Material Handler Cell Phone
Resume:
Rhyan Holway-Keyes
PO Box ***** Lethbridge
RPO Uplands, Alberta T1H 5P2
Cell Phone : 867-***-****
Email : *****.*.*@*****.***
Richardson International
Canada R3B 0X8
Good day, my name is Rhyan, and today I am sending you a copy of my cover letter and CV to apply for the position of Material Handler that is available in the location of Lethbridge, Alberta.
I have recently relocated to Lethbridge from the Yukon, and am seeking a full time position, and coming upon this job posting sparked my interest in working for your well known company Richardson International. Upon research, I do believe this would be an excellent opportunity for a long term career choice. As you will see, I have many skills and attributes that which match your qualifications and responsibilities regarding the position in order to maintain smooth operations of your agricultural company. This would allow for a wonderful and favourable transition in making Alberta my long-term home.
To expand on the topics of responsibilities and qualifications towards the Material Handling position, my past employment has been mainly in the professional Mining Processing sector in which I have gained many skills that can be easily applied to the agricultural sector for a step in the door approach. To expand upon these subjects relating to the responsibilities regarding this current opportunity, I have attended daily tailgate and safety meetings, daily cross shift updates, and at all times understood and implemented all workplace health and safety requirements, even going beyond and applying them to my daily life. With good mechanical aptitude and an excellent record of safety habits. I have conducted pre-trip walk around safety inspections on machinery, daily field level hazard assessments of workplace areas and for tasks to be completed. Near miss documents were kept on person to record any discrepancies throughout the shift. I have always reported all incidents immediately to supervisors, big or small to ensure the safety of all, from overhead hazards, tripping hazards, including maintaining a tidy work area, and also equipment malfunctions. Many times over I have gone through and updated many training courses that would be complimentary such as, WHMIS and MSDS logs which applied to working with many dangerous chemicals and reagents along with the hazards that particular materials being stored, and the actions needed if exposure resulted. Fall arrest, confined space entry, skid steer operation, forklift operation, strict LOTO procedures, were implemented daily as well. To conclude my introduction, I have also have had years of experience operating various computer programs and a few automated systems, and am very adaptable in learning and integrating new systems to effectively work in a team oriented production facility.
I believe my experience and expertise will carry on with ease and I enjoy the many challenges that go along with complicated operations, and strive to help achieve the goals that which your company has to offer. Including a well-balanced lifestyle, working with great people, at the same time as making a good living in today’s bustling world. Using and applying the skills that I already acquire, as well as reaching for the new aptitudes, I know there is much to learn through interest and application. I am applying with confidence, this presentation of my interest in being part of the many opportunities with being employed with your company. Thank you for taking the time to receive my application and hope to hear back from you soon.
Rhyan Holway-Keyes
PO Box 33078 Lethbridge
RPO Uplands, Alberta T1H 5P2
Cell Phone : 867-***-****
Email : *****.*.*@*****.***
Richardson International
2800 One Lombard Place
Winnipeg, Manitoba
Canada R3B 0X8
Objective : To obtain a full time position with your company
Qualifications :
- High level of Crushing Plant processing experience
- Previous Mill processing operations experience
- Very willing to learn, adaptable
- Able to follow directions and to prioritize
- Excellent written and verbal communication
- Alert and aware of surrounding environment
- Excellent hand eye coordination
- Work well alone and in a team environment
- Excellent at multitasking and taking on new skills
- Problem solving and troubleshooting skills
- Safe housekeeping habits
- Reliable, trustworthy, respectful
- Good computing skills including DCS systems, Delta v, email, word, excel, daily logs and Teams.
