Maintenance Technician Construction Project

Resume of

ALAPAG, DIVINO BRIONES

Universal City, Texas, USA 78148

Mobile #: +1-210-***-****

Email address: *************@*****.***

POSITION: HVAC Service Technician

Objective / goal:

To apply my 35 years my overall total works experience for HVAC/R skills, BAS controls, knowledge, proficient, and expertise experience in implementing construction project plans and design in Mechanical works, Electrical woks, architectural and Civil Works, analysis and in design issues of layout HVAC installation project, schedule the facilities preventive maintenance and repair, electrical work, mechanical works, plumbing works, developing Budgets, supervision, staffing, project management, management proficiency, Process Improvement, Tracking Budget Expenses, Self-Development, and Planning. Summary:

• Responsible and hands-on repair works and experience proficient for facilities building automation system control HVAC, construction, installation, perform troubleshooting, diagnostic, analysis, assessing repairs electrical and mechanical, tracing of HVAC schematic diagrams, blueprints and electrical works HVAC system residential and commercial, chillers pumps (CHWP), hot water pump, Balancing and testing of such as setpoint air flow, setpoint temperature of rooms, pressure differential areas, Bio-lab Humidity's and Temperature, cooling tower pumps cooling towel station, maintenance of boiler units, Cold storage rooms, walk-in Freezer storage room, cooling towel station, Ice Machine units, Isolation exhaust fan (IRF), General exhaust fan (GEF), kitchen hood fan, Testing, resolving system trouble, diagnose problems all HVAC/R controls and Building Management System

(BMS) monitoring / control and adjustment setpoints, values, Desigo CC building automation system, Web control building automation system, PLC software, siemens control and Johnson controls REES Monitoring humidity’s, temperature system, pressure, Motor control Centers panel (MCC), Direct Digital Control Panel (DDC), package type AC, Multi split type AC (Chilled-Water and Chilled-Air type) cooled, Single type AC, multi stage AC, VRF units, Roof Top Unit (RTU), Ducting routes, Cooling Tower, Constant Air Volume (CAV), Fan Power Box unit (FPB), Variable Air Volume (VAV) units, Variable Speed Drives (VSD), Variable Frequency Drives (VFD), Manual or Motorize damper FCU units, AH, U units, CRAC unit, Exhaust fan units, Pumps unit, VRF unit, Air-cooled Chillers/water-cooled chillers units, installation & repair work of pneumatic control, diagnose Commercial Air-conditioning units & Industrial units / repair works refrigeration system in Walk in cooler and Walk in freezer unit, reach in cooler, units, Compact Freezer unit, Blast Freezer, locating refrigerant leaks in pressures low and high side, diagnose electrical wiring, cooling tower chilled-water flow pressure. Troubleshoot, and replacement correctly major component parts sizes such as (compressor, evaporator, condenser, expansion valve), refrigeration and air-conditioning system.

• Responsible and hands-on repair works and hands-on repairs for the working with all vendors for upkeeping and the pushing availability of the equipment for the company or stake holder, executing audit of facilities, services work implementation, maintenance of Lab equipment and parts of infrastructure development, including performing inventory management, record keeping, Electronic, electrical and Mechanical work, FDA protocol, Environment health and Safety (EHS), Occupational Safety and Health Administration (OHSA).

• Responsible and hands-on repair works experience and remotely control HVAC several location/buildings, analyze and repair malfunction of electrical related problem (HV/LV), repair of fan motors such as dirt (belts and bearing condition), adjust setpoint values, with hand on Terminal Equipment Controller Box (TEC).

• Responsible and hands-on repair works and experience proficient for repairing of mechanical HVAC controls (BAS), like motorize and manual dampers, automation temperature rooms, fire alarm system, air flow velocity, motor rpm, tightness of belt type motors, static pressure of duct, air filters maintenance periodic, supply/return diffusers, 3 way /2-way actuator valves, strainer valves, FCU units, AHU units pressure gauges, water leakage in fittings.

• Responsible and hands-on repair works and experience proficient in medical office buildings and hospital with medical equipment (oxygen, nitrogen) gas and vacuum gas, hospital beds, maintaining pressure and temperature of isolation room/cleanroom, operating room equipment’s (OR), automatic advance doors (sliding and swing), maintaining make adjustment moving part equipment weekly and replace defective part OR surgery lighting fixtures, sensor temperature as FDA protocol guidance.

