Quality Assurance Control

S. MARIMUTHU

Block *** #**-*** Jurong East St *1, Singapore 600322

*********@*****.***

Phone: +65 90294578

Personal Details

Full Name : SUBRAMANIAN MARIMUTHU

NRIC : S7862382I – Singapore Permanent Resident

Nationality : Indian

Date of Birth : 08/05/1978

Driving Status : Class 3 (Singapore Valid License)

PROFILE SUMMARY

Having 22 years of professional work experience in engineering field, in quality assurance and quality control of experience as a Quality Assurance/Quality Control Engineer / Inspector and involved in various kind of inspection activities in Mechanical, process Piping, press vessels, heat exchanger, boiler tubing, Pipelines, and Structural, Welding, NDT and Mechanical works in the field of Petrochemical industry, Power Plant, Refinery, Oil & Gas Plants, LNG Terminal, Shipyards and fabrication workshops.

Good knowledge in Project Planning, P&I and Isometric Drawing, Welding, Piping Installation, pressure vessel Structure Fabrication & upstream and downstream piping reference with International Standard (ASME V, ASME VIII ASME IX, AWS D1.1, B31.3, API RP 2X, API 570 and API 510, API 1104)

EDUCATIONAL QUALIFICATION

DIPLOMA IN ELECTRONIC COMMUNICATION ENGINEERING (DECE (3 Years full time))

STATE BOARD OF TECHNICAL EDUCATION, INDIA

Certified “ASNT NDT LEVEL 3 : UT, MT, PT, RT

Certified Senior Welding Inspector “AWS-SCWI by AMERICAN WELDING SOCIETY

Certified “API 570 Process Piping Inspector AMERICAN Petroleum Institutes,

Certified “API 510 Pressure Vessel Inspector AMERICAN Petroleum Institutes

Certified “PCN RI LEVEL II Radiography Film Interpretation” in BINDT

Certified “PCN – PAUT (PHASED ARRAY Ultrasonic Testing Level II) in BINDT

Certified “PCN LEVEL II Ultrasonic Testing (3.1,3.2,3.8,3.9)” in BINDT

As INSPECTION NDE CROSS CHECKER for client such as SHELL OFFSHORE INC.(SINGAPORE) Project under project SHELL SPARTA FPU PROJECT in Mega Shipyard Scope of Working : UT Cross Checking Pontoon, Column and Top side structure and Piping and Pressure Vessel, Review the Radiography Film Interpretation for structural as per APIN RP 2X and Piping an per B31.3. Daily routine surveillance inspection of upstream and downstream of piping and Pontoon, column, TOPSIDE structure and helideck structure

As INSPECTION of THIRDPARTY/VENDER INSPECTOR for client such as SHELL PHASE 4 GUMUSUT/MALIKAI/ Exxon-YELLOWTAIL/Exxon- URAU Project. . Scope of inspection such as ATA,FAT,FFI for Tubing Hanger, Choke and Tensioner . Visual inspection of Pressure vessel, hydrotest and flange management according to clients specification.

As INSPECTION NDE CROSS CHECKER for client such as SHELL INTERNATIONAL EXPLORATION and PRODUCTION INC.(SINGAPORE) Project under SHELL VITO/WHALE : UT Cross Checking Pontoon, Column and Top side structure and Piping and Pressure Vessel, Review the Radiography Film Interpretation for structural as per APIN RP 2X and Piping an per B31.3. Daily routine surveillance inspection of upstream and downstream of piping and Pontoon, column, TOPSIDE structure and helideck structure

As a QC-PIPING INSPECTOR cum NDT SUPERVISOR for client such as SAIPEM, Kombo Project FPSO-Kombo North and South Project under the scope of fit up and visual inspection of piping and structure, line walk hull and top side piping, witness of hydro test and flange management,UT Cross Checking Turret, Hull and Structural and Piping,Review the Radiography Film Interpretation as per AWS.D1.1(STRUCTURAL) and Piping (B31.3&b31.8) daily routine surveillance inspection of NDT.

