Lab Technician Inventory Management
Resume:
Joel Huynh
**********@*****.***
San Jose, CA 95118
Joel is an exceptional Lab Technician with over 15 years of hands-on experience in PCBA and system-level assembly, specializing in soldering and rework of high-complexity circuit boards and components. His strong expertise in troubleshooting and debugging electronic systems using oscilloscopes, multimeters, and logic analyzers is complemented by a deep understanding of electronic components, including capacitors, resistors, MOSFETs, and diodes. Joel's extensive background includes working with renowned companies like Google, Intel, Cisco, and Flextronics, where he demonstrated his ability to perform precise rework on high pin count components and ensure compliance with IPC and ISO standards. His skills in test setup preparation, lab maintenance, and inventory management make him an ideal candidate to ensure the seamless operation of your lab. With his proven track record in delivering quality and efficiency, Joel is ready to contribute to your team's success in delivering high-performing electronic assemblies.
Joel is local candidate based in San Jose, CA and is available immediately to work onsite in Santa Clara, CA 95054 from day one.
Operates automatic and hand assembly equipment. (Torque drivers, wire strippers, crimping tools. Etc.)
Assemble PCBA’s into metal enclosures; install wire harnesses, cable ties, etc. per work instruction.
Read and follow instructions correctly.
Accountable to assure that equipment and area is clean.
Escalates issues to Manager.
Read and understands Omega Quality Management System (QMS)
Read and understands Omega Quality Policy
Fill out any appropriate forms or records as required
Read and understands current IPC-610 acceptability criteria
SUMMARY:
Proficient in PCBA assembly and system-level assembly processes.
Proficient in soldering and desoldering SMD and through-hole components on high-complexity boards.
Experienced in board rework, including handling high pin count components.
Strong understanding of electronics components such as capacitors, resistors, MOSFETs, and diodes.
Skilled in using testing equipment like oscilloscopes, Multimeters, power supplies, and signal generators.
Experienced in cabling and wiring at system levels.
Adept at troubleshooting complex hardware components, conducting root cause analysis, and collaborating.
Hands-on experience in PCBA assembly and system-level assembly.
Knowledgeable in test setup preparation, including configuring test environments for reliable results.
Familiar with cabling and wiring at the system level.
Adept at lab maintenance and inventory management, ensuring accurate tracking of equipment and supplies.
SKILLS:
Electronics Expertise: Strong understanding of electronic components such as capacitors, resistors, MOSFETs, diodes, and transformers.
Soldering & Rework: Proficient in soldering and desoldering SMD and through-hole components, including high-complexity boards with 0201, 01005, 01002,0401,0603,0805,1005 ICs, QFPs, QFNs, and BGAs.
Testing & Debugging: Skilled in using oscilloscopes, Multimeters, power supplies, signal generators, and logic analysers for testing and troubleshooting electronic systems.
PCBA & System-Level Assembly: Extensive experience in PCBA assembly, system-level assembly, and rework of RMA boards.
Cabling & Wiring: Adept at cabling and wiring tasks at system levels for ensuring functionality and assembly quality.
Standards & Compliance: Knowledgeable in ISO 9002 standards and IPC Standards 610-B for electronics assembly and rework Testing ICT HP-3070
Lab Maintenance: Experienced in maintaining lab inventory, preparing test setups, and ensuring efficient operations.
Blueprints & Diagrams: Proficient in reading and interpreting technical diagrams and blueprints to ensure compliance with engineering specifications.
WORK EXPERIENCES:
A Steel Flash Fremont, CA 03/2024 – Present
Rework Technician, Testing
Performed rework and repair operations associated with printed circuit boards while keeping quality and efficiencies at the highest priority.
Followed production instructions to ensure and maintain quality and quantity with a strong sense of accountability and high standards.
Demonstrated in-depth knowledge of electronic components (capacitors, resistors, MOSFETs, diodes) during rework and troubleshooting.
Operated precision tools and equipment to perform accurate dimensions without error.
Validate of complex Hardware system and specialized in soldering and desoldering of SMD components on high-complexity circuit boards, including size 0201, 01005,01002,0403,0603,0805,1005 and high pin count components.
Removed and replace part size 0201, 01005, and jumper wire follow rework instruction.