Education and Company sign off Experience :
- Class 5 Drivers license with clean abstract
- Clean Criminal Record Check
- Fall Arrest
- First Aid Level 1 in the past
- Food Safe in the past
- Confined Space Entry / Watch person
- LOTO Procedures
- 10,000 Volt Training
- WHMIS / MSDS
- CSTS 9
- H2S Awareness
- Fire Extinguisher Training
- Explosives Awareness
- Working at Heights / Ladder Safety
- Fire and Emergency Response Plans
- Heavy Duty Crane Operation / Rigging and Hoisting
- Skid Steer Operation
- All Site SOP Sign Offs
- Wildlife Awareness (food waste sorting) / Bear Awareness Course
- Forklift Safety Certification
- High School Graduation Certificate June 2001
Work Experience :
June 2022 - May 2024
Victoria Eagle Gold Mine, Yukon Territory
Labourer / Process Operator 1 / Process Operator 2
Many stages in this fairly strait forward circuited, Gold and Silver mine, which was a heap leach operation. Started in the position of labourer, mainly hand shovelling under and near conveyors in the crushing plant and throughout the mine site. This position came with many trouble shooting tasks to maintain production values. This entry level position was working in very dusty conditions, in all weather, where all PPE was worn including full face and half piece respirator masks. Duties included attending daily safety meetings, using fall arrest (harness, lanyard, shackles, anchor points) to complete tasks. Confined Space Entry / Watch Attendant (permits, air quality tests, fire watch, in screen decks, chutes, dust collectors, conveyors, crusher bowls or dump pockets). Also Heavy Lifting and Assisting others. LOTO procedures (tags, permits, lock boxes, key and lock, bump tests ; remote and local, as well as switching breakers). Exit and Entrance snow removal completed as needed. Promoted to Operator 1 and then Operator 2, gaining skid steer operations (pre-trips, snow removal, freshet mitigation). Tasks included shovelling off conveyors if overloaded (Ensuring LOTO), Mitigating Hazards with the use of caution tape, danger tape and barricading, full circuit visual inspections (insuring guards in place, pull cords, conveyor and chute inspections, utilizing task planning and prioritization, reporting all incidents to Supervisor, Mill writes and Electricians immediately), New Employee Training (implementing time management and all safety procedures). Then was Control Room Operator. Tasks included, running Primary Crusher (Gyratory) with use of Delta v, excel, daily log book and Teams Programs. Maintaining coarse ore pile levels, trouble shooting (for example over sized ore issues), and remote rock breaker operation. In this position I maintained high levels of radio contact with Supervisors, Mill writes, Electricians, and my fellow employees on the ground. Being in close proximity to Heavy equipment such as 180 ton haul trucks, graders, loaders, skid steers, excavators and fuel trucks was on a daily basis.
June 2018 - September 2019
Couer Silvertip Mine Site BC/Yukon Border
Mill Operator level 3
Main position in the silver/lead/zinc ore processing plant was the Paste Back fill circuit. This involved many aspects to ensure quality of tailing and cement ratio mixing to insure safety and quality of the underground stopes being back filled. Run by HMI control room equipment and cameras to insure smooth operations and problem solving. Two other circuits that I was responsible for were, yet not limited to the mill as a whole, was Dewatering, which was the final stage of the solution of the particular moisture levels of the lead and zinc minerals before shipping. Other areas were to help problem solve in the bagging room and the Grinding circuits if any problems were to arise. Duties also included the training of new employees when the opportunity arose. These procedures involved high attention at all times to maintain the highest quality and standards to have smooth operations. Daily duties included keeping of records, log books and reports, along with constant equipment checks. Keeping safety in mind at all times, especially concerning PPE, conveyors and LOTO procedures. Very high physical lab labour involved, many flights of stairs, heavy lifting, shovelling, fixing pumps and lines, running multiple thickeners simultaneously, keeping safe entry ways, floors clear of tripping hazards, and the safety of others. Radio communication and contact with supervisors on surface and underground operations and water treatment throughout was a necessity. Much of the time working alone, yet at times a very team oriented work environment.
September 2017 - May 2018
Westridge Cabinets, Red Deer, Alberta
Truck Driver / Delivery
Loading and unloading of single axle five ton, 34 ft. trucks. Team oriented deliveries throughout various Alberta new building sites, hotels and apartment construction sites. Heavy lifting from 50- 400 lbs, ensuring cabinetry along with accompanying parts, including interior finishing of buildings were in pristine condition. Various paperwork and computer work, daily and continuous safety checks on company vehicles, as well as ensuring the safety of passengers and other motorists. Strictly following all regulations associated with highway and city transportation, log book, etc. Always using PPE, including fall arrest harnesses.
May 2017- September 2017
Skywings Aviation Academy and Red Deer Airport Springbrook, Alberta
Dispatch and Ramp Attendant
Duties included, but were not limited to moving and cleaning Aircraft, inside and outside of hanger. Fuelling Aircraft using fuel truck and bulk tanks Loading and unloading luggage from Aircraft. Custodial work. Invoicing using Excel Spreadsheets. Answering Telephone Calls, Booking and Organized Flights, Fuel Checks and fuel dips. Meeting regulatory standards on all Procedures and safety protocols. Aviation Fuel calls. Bulking Fuel Tanks, Trucks and Equipment PPE, First Aid, Fire Extinguishers
Safety Checks.