• Responsible and hands-on repair works and experience proficient for checking vibration condition due shock spring, check shaft bearing clearance play if need to repair or replace, check level of lube oil, check sight glass of refrigerant system, repair refrigerant leakage, do copper pipes welding work if necessary; make refrigerant recovery, follow vacuum procedure before charge nitrogen for test leakages and charge refrigerant.

• Responsible and hands-on repair works and experience proficient for preventive maintenance as follows Air Cooled, DX Compressor & Condenser, Centrifugal HVAC Fans, Variable-Frequency Motor Controllers, Self-Contained Steam Humidifiers, Humidifier, Direct-Steam-Injection, Refrigerated Dryer Systems for Gen. Serv. Compressed-Air, Packaged Reciprocating Air Compressors.

• Responsible and hands-on repair works and experience proficient with Compressed-Air, Boiler Feed water Pumps, Base-Mounted Centrifugal Pumps, Shell-Type, Steam-to-Water HX, walk in freezers, walk in coolers, Walk in chillers. Knowledge of Microsoft Windows, Excel, Word, Power-Point, and Outlook.

• Responsible and hands-on repair works and experience proficient perform mechanical HVAC design works, completes necessary document record with of Microsoft windows, excel, word, power-point, and outlook, and electronic communication in a thorough, accurate and timely manner of Computerize management maintenance system (CMMS) work order Upkeep, Site FM work order, Automation Building System (BAS) such as Design software system, Web-Control Logic Automation building programing application, auto cad software, oracle software, SAP software, and active per monitor of actively of command center panel to all buildings centralize auto Fire Alarm System..

• Certified in Electrical Building License, EFA 608 certification, EPA Certification OB Technician, Refrigeration & Air-conditioning, Class B+, Refrigeration Mechanic, and a Registered Mechanical Engineer.

Skills:

1. Microsoft Windows application

2. Inventory and records file

3. Electronic, electrical and Mechanical work

4. EHS

5. OSHA

6. Power point application

7. Excel file application

8. Word office application

9. AutoCAD

10. Oracle software application

11. Computerize Management Maintenance soft (CMMS) 12. Insight FM software application, BAS HVAC control 13. EPAC software

14. Upkeep software application

15. Rees program for temperatures, humidities and pressure software application 16. Insight HVAC control Building Automation system software application 17. Application Desigo CC HVAC Building Automation system software by training on Siemens 18. Web Control HVAC Building Automation system software 19. Controller Interface Software (CIS), Building technology Inc. by training on Siemens 20. Control Interface Software by Siemen Building technology. Skills & Qualifications

1. Responsible and hands-on repairing for HVAC/R design, construction project, implementation of construction site installation, estimation cost take off, troubleshooting, diagnostic, analysis, repairs, HVAC/R automation control system (Distech Controls, Siemens, or other BACnet Control Systems), Building air flow balance, replacement major and minor component parts, repair mechanical /electrical HVAC/R schematic diagrams, blueprints and electrical works HVAC system residential and commercial, chillers pumps (CHWPs), motor pumps cooling towel station, boiler units, package type AC, Multi split type AC (Chilled-Water and Refrigerant type), Single type AC, multi stage AC, VRF units, Roof Top Unit (RTU), Stand freezer, Walkin cooler rooms, Walkin Freezer room, Ice Machine units, Isolation exhaust fan (IRF) and cleanroom labs. 2. Responsible and hands-on repairing for maintaining and repair works, general exhaust fan (GEF), kitchen hood fan, Testing and diagnose problems all HVAC controls and Building Management System (BMS), REES Monitoring pressures, humidities and temperature system, Motor control Centers panel (MCC), Direct Digital Control Panel (DDC). 3. Responsible and hands-on repair works for maintaining and repair works, as follows Air Cooled, DX Compressor & Condenser, Centrifugal HVAC Fans, Variable-Frequency Motor Controllers, Self- Contained Steam, Humidifiers unit, Direct-Steam-Injection, Refrigerated Dryer Systems for Gen. Serv. Compressed-Air, Packaged Reciprocating Air Compressors, using refrigerant: R22, R404, R410A, R143A and ammonia refrigerant, Compressed-Air, Boiler Feed water Pumps, Base-Mounted Centrifugal Pumps, Shell-Type, Steam-to-Water HX, Walkin freezers, walk in coolers, Walk in chillers.