Remove/replace/solder all kind of SMT components (ICs, QFPs, QFNs, BGAs, 0402,0201,01005 packet),anh I set up ICT Test # HP-3070 and set up and test FCT test .
Demonstrated success in reducing production costs and improving yield by implementing process changes and validating new methodologies.
Operates automatic and hand assembly equipment. (Torque drivers, wire strippers, crimping tools. Etc.)
Assemble PCBA’s into metal enclosures; install wire harnesses, cable ties, etc. per work instruction.
Read and follow instructions correctly.
Accountable to assure that equipment and area is clean.
Escalates issues to Manager.
Read and understands Omega Quality Management System (QMS)
Read and understands Omega Quality Policy
Fill out any appropriate forms or records as required
Read and understands current IPC-610 acceptability criteria.
Comtech Santa Clara, CA 01/2022 – 11//2023
Rework Technician, Testing
Repaired electrical systems, including wiring and components such as transformers, capacitors, and circuit breakers.
Provided comprehensive validation lab support, setups, while ensuring correct bench-top platform configurations, and maintaining updated inventory status through diligent PCB rework and debugging.
Troubleshoot problems with equipment and making repairs as needed
Maintained equipment by performing regular maintenance checks, replacing parts, or performing repairs. Validate of complex Hardware system and specialized in soldering and desoldering of SMD components on high-complexity circuit boards, including size 0201, 01005,01002,0403,0603,0805,1005 and high pin count components.
Removed and replace part size 0201, 01005, and jumper wire follow rework instruction.
Remove/replace/solder all kind of SMT components (ICs, QFPs, QFNs, BGAs, 0402,0201,01005 packet).
Demonstrated success in reducing production costs and improving yield by implementing process changes and validating new methodologies.
I have experience FCT test and ICT test manually HP-3070 Lock and unlock fixtures .
Operates automatic and hand assembly equipment. (Torque drivers, wire strippers, crimping tools. Etc.)
Assemble PCBA’s into metal enclosures; install wire harnesses, cable ties, etc. per work instruction.
Read and follow instructions correctly.
Accountable to assure that equipment and area is clean.
Escalates issues to Manager.
Read and understands Omega Quality Management System (QMS)
Read and understands Omega Quality Policy
Fill out any appropriate forms or records as required
Read and understands current IPC-610 acceptabilit
Google Mountain View, CA 04/2021 – 11-2022
Rework Technician
Conducted information and communication technology testing
Expertly troubleshooted complex electronic systems.
Debugged, and tested hardware and Validation / Verification of new product performance.
Managed inventory of components used for reworks. Validate of complex Hardware system and specialized in soldering and desoldering of SMD components on high-complexity circuit boards, including size 0201, 01005,01002,0403,0603,0805,1005 and high pin count components.
Removed and replace part size 0201, 01005, and jumper wire follow rework instruction.
Remove/replace/solder all kind of SMT components (ICs, QFPs, QFNs, BGAs, 0402,0201,01005 packet).
Demonstrated success in reducing production costs and improving yield by implementing process changes and validating new methodologies.
Operates automatic and hand assembly equipment. (Torque drivers, wire strippers, crimping tools. Etc.)
Assemble PCBA’s into metal enclosures; install wire harnesses, cable ties, etc. per work instruction.
Read and follow instructions correctly.
Accountable to assure that equipment and area is clean.
Escalates issues to Manager.
Read and understands Omega Quality Management System (QMS)
Read and understands Omega Quality Policy
Fill out any appropriate forms or records as required
Read and understands current IPC-610 acceptability criteria
Cisco Systems San Jose, CA 11/2020– 03/2021
RMA Debug/Rework Technician /Tester
Effectively reworked and debugging complex electronic boards
Conducted thorough testing of Return Merchandise Authorization boards
Contributed to enhancing processes and implementing efficient debugging and rework strategies
Involved in all aspects of the coding process including writing specifications, design documents, source code, functional tests, performing code reviews, unit tests, functional tests, and validation. Validate of complex Hardware system and specialized in soldering and desoldering of SMD components on high-complexity circuit boards, including size 0201, 01005,01002,0403,0603,0805,1005 and high pin count components.
Removed and replace part size 0201, 01005, and jumper wire follow rework instruction.