As a QA/QC WELDING INSPECTOR for client such as SBM OFFSHORE, FPSO-Cidade-De Marica & Saquarema and FPSO STONES Project under the scope of Turret structural inspection and top side process piping system, daily routine surveillance inspection, monitor WQT, welder and welding operator process, review the materials cert and RT Film, Clear the Punch item, witness by NDT and Hydro test

As a QA/QC Piping inspector for client such as JACOBS ENGINEERING, EVONIK INDUSTRIAL – ME5 PROJECT under the scope of Mechanical Equipment pre-installation, elevation/alignment, witness of material verification, Piping welds, welding & repair Procedure/Qualifications, Welder Qualifications, Ensure NDT Requirements, Fabrications Tolerances, Dimensional inspection, Installed Equipment and motor, check level, Primary alignment and Finial Alignment as per the Specification, Review the Radiography film interpretation, witness hydro testing and pre-commission

As a QA/QC Piping Inspector for client such as SHAW & WEBSTONE ASIA INC. in Singapore Parallel Train Olefins Recovery Project (SPT) under the scope of witness of material verification, Piping welds, welding & repair Procedure/Qualifications, Welder Qualifications, Ensure NDT Requirements, Fabrications Tolerances, Dimensional inspection, Installed Equipment and motor, check level, Primary alignment and Final Alignment as per the Specification, Review the Radiography film interpretation, witness hydro testing and pre-commission

As a QA/QC Piping inspector for client such as MITSUI ENGINEERING CO LTD in the project of Singapore Parallel Train Olefins Furnaces Project (SPTOF) under the scope of witness of material verification, Piping welds, welding & repair Procedure/Qualifications, Welder Qualifications, Ensure NDT Requirements, Fabrications Tolerances, Dimensional inspection, Radiography Review, and other Records of the project

QC -NDT inspector for client such as SHAW GROUP INC. If the location is DIEGO GARCIA (BRITISH INDIAN OCEAN) under the scope of material inspection, witness of WPS & PQR Consumable inspection, fit up inspection, Visual inspection & supplementary requirement such as PMI, Ferritic, Hardness, PWHT, Free iron test & Hydro test

As a client representative for CB & I AT SHELL ECC (Ethylene Cracker Complex) at Pulau Ular Island in Singapore, involved in material inspection for Pipes, Fittings, Flanges, Valves, Spectacle blinds, Spades, Spacers and Scope of inspection includes Mill test compliance with reference to mechanical test, Chemical test analysis & supplementary requirements such as Metallographic, Hardness, PWHT etc.., as per ASTM standards as well as SHELL Spec.

As a Piping inspector for client such as Blue Water Energy Services B.V Netherlands under the scope of material inspection, witness of WPS & PQR Consumable inspection, fit up inspection, Visual inspection & supplementary requirement such as PMI, Ferritic, Hardness, PWHT, Free iron test Hydro test

CARRIER DETAILS

Period : JULY 2024 to STILL DATE

Client : SHELL OFFSHORE INC

Designation : NDE CROSS CHECKER

Project : SHELL- SPARTA FPU PROJECT ( MEGA SHIPYARD-SEATRIUM)

UT Cross Checking Pontoon, Column and Top side structure TKY Joints

Review NDT such as MT, RT,UT,PT as per SHELL DEP requirements.

Review and approval the NDT weld map according with SHELL approved AFC drawing specifications

UT Cross Checking Pontoon, Column and Top side structure TKY Joints

Review the Radiography Film Interpretation as per API RPI 2X for structure and Piping B31.3 for piping .

Daily routine surveillance inspection of NDT inspection for, hull structure and top side structure, pontoon, and column to coordination with NDT team

Contact pre training program to NDT technicians and explaining the code requirements an as per project specification

Contact the mock up to qualified to NDT technicians

Review vendor document such as NDT weld map and procedure meet as per SHELL DEP project specification

Review PWHT,HARDNESS and ferrite Reports

Period : SEP 2022 to JUNE 2024

Client : SHELL,SBM,EXXON,CAMSRON -SLB

Designation : THIRDPARTY /VENDOR INSPECTOR

Project : SHELL PHASE 4 GUMUSUT/Malikai/ Exxon-YELLOWTAIL/Exxon- URAU

Inspection Authorization to Assembly (ATA) and Witness of FAT For Acceptance Testing In additional to check Final Factory Inspection MGV, ROV Tree Cap & Tubing Hanger Cohke and Tensioner Cylinder

Activity Conducted: ATA (Authorization to Assembly

Activity Conducted: FAT Stage

FFI (Final Factory Inspection)

Piping - Fabrication/Construction/NDT/ Hydro test / Pre-Commissioning.

