Cnc Machinist A Team

Willie Hand

*** *** ******

Racine, WI *****

Cell :618-***-****

Main:************@*****.***

Characteristics:

Extremely motivated and driven to succeed in any environment. The ability to manage time independently and effectively on a team as required. To apply skills acquired through training and direct experience to the position available.

Skills: Hard worker, great team worker or can work alone. Always on time, good communication skills, love to learn to skills and tasks.

Can operate many machines such as CNC, Grinder, Forklifts, Composite technician, assembler machines etc.

Experience:

Aerotek: CNC Supervisor:

07/2024-09/2024

Responsible for coordinating staff that operates computer numerical control machines.

Assigning tasks to workers, maintaining employees' schedules, reviewing specifications of various products.

Finding ways to improve efficiency, troubleshooting machine issues, and assisting with repairs.

Ability to demonstrate the following, CNC machine expertise, leadership, problem-solving orientation.

Effective communication, quality focus, managing workflow, training new hires, reporting to HR and senior management.

Helping to resolve employees' issues and disputes.

Aerotek: CNC Machinist:

04/2023-05/2024 Lafayette, IN

Use precision measuring devices to effectively machine parts

Use blueprints, gauges, torque measuring devices and/ or other equipment to ensure conformance to quality specifications.

Ability to set up, adjust and perform operations with close tolerance and finish requirements on standardized parts.

Conduct pre and post inspections on all machined parts.

Plan and make difficult or new setups with necessary equipment, assist in the development of work instructions.

Perform 5s audits, perform safety stop audits observations as required, participate in the CI/PID process.

Follow company's production system (CPS) standard work sheets, other duties that’s assigned.

ALLIED RELIABILITY: Team Lead/Machine operator

07/2022-04/2023 Appleton, WI

Monitoring, maintaining warehouse machinery, set up manufacturing equipment.

Overseeing training of new junior machine operators. Using machine equipment to complete tasks.

Perform routine inspections of manufacturing equipment, evaluating the efficiency of each unit regularly,

Identify improvements as needed, inspect materials to make sure they are up to customers and company's needs.

Lead by example and provide leadership to the company's standards, carryout daily start up meetings, manage tasks assigned to the team to meet requirements of the plan.

Implement a culture of continuous improvement using appropriate tools and techniques such as lean manufacturing and 5s

Implement best practices to improve production throughout, capacity, quality, and reliability.

KTR: CNC Machinist:

02/2022-07/2022 Peoria, IL

Load and unload raw materials and equipment. Set up and calibrate accessories and equipment. Abide by company safety guidelines.

Keep detailed records for equipment and procedures. Perform necessary maintenance and cleaning on equipment.

Supervised machines as they ran and adjustments as needed.

Inspect finished product to ensure it meets required specifications.

Compare numerical displays with process sheet data to verify dimensional adjustments. Identify machine malfunction and resolved them.

Ensure specifications compliance of first run piece and spot check succeeding pieces.

Plans machining by studying work orders, blueprints, engineering plans, materials, and orthographic drawings.

LSPM: CNC Machinist:

10/2020-11/2021 Edwardsville, IL

Retrieve job related information such as job routings, part drawings, tool list, work instructions, in-process inspection sheet, etc.

Complete change-over activities, machine preparation from previous job set -up to new set-up.

Set up or program the computer responsible for the machinery. Follow safety requirements and maintain certifications.

Inspect the machinery and product for quality assurance. Perform daily maintenance on the machinery.

Analyze the information provided on blueprints or other explanatory documents to make sure the final product matches the draft.

Detect issues in the creation process and find solutions to ensure the machinery creates the product provided in the draft.

Launch Aviation/ Spirit Aviation: Composite Technician:

09/2019- 07/2020 Kinston, NC

Lays out, assembles, pre-fits, and bonds a variety of metal, composite or laminate fabrications, assemblies, parts, skins or equipment. Cuts parts or materials to size, obtain required information from prints, charts, sketches, work orders, documents, verbal and electronic information.

