Quality Control Cnc Operator
Resume:
Deaidra Thompson
Ridgeville, SC *****
***********@*****.***
Authorized to work in the US for any employer
Work Experience
CNC Operator
American Tactial-Summerville, SC
February 2025 to Present
• Operated CNC machines to produce precision parts according to specifications and blueprints
• Set up and calibrated machines, ensuring proper alignment and tooling for optimal performance
• Monitored machine operations, making adjustments as needed to maintain quality standards
• Performed routine maintenance on machines, including cleaning, lubricating, and replacing worn parts
• Inspected finished products for defects or errors, using measuring tools such as calipers and micrometers
• Maintained accurate records of production data, including quantities produced and time taken per part
• Implemented safety protocols to ensure a safe working environment for all team members
• Reduced material waste by optimizing cutting paths and minimizing scrap during production runs
• Achieved a XX% increase in productivity through effective time management techniques Fabrication Specialist
Boeing-Charleston, SC
September 2023 to November 2024
Physically creating aircraft components by performing tasks like cutting, shaping, welding, assembling, and finishing metal or composite parts according to blueprints and specifications, often using specialized machinery, to ensure the quality and accuracy of the final product;
• Performed quality control inspections on fabricated parts to ensure adherence to standards
• Maintained a clean and organized work area to ensure optimal productivity and safety
• Demonstrated strong attention to detail in fabricating complex components with tight tolerances DSP (Direct Support Professional)
Coastal Center-Ladson, SC
April 2022 to November 2024
• Health and safety of each consumer while following the prescribed behavior support plan (BSP), dining protocol, lifting protocol, and training and service programs as outlined in their individual support plan. As an essential employee, will be required to work overtime to ensure consumer safety and supervision depending on various activities and hazardous weather conditions. Reports to duty as outlined in policy and procedures and assumes accountability of the assigned individual(s).
• In accordance with Agency guidelines, rules, and regulations, follows sound professional techniques while providing direct, hands-on individual care to all consumers as needed. Participates in training and provides guidance to consumers in the development of activities of daily living skills. Transports and monitors consumers to and from off campus appointments, programs, and activities.
• In accordance with ICF/ID active treatment standards, implements training and service programs as outlined in the individual support plan, assists with daily activities, and engages consumers in group activities. In keeping with the individual support plan, completes timely and accurate data collection and/ or assessments.
• Maintains documentation in compliance with SCDDSN policy and procedures. Provides input and engages as an active member of the interdisciplinary team. Participates in team meetings and scheduled staff meetings as required.
• Responsible for reporting significant events and suspected abuse immediately per SCDDSN policy and procedures.
• Ensures safe, orderly, neat, clean environment for all consumers.
• Responsible for following all Agency policies and procedures and may be required to perform additional duties as required
Production PTS
Charles River Laboratories-Charleston, SC
February 2023 to March 2024
• Followed standard operating procedures (SOPs) to ensure product quality and consistency
• Operated and maintained production equipment, ensuring efficient and uninterrupted workflow
• Maintained a clean and organized work area, adhering to safety guidelines at all times
• Collaborated with team members to meet daily production targets and deadlines
• Ensured compliance with company policies, procedures, and regulations related to health, safety, and environmental standards
• Demonstrated strong attention-to-detail while performing repetitive tasks accurately within specified timeframes
• Maintained a high level of focus on workplace safety practices, ensuring compliance with OSHA regulations
• Supported quality assurance initiatives by conducting inspections or tests on raw materials or finished products
• Demonstrated flexibility by adapting quickly to changing production demands or priorities
• Actively participated in team meetings, providing input and feedback for process improvement discussions
Packaging Operator
BROWN AND ROOT/ DUPONT-Moncks Corner, SC
November 2020 to February 2022
Operation of machinery on multiple packaging /process lines. Operation of various cold blend mixing processes and performing equipment set-up/changeover as needed. Load and unload supplies and prepare finished product for shipment. Responsible for housekeeping in respective work areas. Inventory all packaging needs
• Proficient at running all equipment associated with the employee's process area.
• Developing the ability to lead and direct Contract Packers on packaging lines.
• Basic knowledge of products associated with the employer's process and how they are affected by process & raw material differences.
• Can recognize basic product /process problems. Should be doing basic troubleshooting when possible and seeking help when needed.
• Proficient at all basic job tasks and knowledge requirements, labeling, inventory, safety responsibilities and other basic workflows.
• Understands basic site policies, use of SOP's and run sheets, chain of command, ISO, Safety, etc.
• Assist in the development of the assembler packer role.
• Perform other duties as assigned
CNC Machinist/Machine Operator
VTL-Charleston, SC
April 2019 to November 2020
• Grade 1 Function
• Ensure process is loaded and unload and when required to maintain hourly output.
• Complete defined inspection checks to ensure quality of product meets required specifications.
• Identify and separate any rejected part that does not meet the defined quality requirement .
• Ensure that all products is handled and packaged in line with packaging instructions.
• Grade 2 Additional Functions
Ability to safely start and stop machine or process including robot and any ancillary equipment.
• Using HMI and NC controller, monitor tool life messages and ensure worn cutting tools are replaced at the required time .
• Ability to carry-out basic insert changes and understand the importance or cutting tool cleanliness.
• Ability to load and unload CMM machine and interpret data and make necessary machine offsets to maintain good process.
• Grade 3 Additional Functions
• Ability to safely power up and down equipment in a safe manner in accordance with operating procedures.