Flange management - Flange bolt up / Controlled-torque bolt up.

Valve Inspection: Shell test, Backseat test, Visual examination of castings, High-pressure pneumatic shell test, Hydraulic Actuator test,

Study of engineering drawing P&ID, ISO Matric and weld map carry out to fully utilize & define Requirements for Marine & Topside Piping systems, module pipelines, especially in golden joints in piping system mark-up and follow-up fit-up, root, hot-pass and followed required NDT methods to monitoring connection in topside modules special support attached at structural builds, integration to vessels instruments.

Specialist in fabrication and installation of Topside Modules, Piping & fittings MVR, fit-up, visual, line check, Hydro/pneumatic test as project spec, flange management, reinstatement, color-coding, punch-list clearing etc.,

Assembling Piping and Equipment’s installation according to projected spec tolerance.

Flange management as per approved arrange torque values various piping systems (Fresh water, closed drain, chilled water, dry air, diesel oil, drinking water, hot water bilge, service air, vent, domestic sewage etc.,

Verified calibration for gauges and torque tools and maintain the records.

Equipment’s end connection and valve connections with various piping systems to tight and add to correct valve tags and color codes as per project spec.

Period : 13/Aug /2018 to 30/Aug/2022

Client : SHELL INTERNATIONAL EXPLORATION and PRODUCTION

Designation : NDE CROSS CHECKER

Project : SHELL- VITO/WHALE FPU PROJECT

UT Cross Checking Pontoon, Column and Top side structure TKY Joints

Review NDT such as MT, RT,UT,PT as per SHELL DEP requirements.

Review and approval the NDT weld map according with SHELL approved AFC drawing specifications

UT Cross Checking Pontoon, Column and Top side structure TKY Joints

Review the Radiography Film Interpretation as per API RPI 2X for structure and Piping B31.3 for piping .

Daily routine surveillance inspection of NDT inspection for, hull structure and top side structure, pontoon, and column to coordination with NDT team

Contact pre training program to NDT technicians and explaining the code requirements an as per project specification

Contact the mock up to qualified to NDT technicians

Review vendor document such as NDT weld map and procedure meet as per SHELL DEP project specification

Review PWHT,HARDNESS and ferrite Reports

Period : 18/May/2015 to June 2018

Client : Saipem S.p.A.

Designation : QC-PIPING INSPECTOR cum NDT SUPERVISOR

Project : Kaombo North and South FPSO

Reviewing the Piping /Hull /Turret Quality control NDT documents (Inspection test plan, NDT test plan, NDT Procedures, technique sheet to align with Project requirements

Review the piping test package, line walk before hydro test, witness hydro test, reinstatement line walk, mechanical completion, ITR completion and final documentation of structural and piping.

UT Cross checking at Hull and topside Structural and Piping as per AWS D1.1 and B31.3

Through study of project specification, contract document and Scope of work, project-based procedures for Hull, Piping, Top side Modules & Turret

Quality control NDT monitoring & Witness of various on-board piping system (Marine and Top side & Turret systems) during Spool fabrication, assembly and installation,

Quality control NDT monitoring & Witness of various Hull/Turret fabrication & other structures during sub-assembly and installation

Visual inspection of piping /Hull & Turret structures and ensure compliance as per standard, Project specification.

Interpretation of drawing (Structural, P&ID, Weld maps & Isometric) for welding details, material Category to ensure NDT completion as per required extent

Conduct ITP inspection and surveillance activities at the various workshops and site, review and comment on the inputs and outputs from contractors’ inspection & surveillance programs.