Follow engineering and manufacturing specifications and orders to determine parts to be bonded and the temperature and pressure required. Operate autoclave, hydraulic presses and ovens to complete the bonding cycle. Sand, burrs and smooth over areas. Applies sealing resins to cut or exposed edges.

May perform complicated rework or repairs, and monitor, verify quality in accordance with controlled procedures.

Train to become MVP qualified.

PMG INC/ Composite technician/Quality control

04/2017-06/2019 Florence, KY

Perform and documents all preventative maintenance on all the cell and support equipment, inspects products parts, both visually and with ultra-sonic equipment, to determine changes in dimensional requirements.

Troubleshoots systems components to determine if the operator can continue or if it is necessary to shutdown sections of the cell.

Used measuring instruments, including micrometers, dial indicators, gauges, maintained records including problem documentation, computer utilization logs, file identification.

Clean fuel pump heads on hats of machines, check my tooling and clean my tools if necessary

Plans machining, study work orders, read blueprints to make sure final products matches draft.

Aerotek Aviation: Composite technician/assembler Duluth, MN

03/2015-3/2017

Had to setup and adjustments, holding tolerance to blueprint and work instructions specifications.

Perform a wide variety of complex tests, checkouts, troubleshooting and rework components, assemblies; prepare reports and suggest improvements and modifications from data collected.

Use small hand tools and use semi-automated equipment to assemble a verity of production aircraft.

Assemble precision assemblies, setup and operate ream fixtures to drill, ream, countersink, spot face, hone and bore mating major assemblies.

Assemble aircraft and/or spacecraft structures with or without the aid of jigs and fixtures by drilling, reaming, countersinking, stop countersinking, dimpling as assigned, burring, fastening, filing, filling, fitting, aligning, trimming, shimming, and remove surface defects.

Oshkosh Automotive Corporation: Oshkosh, WI

02/2013-03/2015

Troubleshoot and repair any vehicles system using schematic, repair manuals as available, and test equipment as needed.

Check and adjust vehicles systems for completion and functions.

Repair assembly defects and install shortages before and after truck inspection.

Rotate as needed in any assembly or sub-assembly function.

Train new employees or those moving in a new work area, help resolve repetitive defects by investigation and retraining assemblers in involved area.

Specialized on all types and phases of assembly or disassembly and tear down of reman vehicles and applicable components.

Work including electrical, mechanical, hydraulic and pneumatic systems.

Working with suitable cranes, dollies, etc. provided for heavy components.

Required intra-plant driving of vehicles.

Case New Holland: Grinding Mill Operator/ Assembler/ CNC Machine Operator Racine, WI

09/2008 – 12/2012

Marked and cut openings in sheeting installed support framing around openings and installed preassembled doors, handles, hinges, and catches.

Fitted, drilled, bolted, and riveted metal frame posts, headers and backplanes together to make rear trailer body section, verifying tolerances with square and rule.

Selected component parts from stock bins, according to instrument being assembled.

Tended single- and multiple-spindle screw machines equipped with automatic indexing and feeding mechanisms that drill, turn, bore, thread, tap and face metal bar stock according to specifications.

Operated panel board to control machinery and equipment, such as conveyor belts, vibrating feeders, centrifugal separators and distributors.

Started grinding and separating machinery and equipment.

Set up and operation of various CNC machine tools, which include lathes and mills.

Responsible for keeping the machine tools running and checking the parts being run, this includes the operation of several machine tools at one time.

Adjust offsets and locations, as well as change inserts and cutting tools, as necessary.

Tear down setups, and return tooling to its proper location and get machine ready for next setup.

Driving electric, gas, diesel or petroleum powered trucks prepared with metal fork attachments and hydraulic system that is useful for lifting and pallets for carrying.

Education:

UW Parkside College, Kenosha, WI- Business Management coursework

Washington Park High School, Racine, WI- Diploma

Contact this candidate