August 2016- December 2016
Windows and Doors Manufacturer
Northerm Windows and Doors
Whitehorse, Yukon (seasonal operations)
Introductory stages of the production of windows and doors, main duty was on the hot melt station and argon filling. Being the third stage of production, was crucial for the highest standards of inspections and sealing of the glass, or sealed units. A broad range of skills, allowing for the knowledge of how glass works, and its boundaries. Equipment was upgraded and my manual technique was obsolete. Introduction into windows and doors manufacturing. Various hand and air tools, trained in techniques used. Experience with fall arrest harness and safety. Janitorial and general labour duties followed.
June 2016- August 2016
Pex Piping Manufacturer
CB Supplies, South Surrey, BC
worked as a professional, as part of an effective team to manufacture potable PEX pipe for plumbing systems, radiant PEX for in-floor heating and snow melt systems water service and geothermal pipe coated copper coils- Gas Guard and Petro Guard. Tasks included but not limited to various stations and manufacturing stations. Tracer wire attachment, wrapping, print lines and pex pipe inspection. Used various warehouse equipment (pallet jacks and air tools).
April 2016- June 2016
Temporary warehouse dock worker
DAMCO Distributions Inc.
Queensbourough, New Westminster, BC
Cross-dock Labourer, unloading materials from oncoming semi truck trailers and loading these materials directly into outbound truck trailers. Duties included changing the type of conveyance, to sort material intended for different destinations, to combine material from different origins into transport containers with different destinations. Use of pallet jacks various paperwork. All physical, manual labour lifting from 10 - 120 lbs. constantly to insure quality and specifications of the company.
October 2015 -March 2016
Bakery Assistant
Wykes' Your Independent Grocer
Whitehorse, Yukon
Baked bread and various pastries by following recipes and food presentation specifications as set by Loblaw's Restocked all items throughout shift to ensure fresh products were available to customers at all times Maintained the highest levels of sanitation and cleanliness during the fast-paced work day. Kept an organized and tidy work environment at all times; organized the freezer, maintained stock rotation; cleaned coolers, oven and proofer; cleaned walls and display cases; washed dishes and other various janitorial duties Lifted up to 50 lbs. throughout the work day. Customer service. Received cake orders and other special requests, answered phone calls.
Obtained Food Safe Certification February 2016
October 2015
General Labourer I Furniture Assembler
Jonathan Morgan and Company
Whitehorse, Yukon
A 2-week contract unloading semi-trailers.
Worked as part of a collaborative team to distribute new furniture into and throughout the entire newly-built school. Heavy lifting from 30-100 pounds, usage of pallet jacks, carts and dollies. Constructed the various furniture pieces using hand tools, as per instructed criteria. Problem solving skills. Ensured the constant safety of all area workers. Constantly kept a very organized and professional work environment
May 2015-September 2015
General Labourer / Janitorial
Pioneer RV Park
Whitehorse, Yukon
General Labourer duties included spring preparations and maintenance throughout the busy tourist season. Landscaping, raking, road maintenance, construction of a recycling building, welder's helper. Operated a forklift; completed water system start-up and shutdown procedures; painted all door and window cells throughout the property; washed motor homes, buses and vehicles in washing bay upon request. Worked as a cook for organized banquets and barbecues throughout the summer, mainly for 40-60 persons. All janitorial tasks: cleaned all public areas on a daily basis. All customer service tasks involved in the operation of small convenient store and office.
September 2014- February 2015 Carpentry labourer,
Evergreen Homes and Construction Whitehorse,Yukon
(seasonally affected)
Many different projects within the housing construction field
Multitasking skills used to help various trades contractors. Mainly outdoor work: garbage clean up, re stacking of lumber, loading housing units with drywall, organization of materials, as well as interior clean up. Worked as a team member as well as individually, continually ensuring the safety of myself and others.
July-September 2014
Kitchen Helper / Line Cook
Ricky's Bar and Grill
Whitehorse, Yukon
Worked as a collaborative team effort to successfully complete the daily tasks such as prep. Work, cook’s helper, dishwasher, janitorial.
Quickly adapted to a 100-item menu within a one-week period. Received food orders and prepared food items in accordance with the franchise standards. Kept cleanliness of kitchen, walk in coolers, fridges and freezers. Also painted all interior doors. Food Safe was an asset.
