Facilities Maintenance Management
Resume:
Anthony Eden Williams Kuinten Singaraj,
Profile:Facilities Management/ Technician
Email: ***************@*****.***, ************@*****.*** Contact: +94-778******, +94-776******
Carrier Objective-
To seek exciting and challenging carrier to further my skills, abilities and experience to the fullest, and to work all the latest and emerging technologies in the industry. While rewarding I am ready for new challenges and opportunities, and with a great deal of soul searching, I have identified the industry with management as one that would be most fulfilling to me. I am interested in apposition that would allow me to combine my training and creative talent. History of Employment
Working as a Fabricator (my own) since Sep 2023 to up to now. Work Experience
Fabricating AC Duct, ventilation duct system. Making aluminium door, window, fly screen door and window, shelves, book shelf, desk, and repair and replace roofing system, roof sheets and install and repair door hinges & door locks.
Worked as a Facilities Maintenance Foreman in Amentum/ WRM-AFCENT Program, The direct contractor to the United States Air Force. Since 2005 to July 2023. ( During 2005-2008 period I was supporting a work control Clerk / Maintenance Technician and carpenter then promoted as a Lead / Maintenance Foreman in 2009 to 2023 in the same Department )
Job Summary
Supports the Facilities Maintenance Superintend in the maintenance of all DynCorp International operational and domestic facilities at designated WRM Sites. Supervises and directs the activities of the Facilities Maintenance Team
(FMT). Work includes masonry, metal work, electrical, plumbing, carpentry; HVAC and assisting the Supervisor in the up keep of associated paper work and records. Carries out all duties in accordance with DynCorp International ISO 9001 Quality and Safety Standards.
Job Duties and Responsibilities
Maintains the highest standards of professional performance within the FMT.
Open & close PM & CM work orders in Maximo Computerized Program & ordered parts through Maximo & scheduled & generate new assets and update production plan record & man hour calculation report.
Maintains an up to date working knowledge of Health and Safety Regulations and ensures that these are adopted at all times in the working environment.
Reports all cases of misconduct or poor performance to the FMT Supervisor.
Ensures, by monitoring, that the Preventative Maintenance Program for all DynCorp operational and domestic facilities is strictly adhered to.
Monitors all work carried out by Contractors.
Coordinates with the FMT Supervisor to provide training and professional development of the FMT personnel.
Acts as alternate to the FMT Supervisor in his absence. Highlight of WRM work experience
Doing all kind of Carpentry works, Building Roof and structure maintenance work, Fabrication jobs and General Mechanical for Roll up doors and Personal door, paining, installing and repairing door locks.
Updating daily man hours, daily time sheets, cost of purchasing and end of monthly work reports.
Perform final inspection of all CM & PM works and update status and closed work orders in maximo.
General Electrical installation and maintenance, domestic equipment hook ups at WRM Facilities, Fire suppression system minor maintenance and groundings test.
Operates/maintains electric hand/pneumatic power tools ( grinders, sanders, needle guns, drills, saws, and metal shears, air reels& air regulators ) and shop-supported equipment
Supporting to BEAR BASE to get done task on time ( Function testing and replacing parts for BEAR assets such a power generator, power panels, water cleaning system, dome shelter). Inspecting, cleaning, repairing and packing kitchen system, sanitary system and dome shelter.
Perform plumbing and fittings works & wall painting and spray painting.
Perform maintenance and repairs on the HVAC units including Split pack, window type, commercial package type and HVAC as well and refrigeration charging and recovery practice and gas Welding.
I Good knowledge and experience with multiple Refrigerants, Nitrogen, Argon, Acetylene and Oxygen for handling, maintaining and storing Accordance with OSHA Standards.
Good knowledge and experience in “used or waste product” of Hazardous material handling, storing, accumulating, labeling, and classifying.
Inspects hazardous materials within the assigned work center and coordinates the appropriate office for the disposal of HAZMAT when required.
Storing items in proper locations (shelves or bins or box) and labeling proper part number, noun and location number.
Maintaining SDS for all shop use Hazardous items.
Steam Plumbing and Sewage Plant Maintenance.
Maintaining inventory and other stock records for shop items.
Accepts recommended additions to bench stock item, provided history with recommendation to supervisor for consideration.
Maintaining shop tools are in working condition, reports damaged tools and requisitions replacements.
Build up individual tool kits for various crafts using established tools list.
Signs out tool kits for various crafts suing established tools list.
Signs out tools kits and maintains records in secure file.
Stocks most common hand tool items to replenish kits as approved by supervisors.