Ensuring all the Measuring & monitoring tools and equipment’s, NDT equipment’s having valid certificates for maintenance / calibration

Ensuring the shipyard NDT technician are qualified & certified for the assigned NDT task

Raising and solving all the issues related to welding integrity (NDT) & other process together with shipyard QC inspectors

Preparation of Daily /weekly report of activity and send it to the Quality lead for reference and follow up

Reviewing and endorsing all the fabrication & in process inspection documents from initial inspection till final acceptance of the piping system & Structural such as, NDT reports (UT, MT, RT & PT), Hardness reports, PMI reports, Thickness gauging reports etc

Interact with shipyard Quality control inspectors to meet the project requirements and ensuring compliance to project specification /standards.

Radiographic film interpretation of piping and Structural Weld Joints. Follow up penalty for repairs welder, ensuring system in place for repair weld as per repair Welding procedure.

Period : March 2014 to17/May/2015

Owner : SBM OFFSHORE

Designation : QC WELDING INSPECTOR

Project : FPSO-Cidade-De Marica & Saquarema and FPSO STONES

Duties and responsibilities -:

Project under the scope of top side process piping system, daily routine surveillance inspection, monitor welder and welding operator process, review the materials certificate.

Monitored welding consumable control and its storage at construction site and sub contractor’s fabrication shop, In accordance with manufacture approved procedures.

Carried out fabrication inspection, Fit up, dimensional survey of piping spool and visual inspection as per approval ISO drawing.

Verify pre heat temperature, inter pass temperature, welding techniques as per WPS and Monitoring Welding Parameters, Position, Welder Qualification as per approved WPS

Verify Post weld heat treatment & Monitoring Heat Straightening as per approved Procedure

Review the Radiography Film Interpretation as top side Piping as per B31.3

Review welder qualification test WQT, RT FILIM as per ASME SEC.IX

Reviewing and endorsing all the fabrication & in process inspection documents from initial inspection till final acceptance of the piping system & Structural such as, NDT reports (UT, MT, RT & PT), Hardness reports, PMI reports.

Coordinating with engineering and construction and liaise with the client detail engineering requirements

Review of Material, Welding and NDT traceability as per specification and approved to Hydro Test Package Witness Flushing and Cleaning of Piping system

Walkthrough and QC Punch listing prior to hydro test. Witness Flushing and Cleaning of Piping system. Gasket verification, Bolt torque tightness witnessing, High point & Low point checking.

Radiographic film interpretation of piping and Structural Weld Joints. Follow up penalty for repairs welder, ensuring system in place for repair weld as per repair Welding procedure

Period : July 2013 to Feb 2014

Client : JACOBS ENGINEERING

Designation : QA/QC PIPING /MECHANICAL INSPECTOR

Project : EVONIK INDUSTRIAL – ME5 PROJECT, JURONG ISLAND

Responsible for all the quality related aspects in the project for Mechanical Equipment installation, Welding, NDE, Piping, Structural, Equipment’s, and assisting Construction Manager.

Equipment receiving, storage and preservation, pre-installation, elevation/alignment, internal installation and tray leak testing, flange joint-gasket verification and bolt tightening and vessel closure inspection as per ITP, Inspection checklist, Material System Specification, Engineering Standard and Process Industry Practices.

Updating equipment daily installation/alignment status and preparing daily progress report for weekly and monthly progress meeting.

Attending weekly logbook entry and NCR meeting with client and field engineering.

Witnessed of PQT, WQT, Hydrostatic test, leak test and air test, bolt tightness

Witnessed and involving All those Mechanical inspection, installation, and completion activity Pipe joint fit-up and dimensional checking as per latest isometric drawing and relevant WPS.

Piping spools erection and checking for alignment, slope and orientation.

Walkthrough and QC Punch listing prior to hydro test. Witness Flushing and Cleaning of Piping system. Gasket verification, Bolt torque tightness witnessing, High point & Low point checking.

Preparation and review of Hydro Test Package and witness of Hydrostatic test.

Verification of Calibration certificates for Pressure Gauges, Manifold and Relief Valve etc.