4. Responsible and hands-on repair works and hands-on performing mechanical HVAC design works, Computerize management maintenance system (CMMS) work order, Site FM work, Rees software for pressure, temperature and humidity Desigo CC software system and web-control system, capacity handle 3-ton, 5-ton, 15-ton, 20-ton, 160-ton, 200-ton, 750 ton up to 4500-ton centrifugal chilled water and multi stages AHU unit and multistage centrifugal pump chillers. 5. Responsible and hands-on repairing works, supervising vendor projects and hands-on the operator, preventive maintenance of industrial equipment such as heater, cooling tower, pump motors, FPB unit, VAV Box, CAV box, RTU unit, ice manufacturing plant construction, compact disk freezer, ammonia ice freeze, and hydraulic refrigeration ice freezer, storage freezer for export seafood product and was responsible for an effective and efficient execution of mechanical work installation on ice plant project site and shall also be in-charge of inventory management that include estimation and take off materials.

6. Responsible and hands-on repair works and hands-on knowledgeable mechanical project, electrical project including implementation project plan and civil project plan to HVAC design work and planning, equipment selection /design, AutoCAD, Airport project, medium building rise, high rise building, Hotel building, Hospital Building, school building Theater building, Oil and gas plant HVAC system, water treatment plant and Sub-power station. License and Certification:

1. Texas Department of Licensing and Regulation (TDLR) Apprentice Electrician

License #: 601913 / Expire date: January 30, 2024

2. Texas Department of Licensing and Regulation (TDLR) Air-conditioning and Refrigeration Technician (ACR) License #: 126573 / Expire date: January 27, 2024

3. Electrical Building License – City of San Antonio, Texas License # MT-927837

April 5, 2018

4. EPA CERTIFICATION

OB Technician – Type I

License # V83F549002FA0FD1

Date: February 4, 2017

5. EPA 608 CERTIFICATION

Date: January 2017

6. Trade:

Refrigeration & Air-conditioning, Class B+,

Refrigeration Mechanic

License # 9002149

February 9, 1990

7. Registered Mechanical Engineer (RME)

Philippine Regulation Commission (PRC), Manila Philippines Broad Rating: 79.4 %, License Number: 0036191

Date issue license: April 27, 1988

Expired date: Dec. 21, 2025

8. Completion of Refrigeration and Air-conditioning of Course November 10, 1988

9. Achievement / Course:

Eagle Scout / Citizen Scout of the Philippines,

October 1980

10. Certificate Completion of Course

HVAC Fundamentals and BMS Controls

Date: July 11, 2020

11. Certificate Completion of Training Course

ST 101 Introduction to Desigo CC, BAS/HVAC control Siemens Building Technology, BT University

Date: April 08, 2022

12. Certificate Completion of Training Course

ST 9202 Desigo CC Workstation I MP 5.0, BAS/HVAC control Siemens Building Technology, BT University

Date: May 24, 25 & May 26, 2022

Education:

• Holy Angel University, Refrigeration and Air – Conditioning Course (RAC),1988

• Holy Angel University, Bachelor of Science in Mechanical Engineering (B.S.M.E), Apr1987

• Far Eastern University (F.E.U.), First Year Engineering, 1982 to 1983

• Holy Angel University, High School, Mar 1982

• Gueco Elementary School, Apr 1978

Experience:

Biobridge Global Company, San Antonio, Texas 78148 Oct 2019 – Present Facilities (HVAC/R) Tech IV

• To perform preventive maintenance and corrective repairs using trade skills such as carpentry, plumbing, electrical, painting, roofing, heating, and cooling system expertise.

• To inspects, identify cause of failure, preventing failure, repair of major parts of refrigeration and Air-conditioning unit, installation & repair work of pneumatic control, building systems including fire alarms systems, HVACR, and plumbing to ensure operation of equipment is within design capabilities and achieves prescribed environmental conditions such replace and repair of thermostat controls, Controller system, VAV box, CAV box, FPB Box, clean room, exhaust fans, AHU units, RTU unit Cooling tower, Boiler unit, Exhaust fan units, several walk in cooler, and walk in freezer units including ice machine units, VRF units, package unit and several humidifiers unit;

• To remotely monitor chiller or other HVAC type systems to ensure proper operation and trouble shoots immediately to diagnose problem and check suites and rooms other facilities.

• To planned and ad hoc maintenance work assignments requiring the skill and direction of several engineering, mechanical, maintenance trades, active perform monitor of Engineering Management system command to all different location & building automation system, centralize auto Fire Alarm System, estimates time and materials needed to complete repairs, orders materials and supplies necessary to complete all tasks.