Maintains inventory and other stock records.
Accepts recommended additions to bench stock from workers, provided history with recommendation to supervisor for consideration.
Maintains shop tools are in working condition, reports damaged tools and requisitions replacements.
Builds up individual tool kits for various crafts using established tools list.
Signs out tool kits for various crafts suing established tools list.
Signs out tools kits and maintains records in secure file.
Stocks most common hand tool items to replenish kits as approved by supervisors.
Train and explain to core workers about safety procedures,(such a lock out tag out, working on roof or man lift).
Have good Experience in Maximo. (Open & close work orders, Scheduling PMI & Unscheduled work orders, create new asset, parts ordering through work orders & generate new PMI for new assets).
Good knowledge and experience in “good product” of Hazardous material handling, storing, accumulating, labeling, classifying and search & placing MSDS.
Good experience with industrial safety and understanding and enforcing “AFOSH & OSHA” standards.
I Have Good Experience In Maximo Computerized Program (Creating/Closing Work Order, Scheduled PMI
&Unscheduled Work Orders System In Facilities Maintenance And Logistic System).
Record keeping and Data entry (Daily man hour calculation, lightning/grounding points reading, drawing location map for all facility equipment’s)
Parts ordering to defective equipment, in accordance with applicable Technical order/ Manuals.
Customer Service & Handling the customer complaints.
I have good experience in driving light vehicles such a car, van, light truck,Multipurpose vehicle, canter truck, forklift,tow tractor & High Reach trucks)
Troubleshooting & rectifying maintenance issues.
Maintaining and repairing roll up doors, personal doors, windows, Repairing &replacing portable building ceiling, interior & exterior wall penal. Repairing and replacing roof sheets and frames, installing and repairing gutters & downspout, Installing & repairing all kind door locks, door closer, door hinges &replacing door & window glass.
Worked as a Fabricator in kings Steel furniture & carpenter shop at Kandy, Sri Lanka ( From 1997 to 1998) Work Experience:
1) Installed and repaired of items such as metal doors, windows, roof system, floors, walls, ceilings, exterior structures, cabinets, shelves, railings, cabinets act. 2) Making duct and all kind metal works
3) Cleaned corrosion, applied primer and spray painting.
Worked As a Receiving clerk in Prima LTD Sri Lanka (from 1999 to 2000) Work Experience:
Compiled, reviewed, and maintained data from contracts, purchased orders, requisitions, and other documents in order to assessed supply needs.
Examined and inspected stock items for wear and defects, reporting any damage to supervisors. Marked stock items using identification tags, stamps, electric marking tools, and other labeling equipment.
Received and counted stock items, and recorded data manually and using the computer. Packed and unpack items to be stocked on shelves in stockrooms, warehouses, and storage area.
Worked as a carpenter in contraction company at Sri Lanka ( From 2000 to 2004) Work Experience:
1) Providing cost estimate of materials required for the construction of wooden fixture. 2) Selecting suitable wood type, as well as other materials needed for construction work. 4) Creating custom woodworks used in the crafting of fine furniture units 5) Repairing or replacing damaged wood parts in structures such as beds, cabinets, and desks. 6) Ensure the regularity of woodwork by carrying out smoothening and various operation using planes and staining materials
7) Take measurements to establish furniture dimensions during the design or construction of wooden work.
8) Cut and shaping wood materials to obtain components for a furniture unit. 9) Assemble and join wood components with the aid of nails, glue, and hammer to form a complete structure
10) Bore holes on wood materials/structures to create lodge space for screws and bolts 11) Installing wood add-ons such as hinges, handles, and locks onto finished products. 12) Making door, window& shelves as required.
13) Repaired and replaced all types of roof membrane, sub roofing, sheeting and base materials.
Worked in Dyncorp LLC WRM Program (Since 2005 to 2009) Work Experience:
Worked as a HVAC technicians, the performance of periodic inspection, maintenance, and repair actions on assigned BEAR and RADR assets. And support to BEAR all section. (Fabrication, electrical, carpentry, generator maintenance, welding work and store).
1) Repairs, inspects, fabricates, cleans, operates, maintains, corrosion controls, and reconstitutes BEAR order of Battle (BOB) assets/equipment in accordance with Maintenance Action Sheets, Technical Orders, Manuals, Checklists, Regulations, Maintenance Action Sheets, and Unit Type Code (UTC) Configuration listings. 2) Prepares assets/equipment for air/sea/road haul shipments IAW Technical Orders, Manuals, Checklist, Regulations, Maintenance Action Sheets and UTC Configuration listings. 3) Performs servicing and/or maintenance of in-use assets as required. 4) Repairs, inspects, cleans, operates and maintain contingency plumbing facilities such as Laundry, Kitchen, Latrines and Showers modules.