Period : JAN 2011 to June 2013

Client : SHAW STONE & WEBSTAR ASIA INC... / CB&I

Designation : QA/QC PIPING INSPECTOR

Project : SINGAPORE PARALLEL TRAIN OLEFINS RECOVERY (EXXONMOBIL CHEMCAL)

To inspect the fabrication packages, Piping spool and structural fabrications and materials criticality assessment process, attend kick off meetings and conduct surveillance/verification activities as determined by the owner ITP

Preparation, qualification, and monitoring of WPS, PQR, WPQT

Consumable control and documents control for daily inspection activities

Witness of supplementary requirements such as Hardness, PWHT, PMI, FERRITIC, FREE IORN TEST, HOLIDAY FREE

Review and approve of test pack documents. Record and manage the project data

Radiography film viewing and interpretation as per codes

Interpretation of NDE reports

Review and approval of NDT reports like MT, PT, UT, RT report

Issuance of punch list on defective and outstanding piping and related structural mechanical works

Monitoring project quality activities in accordance with project spec, class requirements/international standards

Review hardness test, PMI, and Ferrite test

Prepare Hydro test line walk and punch list preparation

Witness Hydro testing &pneumatic testing

Reinstatement line walk and punch list preparation

Attend daily toolbox meeting, day to day production meeting and weekly safety briefing

To inspect the upstream and downstream of the flange face. And gasket

Witness of installation the strainer and box up

Witness the flange box up, critical flange and orifice flow element

Witness and review pump/motor coupling alignment (both axial & radial) inspection and reports

Coordinating with client in all aspect regards to quality control/quality assurance issues

Liaise with client for improvement/ development of the quality control plan and field activities

Period : NOV 2009 to Dec 2010

Owner : EXXONMOBIL

Client : MES (MITSUI ENGINEERING SHIPBULDING CO... LTD)

Designation : QA/QC PIPING INSPECTOR

Project : SINGAPORE PARALLEL TRAIN OLEFINS FURNACE PROJECT

To inspect the fabrication packages Piping spool and structural fabrications and materials criticality assessment process, attend kick off meetings and conduct surveillance/verification activities as determined by the owner ITP

Preparation, qualification, and monitoring of WPS, PQR, WPQT

Consumable control and documents control for daily inspection activities

Wittiness of supplementary requirements such as Hardness, PWHT, PMI, FERRITIC, FREE IORN TEST, HOLIDAY FREE

Review and approve of test pack documents. Record and manage the project data

Radiography film viewing and interpretation as per codes

Interpretation of NDE reports

Review and approval of NDT reports like MT, PT, UT,RT report

Issuance of punch list on defective and outstanding piping and related structural mechanical works

Monitoring project quality activities in accordance with project spec, class requirements/international standards

Review hardness test, PMI, and Ferrite test

Prepare Hydro test line walk and punch list preparation

Witness Hydro testing &pneumatic testing

Reinstatement line walk and punch list preparation

Attend daily toolbox meeting, day to day production meeting and weekly safety briefing

Witness and review pump/motor coupling alignment (both axial & radial) inspection and reports

Coordinating with client in all aspect regards to quality control/quality assurance issues

Liaise with client for improvement/ development of the quality control plan and field activities

Period : DEC 2008 to NOV 2009

Client : SHAW GROUP INC

Designation :QA/QC & NDT INSPECTOR

Project : POL CAUSEWAY & PIER (DIEGO GARCIA BRITISH INDIAN OCEAN)

Duties and responsibilities -:

Material inspection with respect to identification of material grade, heat number verification dimensional tolerance, surface profile and other traceability requirements such as color coding, tagging etc… based on ASME B31.1

To oversee QA/QC Day-to- day activities like raw material verification, structure, piping fit up visual inspection for weld joints, NDE activities and documentation of construction

To continuously monitor workmanship, provide support and perform discipline surveillance audits that assure compliance with project contract specifications codes, standards, and procedures.

Review the piping test package, line walk before hydro test, witness hydro test, reinstatement line walk, mechanical completion, ITR completion and final documentation of structural and piping.

