid Control field supervisor & Engineer Drilling Rig AT STEP OIL TOOLS FZE Client: OGDCL Pakistan 6 Solid control filed supervisor& Engineer drilling Rig at STEP OIL TOOLS FZE Client: OMV PAKISTAN 7 Solid control filed supervisor drilling Rig at STEP OIL TOOLS FZE Client: UEPL PAKISTAN 8 Solid control filed supervisor drilling Rig at STEP OIL TOOLS FZE Client: OMV PAKISTAN 9 Solid control filed supervisor drilling Rig at STEP OIL TOOLS FZE Client: PPL PAKISTAN 10 Solid control filed supervisor drilling Rig at STEP OIL TOOLS FZE Client: CCDC PAKISTAN 11 Solid control filed supervisor drilling Rig at STEP OIL TOOLS FZE Client: HILONG PAKISTAN 12 Solid control filed supervisor drilling Rig at STEP OIL TOOLS FZE Client: POL PAKISTAN RFERENCE:

Reference can be furnished upon request.

Contact this candidate