• Determine causes of machine malfunctions and make adjustment(s) or repair(s) to maintain good running condition.
• Ability to remotely set cutting tools and sister tooling.
• Responsible for changeover of machine or cell in a safe and efficient matter.
• Ensure all material and product is removed prior to changeover. Adhere to the correct procedures when changing the machine over, applying S.M.E.D techniques where applicable.
• Grade 4 Additional Functions
• Demonstrates strong understanding of process fixturing, work holding and tooling and importance of cutting fluids.
• Ability to understand and troubleshoot and use automated gages and wash systems.
• Using basic problem-solving techniques, able to complete analysis on a variety of possible production faults, to determine root cause and help implement preventative or corrective actions to eliminate reoccurrence of the problem.
• Ability to read and blueprints and geometric & trigonometric principles.
• Ability to run a variety of CNC machines or Cells within the company. Assembler
Mahle-Charleston, SC
June 2018 to April 2020
• Finalized assembly process
• Operated wiring units
• Followed quality and safety guidelines
• Performs routine production assembly operations on structural parts, mechanical assemblies, sub- assemblies and equipment and accessories using manual or automated assembly tools.
• Assembled components and subassemblies according to blueprints, diagrams, and work instructions
• Operated various hand tools and power tools to complete assembly tasks efficiently
• Inspected finished products for quality assurance, ensuring adherence to specifications
• Collaborated with team members to meet production goals and deadlines
• Maintained a clean and organized work area, promoting safety and efficiency
• Troubleshot assembly issues, identifying root causes and implementing corrective actions
• Performed routine maintenance on assembly equipment to ensure optimal performance
• Followed standard operating procedures (SOPs) to ensure consistent product quality
• Assisted in inventory management by accurately counting parts and materials used in the assembly process
• Trained new employees on assembly techniques, safety protocols, and company policies
• Adhered to all safety regulations and protocols while performing assembly tasks
• Worked closely with quality control department to address any non-conforming products or deviations from standards
• Achieved daily/weekly/monthly production targets consistently throughout employment tenure Machine Operator/Packer
Briteline Extrusions-Summerville, SC
February 2016 to June 2018
• Loading/stacking aluminum extrusions into different areas using carts or racks before or after it has been processed
• Operating machines that extrude, paint (powder coat), polish, sand, anodize, shrink wrap and fabricate the extrusions for our customers.
Customer Service Representative/Call Center
Iqor-North Charleston, SC
October 2012 to February 2016
Strong negotiation and resolution skills. Inbound and outbound calls for delinquent accounts, made payment arrangements, collection and working with customers to avoid interruption of services. Resolve customer complaints to keep loyal customers. Troubleshoot issues prior to transferring customers to the technical department.
• Managed customer accounts
• Assisted with technical support duties
• Handled billing issues and order inquiries
• Assisted customers with a warm and professional attitude
• Assisted customers with questions
Quality Control Inspector
Shimano-Ladson, SC
May 2010 to October 2012
• Perform thorough examinations of all materials and finished products
• Conduct and report internal audits and evaluations
• Implement and improve quality control operating procedures
• Identify and troubleshoot equipment problems and defects
• Participate in routine visual inspections
• Maintain a clean and safe work environment
• Use a precise work method to inspect, test, rework, measure and/or repack manufactured materials or products. Remove all products and materials that fail to meet specifications while adhering to ISO instructions and documenting all critical information to enable 100% accurate real time reporting Education
High school diploma
Capital High School
May 2006
Skills
• English
• Laboratory experience
• Kaizen
• Retail sales
• CNC
• SAP
• Cash Handling
• CNC lathe
• Order Picker
• Warehouse/ Labeling (4 years)
• Cleaning
• Customer Care
• Cooking
• Precision measuring instruments
• Working with people with developmental disabilities
• POS
• Multilingual
• Cash handling
• Organizational skills
• Precision Measuring Instruments
• Quality assurance
• Janitorial experience
• Forklift (Less than 1 year)
• Communication skills
• Custodial experience
• Microsoft Excel
• CNC Lathe
• Warehouse Experience
• Blueprint reading
• Electric Pallet jack (1 year)
• Manufacturing
• Forklift
• Caregiving
• Machine Operator (2 years)
• Microsoft Word
• SAS
• Customer service
• Tooling
• Order picking
• Assembly line
• Industrial equipment
• Microsoft office (2 years)
• Call Center
• Cleaning (6 years)
• Time management
• Quality Control (3 years)
• Cashier (4 years)
• Grocery store
• CNC programming
• Sales
• Assembly
• Telemarketing
• Heavy lifting
• Quality Inspection
• RF wrist scanner (4 years)
• Quality Assurance
• Computer skills
• Packaging
• Basic Math
• Guest services
• Calipers (1 year)
• Baking
• Customer Service (10+ years)
• Micrometer (2 years)
• Customer Support
• Restaurant experience
• Aircraft maintenance
• CGMP
• RF Scanner
• Woodworking
• 5S
• Cash register
• Order Picking
• Construction
• Quality control
• Shipping & Receiving
• GMP
• Materials Handling
• Home care
• Food handling
• Data collection
• Typing
• Driving
• CSR
• Home health (4 years)
Certifications and Licenses
Forklift Certification
Present
For my old job at Dupont, but it's ONLY for the sit down truck Driver's License
February 2004 to February 2028
Additional Information
I'm very reliable, dependable, very detailed oriented honest and a team player. I have the ability to resolve customer disputes and have plenty of patience working with others. I enjoy working with people and helping them.
Contact this candidate