Evaluates the welders’ qualifications test, procedure qualification tests of and nondestructive test –NDT technicians regarding the activities assigned

Monitor the quality control function/activities of a project or its parts, including quality control inspection schedule and the review and approval of all offshore quality records

At all times promote HSE practices and procedures, and ensure contractor and workforce fully implement/understand all safety requirements

Witness magnetic particle testing, liquid penetrate test, PMI for SS and alloy steels as per standards

Monitor, review and formally report the project of QA/QC Manager, QA engineer with respect to contractors ITPs, NDT results, NCR audit follow up actions etc

Period : MARCH 2008 to SEP 2008 (SGS TESTING SERVICES CONTROL, Supply to CB&I)

Client : CB & I SHELL ECC

Designation : QA/QC INSPECTOR (MATERIAL INSPECTION)

Project : Ethylene Cracker Complex

Duties and responsibilities -:

Raw material inspection on Duplex stainless steel, SS pipes, Carbon steel pipe, Fittings, PE-materials, GRE pipes, plates, Forgings, Casting, Welding,Painting consumable and equipments are in compliance with specified requirements and project specification

In-charge in controlling of all materials, temporary, permanent, consumables, tools, spare parts, etc

In-charge of all incoming and outgoing materials.

Inspect the qualities and quantities of materials if it conforms to the packing list.

Preparation and submittal of "Materials Receiving Reports", “Overage, Shortage and Damage Reports “and "Material Exception Reports".

Perform preservation of various type of equipments, such as Pumps, Engines, Compressors, etc. based on Manufacturers/Suppliers specific storage recommendations and maintenance instructions.

Supervising warehouse activities such as receiving and issuing of materials.

Witness mechanical destructive tests, Welding Procedure Qualification (PQR) & Welder Qualification Test (WQT)

Monitoring project quality activities in accordance with project spec, class requirements/ international standards.

Monitoring the subcontractor’s work activities for compliance with project quality requirements,

liaise with classification society / inspection personnel for all inspection activities. Conducting quality audit, verifying, and suggesting for corrective & preventive actions.

Period : NOV 2007 to MARCH 2008

Client : BLUE WATER ENENGY SERVICES B.V NETHERLANDS

Designation : QA/QC PIPING INSPECTOR

Project : AOKA MIZU FPSO

Duties and Responsibilities: -B

Welders Qualification, Fit-up, Welding, Visual, NDT (RT, UT, PT, MT, VT, RI) and Destructive Test and Heat Treatment as per Procedures and acceptance as per codes and standards

Dimensional Control, Line Checking, Punch listing and clearing of mechanical,

Material Traceability for steel structures, Piping as per traceability procedure and project specification

Inspection of Equipment installation as per Drawing and Specification.

Carry-out Air test, Hydro test, Chalk Test & Flood test for Cargo tanks

Coordinating the construction activities, on site for pipe plants,

Pipelines (offshore), prefabrication of pipe spools, steel structures

(Fabrication and erection) and storage tanks (erection and maintenance)

offshore platforms.

Welding and piping inspection of process piping stainless steel, carbon steel lines, HP/LP gas top side modules piping, tie-ins, run pipes in “AOKA MIZU FPSO”

Witnessing and approval of welder qualification test, procedure qualifications test

Carry out inspection on FPSO mechanical equipment installation with piping lines and reinstatement check

Observes testing of pipelines, tanks, decks and compartments for strength of material and water- air tightness

Ensuring that the raw materials/welding and panting consumables/materials/equipment’s are following specified requirement and project specification. Interpretation of radiography films and final approval

Monitoring project quality activities in accordance with project spec, class requirements/international standards

Conduct ITP inspection and surveillance activities at the various workshops and site, review and comment on the inputs and outputs from contractors’ inspection & surveillance programs.

PERIOD : March’2007 to Oct 2007

POSITION : QA INSPECTOR

CLIENT : KEPPEL FELS OFFSHORE LTD (BEHALF OF ROYSCAN ENGINEERING)

PROJECT : MAERSK B273, B274

Welders Qualification, Fit-up, Welding, Visual, NDT (RT, UT,PT,MT,VT,RI) and Destructive Test and Heat Treatment as per Procedures and acceptance as per codes and standards

Dimensional Control, Line Checking, Punch listing and clearing of mechanical,

Material Traceability for steel structures, Piping as per traceability procedure and project specification

Inspection of Equipment installation as per Drawing and Specification.