Remove/replace/solder all kind of SMT components (ICs, QFPs, QFNs, BGAs, 0402,0201,01005 packet).
Demonstrated success in reducing production costs and improving yield by implementing process changes and validating new methodologies.
Intel Santa Clara, CA 01/2016-5/2020
RMA Test Technician / Rework / Touch Up
Rework PCB boards
Rework, debug, and test RMA boards
Set up systems tests.
Validating test cases along with failure analysis to isolating issues.
Repair and replace appropriate components.
Operates automatic and hand assembly equipment. (Torque drivers, wire strippers, crimping tools. Etc.)
Assemble PCBA’s into metal enclosures; install wire harnesses, cable ties, etc. per work instruction.
Read and follow instructions correctly.
Accountable to assure that equipment and area is clean.
Escalates issues to Manager.
Read and understands Omega Quality Management System (QMS)
Read and understands Omega Quality Policy
Fill out any appropriate forms or records as required
Read and understands current IPC-610 acceptability criteria
SMTC San Jose, CA 04/2010 – 11/2015
Test Technician / Rework / Touch Up
Managed PCBA assembly and system-level assembly, maintaining high quality and precision.
Maintained lab inventory and conducted regular maintenance to ensure the functionality of all equipment.
Test power supply boards
Rework PCB boards, test ICT, debug
Rework RMA board returns
Set up all unit systems tests.
Repair and replace appropriate components Validate of complex Hardware system and specialized in soldering and desoldering of SMD components on high-complexity circuit boards, including size 0201, 01005,01002,0403,0603,0805,1005 and high pin count components.
Removed and replace part size 0201, 01005, and jumper wire follow rework instruction.
Remove/replace/solder all kind of SMT components (ICs, QFPs, QFNs, BGAs, 0402,0201,01005 packet).
Demonstrated success in reducing production costs and improving yield by implementing process changes and validating new methodologies.
Flextronics San Jose, CA 10/2007– 07/2010
Electronics Assembler / Rework / Tester
Perform optical alignment test on camera phones (fixed and autofocus)
Assemble and solder FPC (Flex Printed Circuit) to the camera module.
Perform test on FPC using voltmeter
Souter SMT (Surface Mount) components onto FPC.
Operates automatic and hand assembly equipment. (Torque drivers, wire strippers, crimping tools. Etc.)
Assemble PCBA’s into metal enclosures; install wire harnesses, cable ties, etc. per work instruction.
Read and follow instructions correctly.
Accountable to assure that equipment and area is clean.
Escalates issues to Manager.
Read and understands Omega Quality Management System (QMS)
Read and understands Omega Quality Policy
Fill out any appropriate forms or records as required
Read and understands current IPC-610 acceptability criteria
Perform lens traveling displacement test
Perform camera lens valuation
Verify FPC wire bond, Inspect FPC and camera lens, and Rework FPC and RMA Return. Validate of complex Hardware system and specialized in soldering and desoldering of SMD components on high-complexity circuit boards, including size 0201, 01005,01002,0403,0603,0805,1005 and high pin count components.
Removed and replace part size 0201, 01005, and jumper wire follow rework instruction.
Remove/replace/solder all kind of SMT components (ICs, QFPs, QFNs, BGAs, 0402,0201,01005 packet).
Demonstrated success in reducing production costs and improving yield by implementing process changes and validating new methodologies.
Jabil San Jose, CA 12/2003 – 05/2007
Rework Specialist
Validate of complex Hardware system and specialized in soldering and desoldering of SMD components on high-complexity circuit boards, including size 0201, 01005,01002,0403,0603,0805,1005 and high pin count components.
Removed and replace part size 0201, 01005, and jumper wire follow rework instruction.
Remove/replace/solder all kind of SMT components (ICs, QFPs, QFNs, BGAs, 0402,0201,01005 packet).
Demonstrated success in reducing production costs and improving yield by implementing process changes and validating new methodologies.
Teaming with Engineers by using Power Supply boards and PCB Medical
Read blueprints schematics assuring proper compliance and product needed
Utilize knowledge of Surface Mount Technology to properly lab set-up and preparational function.
Responsible for daily inventory control and cycle counts
EDUCATION:
Associate in Electronics Technician from San José City College in 2012
Certificate in Electronics Technician
Contact this candidate