• To contact certified contracted vendors as needed, oversees performance / note deficiencies of service contractors and recommendation changes as necessary.

• To oversee monthly or periodic inspection of buildings systems like HVAC, electrical distribution, structural, vertical transportation, roofs, parapets, gutters, lenders, parking area, drainage, ramps, and approaches, irrigation, and fire / life safety, water treatment, UPS and PDU systems, HVAC/R controls and plumbing, verify maintenance of mechanical equipment rooms to ensure clean and safe condition.

• Experience in Building Automation System (BAS), Computerized Maintenance Management System

(CMMS) software for work order, design system, web control logic system, & Siemens Insight software application and Desigo CC software application program for HVAC centralize system, Site FM program work order, Hand on Microsoft windows for excel file, Microsoft word, edit drawing file, power point, Master Control program, REES program application (temperature, humidity and pressure) monitor of elevator system, electrical work system of building, All room TV system.

• Experience in testing and diagnose problems all HVAC controls centralize, Multi split type AC (Chilled- Water cooled and Chiller-air cooled), cooling tower, Single type AC, Ducting routes / inspection regularly of Chillers, boilers, refrigerant pressures low and high side, electrical wiring, cooling tower chilled-water flow pressure, Ampere current motors reading metering, refrigerant leakage test to resolved problem and issue.

• Experience in PLC analyze and repair malfunction of electrical related problem (high voltage, Low voltage, 24 volts & 12 volts current; motor amperes reading, check the condition of fan motors if any obstruction materials or dirt (belts and bearing condition), check and Testing and implement commissioning Testing and Balancing Air volume and Temperature certain degrees design of HVAC requirement Blueprint plans.

Methodist Stone Oak Hospital, San Antonio, Texas 78258 Feb 2017 – Oct 2019 Building Maintenance HVAC/R Tech IV

• Responsible hospital building rooms inside and outside preventive maintenance, monitoring, replacement parts, repair works hospital building and all equipment such as cooling towers, Chiller units, chiller pumps return and supply pumps, AHU units, make up air unit, Domestic Cold and hot water system, boiler units, water softener, cold storage and walking freezer units, Refrigerant type refrigeration, FCU units, water heaters system, humidifiers unit, auto / manual damper, volume dampers, smoke damper, smoke sensor unit, exhaust fans, Fire alarm system, ICU equipment’s, Operating room (OR unit), Sterilizing process equipment, Kitchen equipment, supply / return / exhaust duct system, hospital entire plumbing line system, sewage line system, Fire Alarm system, Automatic single / double doors and sprinklers.

• Experience in Building Automation System (BAS) HVAC insight application, Computerized Maintenance Management System (CMMS) software for work order, Insight software HVAC centralize system, Site FM program work order, Hand on Microsoft, excel file, Microsoft word, edit drawing file, monitor of elevator system, electrical work system of building, All room TV system.

• Experience in testing and diagnose problems all HVACR controls centralizes, Multi split type AC

(Chilled-Water and Refrigerant type), Single type AC, Ducting routes, Chillers, refrigerant pressures low and high side, electrical wiring, cooling tower chilled-water flow pressure, Ampere current motors reading metering, refrigerant leakage test.

• Experience in PLC analyze and repair malfunction of electrical related problem (high voltage, Low voltage, 24 volts & 12 volts current; motor amperes reading, check the condition of fan motors if any obstruction materials or dirt (belts and bearing condition), check and close any open wires and unsealed caps, see to it terminals and screws are tights and sealed properly.

• Analyze and repair malfunction of mechanical HVACR controls, like motorize and manual dampers, automation temperature rooms, fire alarm system, check air speed velocity, motor rpm, tightness of belt type motors, air filters maintenance periodic, supply / return diffusers, 3 way or 2 way actuator valves, strainer valves, AHU units pressure gage if available in loop system, water leakage in fittings, clogging water in the drain pan and pipes line clogging dirt, sewage system, motor bearing life span, checking vibration condition due shock spring, check shaft bearing clearance play if need to repair or replace, check level of lube oil, check sight glass of refrigerant in system. AL ARRAB CONTRACTING COMPANY (A.C.C.), Saudi Arabia, KSA Jan 2013 – July 2016 Lead Mechanical QA QC Engineer (MEP IT works)