Carry-out Air test, Hydro test, Chalk Test & Flood test for Cargo tanks

Coordinating the construction activities, on site for pipe plants,

Pipelines (offshore), prefabrication of pipe spools, steel structures

(Fabrication and erection), storage tanks (erection and maintenance)

Offshore platforms.

Coordinating production, engineering, and QA. QC inspectors’ teams Issuing of technical and control procedures

Implementing the Quality Systems and carrying out of the requested

number of inspections as per the Inspection and Testing Plan.

Working on tender documents for several projects

Preparation of the Final As-Built Dossier

Pre commissioning / Commissioning

Conduct ITP inspection and surveillance activities at the various workshops and site, review and comment on the inputs and outputs from contractors’ inspection & surveillance programs.

PERIOD : July’ 2006 TO March’ 2007

POSITION : QA/UT INSPECTOR

CLIENT : KEPPEL SHIPYARD LTD(BEHALF OF ROYSCAN ENGINEERING)

PROJECT : PETROBRAS – 53

Responsibilities :

Worked As QA Inspector (Structural & Piping) In Superstructure, Main Deck Under stool, Bogie support, Turret Integration, and accommodation Structural

Inspection welds joint preparation, fit-up, dimensional inspection & alignment from panel level to block sub-assembly and to the final block assembly

Material control/identification and test certificate verification in piping

Final weld surface visual examinations

Witnessing leak tests.

Third party inspection of Ultrasonic testing on structural and piping

Ensure/control all NDT work are strictly adhered to procedures

Review Drawing and specification

PERIOD : February 2005 to July 2006

POSITION : QA/QC INSPECTOR

CLIENT : JURONG SHIPYARD PTE LTD(BEHALF OF ROYSCAN ENGINEERING)

PROJECT : INDEPENDENCE HUB

Responsibilities :

Worked As QA Inspector (Structural & Piping) in deep Driller (IHB-1074)

Material control/identification and test certificate verification in piping

Inspection welds joint preparation, fit-up, dimensional inspection & alignment.

Final weld surface visual inspection

Tracking and recording welder’s performance through visual and NDT reports Review / Witness welder qualification test

Review Drawing and specification

Review Radiography films

PERIOD : Sep 2004 TO Jan 2005

POSITION : QA INSPECTOR

CLIENT : KEPPEL FELS SHIPYARD LTD. (BEHALF OF ROYSCAN ENGINEERING)

PROJECT : B 278 RIG

Responsibilities :

1.Through study on various structural drawing & Piping Systems

2.Executive inspections during fabrication of the QC activities are listed below.

Inspection carried out Fit & Visual Inspection

Identification of material and stamp transfer.

Weld joint preparation (Shape and dimension)

Fit Up and tack welds.

Review NDT Test Reports, Dimension Reports and Document control

During welding, check correct usage of welding parameters.

After completion of welding visual check for welding defects to arrange NDE inspection Like UT, RT, MT, PT & PWHT as per WPS.

Estimate the Manpower, Prepare working schedule

Inspect the Air Test, Structure Test, Leak Test, Vacuum Test & Piping Hydro Test.

Clear the Punch List & Maintain the Summary

PERIOD : May 2003 TO Aug 2004

POSITION : QA/QC INSPECTOR

CLIENT : MMH.SDN BHD - MALAYSIA (BEHALF OF ROYSCAN ENGINEERING)

PROJECT : FSO-NKOSSA-1

Responsibilities :

Carried out Welding Inspection on different Structural and Piping

Review / Witness welder qualification test

Review Drawing and specification

Review Radiography films

Carry out visual inspection and dimensional checks

Review / Witness NDT test reports

PERIOD : May ‘2002 to Apr 2003

POSITION : NDT INSPECTOR

CLIENT : HUB SHIPPING SDN BHD (BEHALF OF ROYSCAN ENGINEERING)

PROJECT : HIBISUCUS, HUB LADER, HUB ACHIVER, SAIPAN STAR, SAIPAN CARRIER

Responsibilities :

Ultrasonic thickness gauging on structural and piping

Ensure/control all NDT work are

Contact this candidate