5) Performs visual inspections on newly received and returned deployed assets. 6) Responds to inquiries concerning storage and status of assigned equipment. 7) Schedules and coordinates with the Work Control all shop work assignment. 8) Instructs and trains personnel in maintenance repair techniques, inspects their work performance, identifies training requirements, and documents training records. 9) Conducts training on quality assurance, safety, Material Safety Data Sheets, security awareness and other subjects in accordance with appropriate plans.
10) Orients new personnel to work crews, planned work assignments, and established work methods. 11) Research asset/equipment discrepancies, identifies them the Bear Functional for coordination with the customer, and formulates plans for repair.
12) Evaluates maintenance schedules and analyzes production goals weekly. 13) Submits Local Purchase or ILS-S supply documents to procure parts, consumables and equipment. 14) Reviews supply documents to verify status of parts. 15) Assists in the erection, construction and operation of BEAR shelter systems and associated equipment to support real world exercises and contingencies.
16) Stocks, maintains, and requisitions parts, tools, and supplies to perform required work on assets. 17) Prepares and inspects assets and equipment for shipment by air, sea and surface transportation for exercises or actual deployments.
18) Responds to enquiries concerning storage and status of assigned equipment. 19) Utilizes testing of diagnostic equipment while troubleshooting hydraulic, electrical, fuel pneumatic, and plumbing systems and components for serviceability. 20) Prepares and completes documentation including work orders, US Air Force supply and forms, updates historical data and coordinates actions required with work orders. 21) Directs maintenance according to schedule to meet monthly goals by following technical orders and manuals. 22) Develops standards for subordinates, implements the precept of quality assurance within the guidelines of the ISO 9001:2015 Quality Management System Standard (QMS), ensures that all work is completed to quality standards and provides employees with feedback on their progress. 23) Oversees operation, scheduled/unscheduled maintenance, and daily preventative maintenance, including but not limited to, fueling, fluid checks, and overall functionality of power generating equipment 24) Orients new personnel to work crews, plans work assignments and establishes work methods. Educational Qualifications
Successfully completed General Certificate Education Ordinary Levels Examination in 1995.
Successfully completed Higher National Diploma in Information Technology (Level-5). Professional Qualifications
I have successfully completed Carpentry Vocational Training. The Course conducted by St. Joseph’s Technical College at Trincomalee, Sri Lanka.( 1996-1997).
I have successfully completed One year Air conditioning and Refrigeration Vocational Training. The Course conducted by St. Joseph’s Technical College at Trincomalee, Sri Lanka.( 1998-1999). Gained Training Programs while work in DynCorp International.
Logout / Tag-out Training,
Fire Extinguisher Training (self-rescue, fire systems, life fires, chemistry of fire, 3 principles of extinguishment and practical use of extinguishers)
Successfully Completed the Basic First Aid and Emergency First Responder (CPR and Defibrillator)
Safety Training (Tools handling, Fire, Driving, Heat Stress, Mechanical, Hazardous, Loading, Unloading and High Voltage Appliances)
Hazardous Communication Training (labels, labeling, hazardous chemical inventory and material safety data sheet)
OPSEC Awareness (Development of Security Excellence, Defense Security Services, USAF)
I have been following LEAN SIX SIGMA Course.
Personal Details
Name In Full :Anthony Eden Williams Kuinten Singaraj
Date of Birth : 1979 December 01
Nationality : Sri Lankan
Passport # : N11379014
NIC No : 793364717 V
Gender : Male
Civil status : Single
Language Fluency : English, Tamil, Sinhalese, Malayalam and Basic Hindi
Address : No,727,Anbuvalipuram, Trinncomalee, Srilanka
Driving Licenses : Valid Sri Lankan Driving License (Heavy Vehicle) and Qatar Driving License (Light vehicle and Fork Lift).
Non Relatives Referees
Mr.Mike Mims Mr.J.Micheal Miller
FMT Superintendent General Engineer (ACC AMIC/PCEC) Mobile No: 009**-******** Mobile No: 757-***-****
Email: *******.****@*******.*** Email: ****.******.***@**.**.*** I declare and affirm that the above particulars information is true and correct. Signature:
A.K Singaraj. Date: 04-Mar-2025
Contact this candidate