September 2012 - December 2013
North American Tungsten Corporation
Cantung Mine Site, NWT
Mill Operator Level 2
Schelite Flotation / Copper Flotation Operator
Gained much experience and training with the initial stages of the processing of Schelite and copper abstraction using unique and professional flotation processing techniques, not limited to thickeners, pumps and lines, flotation cells, various reagents and their scientific uses. Many of the preliminary circuits that which played a vital role in proper operation of this flotation circuit, included Crushing stages, grinding, proper reagent mixing, and the grade of ore coming into the mill, keeping constant checks on the operation of shaker table lines, beds and many other various aspects in order to maintain quality of operations. Other stations involved to insure quality, (for this was not an HMI controlled mill), was the quality of substrate in and through the roasting of the Schelite and copper final concentration, as well as the recovery percentage. This occupation kept me on a constant high level of continuous inspections to make the necessary changes to insure the targets were reached. Use of an XRF machine and sample taking were on an hourly basis to maintain target levels. During much of the duration of employment here, I was also a member of the On Site Safety Committee.
October 2010 - August 2011
North American Tungsten Corporation
Cantung Mine Site, NWT
Mill Operator Level 3
At this stage of employment here, I was introduced to the many stations involved and quickly came to operate the numerous machinery necessary. With the introduction to the Copper Flotation and abstraction circuit, insured me to quickly excel through the necessary techniques of abstracting the minerals from the ore. Once again, high physical labour in a high risk environment, which tested my strength, endurance, stamina and the ability to multitask. Experience in the positions, respectively, of Labourer, Blender, Primary Crusher (Jaw), Secondary Crusher (Tertiary), Reagents Mixing, Grinding (Ball and Rod) and Roaster circuits. Constantly maintained an environment of safety and tidiness. In this time period, gained more than 3,000 +/- hours of forklift operating experience, loading and unloading of semi trucks in all weather conditions. Was a member of the on site safety committee, operated various sizes of overhead cranes, confidence in confined space entry procedures, including testing of air quality, use of all safety PPE, including fall arrest harnesses, and all SOP's regarding safety at all times.
October 2007 - November 2009
North American Tungsten Corporation
Cantung Mine Site, NWT
Mill Operator Level 4 and 5
During this employment stage, my experience was started as a mill labourer, physical labour mostly consisting of shovelling and the operation of a forklift. Then was moved up to operations, running first, the position of Blender, then Primary Crusher (jaw), which involved many conveyors and chutes, and electromagnets to remove steel, thirdly, the Secondary Crusher (tertiary), which also included many conveyors leading to the fine ore storage bins, and then running the Reagents mixing station. During this time frame, was introduced to the Roaster and Grinding circuits. In turn, excelled me into the knowledge of entire mill operation as a whole. Maintained a constant safe and tidy work environment free of hazards, insuring the use of all required PPE at all times. Gained 2,000 +/- hours of forklift experience.
June 2011- September 2012
ALS Minerals Laboratory
Whitehorse, Yukon
Seasonal Permitting Shipping and Receiving Assistant (W2) Warehouse Operator
Responsible for receiving core samples, ensuring all necessary documentation was accurate. Delivered samples to carriers. Updated the shipping log and all other required documentation upon confirmation of deliveries, including radiation testing of samples. Continuous lifting from 35-80 lbs. Other laboratory duties included layout procedures, crushing and pulverization procedures, as well as various carpentry duties such as building sample boxes. Obtained Forklift Safety Certification September 2011.
June 2010- September 2011
ALS Minerals Laboratory, Whitehorse, Yukon
Seasonal Permitting Sample Preparation Technician / Layout Technician
Duties included sorting rock samples on layout tables in respective order, and packing samples for temporary on site storage, and sorting and weighing samples for shipment.
June 2010 - September 2011
ALS Minerals Laboratory, Whitehorse, Yukon
Seasonal Permitting Crusher Operator
This area involved the handing of, crushing and packaging of the core samples provided by various drilling operations throughout the territory. Prior to, and during each shift, was responsible for area clean up, assembling of sample boxes, sorting of master samples, area inventory, area safety inspections, and bin painting and numbering. Various types of paperwork was completed to insure the precision and accuracy of the processes to ensure non contamination of delicate samples. PPE worn at all times, including respirators and hearing protection, as well as operation of dust collectors.
References available upon request
Contact this candidate