• Responsible for all sub-contractor inspections / reviews, inspection of approval deliveries materials in-site and approval mechanical installation works (HVAC/R, Elevator, piping line, Escalators, Walkelator, Solar system, Generators, Plumbing, Sewage plant, Cooling Tower, Airport runway facilities both mechanical & electrical work, Cabling works, Power Station,) of all buildings (Madinah Hotel Building Project; Saudi Airline Catering Building; Passenger Terminal Building, Substation building, Water treatment plant, Cooling Tower plant, Power Plant Building, Hajj Building, Masjid Building, Bachelor House, Cantonment, Building, Ministry of Hajj Building, Power Sub-station, etc.) and external mechanical works in whole Madinah International Airport site work project;

• Mechanical works monitor and inspection which includes, Drainage system works, plumbing works, HVAC system, escalator, baggage handling conveyor system, elevator, Firefighting system works, fuel line, pipeline, cooling plant station, and sewage treatment plant.

• Monitor all sub-constructors / construction in implementation of approved drawing and method of statement in every specific work and material use.

• Check the Quality Control of the project in relation to the inspection of mechanical work in all buildings as per approved materials & shop.

• Review the inspection prepared by Sub-contractor, QC construction before final approval of works and projects inspected upon work completion, make sure all items / works inspected are operationally based on their respective function.

• Monitor and Coordination for quality control, site engineer foreman, sub-contractor, and execution of the project work.

• Mechanical works monitor and inspection which includes, Drainage system works, plumbing works, HVAC system, conveyor, escalator, baggage handling conveyor system, elevator, Firefighting system works, fuel line, pipeline, cooling plant station, and sewage treatment plant.

• Testing and diagnose problems all HVAC/R controls centralize, Program Logic Control (PLC) system, Multi split type AC (Chilled-Water and Refrigerant type), Single type AC, Ducting routes, Chillers, refrigerant pressures low and high side, electrical wiring, cooling tower chilled-water flow pressure, Ampere current motors reading metering, refrigerant leakage test.

• Analyze and repair malfunction of electrical related problem (high voltage, Low voltage, 24 volts & 12 volts current; motor amperes reading, check the condition of fan motors if any obstruction materials or dirt (belts and bearing condition), check and close any open wires and unsealed caps, see to it terminals and screws are tights and sealed properly.

• Analyze and repair malfunction of mechanical HVAC/R controls, like motorize and manual dampers, automation temperature rooms, fire alarm system, check air speed velocity, motor rpm, tightness of belt type motors, air filters maintenance periodic, supply / return diffusers, 3 way or 2 way actuator valves, strainer valves, AHU units pressure gage if available in loop system, water leakage in fittings, clogging water in the drain pan and pipes line clogging dirt, motor bearing life span, checking vibration condition due shock spring, check shaft bearing clearance play if need to repair or replace, check level of lube oil, check sight glass of refrigerant in system; CONTINENTAL COOLING CO. (W.L.L.), Doha, Qatar Jun 2010– Aug 2012 PROJECT (HVAC) MANAGER

• New Project site: Oil and Gas, Halul Island, Qatar

• New Project site: Al Shouik Mosque, HVAC (MEP) Project

• MEP Project Position: Mechanical Engineer/PROJECT (HVAC) MANAGER

• Past: Project: New Doha International Airport, Doha, Qatar HVAC, CP-19 Project: (June 28, 2011, to 4 April 2012)

• Past Project Site (Hospital): Hamad Medical Center Project: (December 30, 2011, to June 27, 2011)

• Past Project: New Doha International Airport,

HVAC Project: (June 13, 2010, to December 29, 2011)

• Responsible for directing operation of site work project.

• Assist the consultant in implementation of approved submittal drawing & materials:

• Check the Quality Control of the project in relation to the approved materials & shop.

• Prepare inspection request to quality control and projects inspected upon work completion, make sure all items / works inspected are operationally based on their respective function.

• Coordination for quality control, site engineer foreman and execution of the project work.

• Prepare as built drawing base on the final inspection, testing and commissioning and O &M preparation.

• Responsible for implementing the works as described in the tender documents and making list for materials jobs and equipment’s.

• Check the work of all staff to see that they provided the necessary work accomplishment needed.

• Monitor and check the performance of the works on site and verify the conformity with the standards.

• Mechanical works which includes HVAC system, ducting system, chilled - water Package units exhaust and centralized air-conditioning system.

• Prepare submittal materials for approval, method of statement and prepare drawing design. AL LATIFIA CONTRACTING AND TRADING, Saudi Arabia KSA Sept 2009 - Mar2010 HVAC Engineer

• Capacity handle 750 ton up to 4500-ton centrifugal chilled water.

• Quality Control of the project in relation to the approved materials & shop.

• Prepare inspection request to quality control and projects inspected upon work completion, make sure all items / works inspected are operationally based on their respective function.

• Coordination for quality control, site engineer foreman and execution of the project work.

• Prepare as built drawing base on the final inspection, testing and commissioning and O &M preparation.

• Responsible for implementing the works as described in the tender documents and making list for materials jobs and equipment.

• Supervising the work of the subcontractors and verifying the conformity with the standards.

• Mechanical works which includes HVAC system, Package units exhaust and centralized air- conditioning system.

• Completed plumbing system and firefighting system.

• Devises sampling procedures and designs and develops forms and instructions for recording, evaluating, and reporting quality and reliability data.

• Establishes program to evaluate precision and accuracy of production equipment and testing, measurement, and analytical equipment and facilities.

• Compiles and writes training material and conducts training sessions on quality control activities.

• Develops and implements methods and procedures for disposition of discrepant material and devises methods to assess cost and responsibility.

• Directs workers engaged in measuring and testing product and tabulating data concerning materials, product, or process quality and reliability.

• Plans and directs activities concerned with development, application, and maintenance of quality standards for industrial processes, materials, and products: Develops and initiates standards and methods for inspection, testing, and evaluation, utilizing knowledge in engineering fields such as mechanical.

SKU Air - Conditioning and Industrial Service, Inc, & Totaline Air- conditioning parts Supply April 2006-April 2009 Service (HVAC) Manager and Totaline Head

• Accredited Installer for Carrier, Koppel, Hitachi, Kolin, MIT-Air, Samsung, LG Electronics, National Panasonic, Sanyo, York, American Home, Markes and supply all kind refrigeration & air-conditioning parts/ supply), Mechanical Contractor for HVAC System. (Design, Supply, Installation, and other Mechanical Services for Commercial & Industrial establishment.

• Responsible for planning activities and prepares the schedule for bill of materials as well as work schedule for labor cost budget and set up the target completion date of each project.

• Monitor the materials budget and labor cost budget are duly monitored avoid excess purchases of materials and the work schedule is always followed.

• Coordinate with the leadman / foreman in seeing to it that all duties and responsibilities of workers

(Aircon Installer/Technician, Duct man, helpers, etc.) at site and support people are properly carried out.

• Ensure that all relevant project documents and information, especially scope of work and supply and excluded items are available to him.

• Ensure that all imported equipment is ordered to effect delivery without delay.

• Ensure that all compliance with the design will be achieved with minimal revisions. Should call the attention of all concerned and be able to propose and implement the best possible solution to the problems at hand.

• Ensure that all materials used at the site are those that will meet the specification relative to the project requirements and are available as they need it.

• Ensure that attends regular jobsite coordination meeting to be updated with the plans.

• Regularly review the progress of work taking cognizance of project accomplishments and to coordinate necessary action to correct any slippage and / or delays noted.

• Should not perform the installation and implementation of change orders without sufficient acknowledgement of the owner or the representative, and appropriate contracts for change orders are signed prior to change in works.

• Submits periodic report to the people concerned to include: a) Contracts for all change of orders that would be needed by the accounting department. b) Minutes of the regular job site meeting.

• Conduct periodic site meetings with the workers to develop teamwork and identify areas for improvement and acting on problems presented. Ensure that the workers understand their specific duties and responsibilities on site.

• To report to the president office, all matters affecting installation and project implementation such as irregularities and malpractices and the action taken.

• Ensure that design engineering conducts an accurate survey on the projects site to avoid frequent problem of having to revise the design due to unnoticed heat load, or beams that block the pipelines, etc.

• Coordinates with the Account Receivable staff regarding problems relayed by the customers and have such problems duly acted in the shortest possible time so that collection would not be delayed.

• Coordinate timely the purchase of the materials, and/or local equipment needed in the project and see to it that these are duly delivered at site based on the pre-determined schedule.

• Designed HVAC systems for office buildings, Preventive maintenance works building facilities, spa, hotels, restaurants, hospitals, schools, condominium, and stores. Created detailed drawings and related documents for bids, coordinating with project engineers and architects. Presented alternative designs

Contact this candidate