Welding Inspector Front End
Resume:
Robert Stashak
*** ****** ****, ***********, ** *7110
******.*******@*****.***
I have been a welding Inspector for 8 years and a welder for 30 years. Experience in testing welders and set up procedures. Have worked with power point and office. Experienced in completing redlines. Worked on tie-ins and lowering-ins. Hydro testing main lines and fabrication.
Certifications :
API 1169
NEI', 40-Hour Worker Programs- HAZWOPER, [29CFR1910.120] OSHA 30
Senior Welding Inspector, 12/2019 to Current
Williams Chatham, VA
Inspected at station #165 in Chatham VA . Tested welders Senior Welding Inspector, 02/2019 to 12/2019
Williams Roseland, NJ
I was Senior Welding Inspector over fabrication and installation at Patterson NJ and Roseland NJ and Station 303 also located in Roseland NJ.
Tested welders, red-line, as-built drawings .
Welding Inspector, 11/2018 to 01/2019
williams Company /QIS Manassas, VA
Welding inspector,
Welding Inspector, 11/2017 to 11/2018
QIS/Willaims Factoryville, PA
Evaluated work against design specifications.
Administered tests to welders to assess understanding of the work and applicable code requirements.
Tracked information and authored daily reports.
Stayed up to data on current state, federal and codes. Applied changes requested by designers, owners or inspectors. Welding Inspector, 09/2017 to 11/2017
QIS/ Wiliams Company NY
Administered tests to welders to assess understanding of the work and applicable code requirements.
Evaluated work against design specifications.
Welding inspector in LMC Fab shop
SUMMARY
EXPERIENCE
Welding Inspector, 08/2016 to 08/2017
QIS/Williams Manassas, PA
Evaluated work against design specifications.
Administered tests to welders to assess understanding of the work and applicable code requirements.
Tracked information and authored daily reports.
Stayed up to data on current state, federal and codes. Applied changes requested by designers, owners or inspectors. Welding Inspector, 03/2016 to 08/2016
Spectra Energy Peekskill, NY
Evaluated work against design specifications.
Evaluated work against design specifications.
Stayed up to data on current state, federal and codes. Tracked information and authored daily reports using Welding Inspector, 01/2015 to 02/2016
Williams /QIS Long Pond, PA
Was responsible for testing of welders and supervising welders on the ROW and in Fabrication.Before welding started I supervised the unloading of 42" pipe and observed the cutting of the tree line on the Franklin loop .Kept weld information for the mainline and made all of the weld maps. Worked on hydro testing and fabrication. Welding Inspector, 06/2014 to 12/2014
Williams/ QIS Lancaster, PA
Responsible for visual inspection of welds in fabrication and tie-ins, Testing of welders,. Worked on 5 different valve settings at 5 different locations. prepared redline on all locations.
Power point and office.
Lead Welding inspector, 11/2013 to 06/2014
STS Kermet, TX
Welding inspector for STS in Odessa Texas. Working on tie-ins and lowering in pipe.Observing contractor jeeping pipe . Working on firing line and front end on main line. Welding Inspector, 08/2013 to 11/2013
QIS/ Kinder Morgan Carrolton, Ohio
Welding Inspector working on hydro-test of 180 miles plus valve settings on 26 inch mainline from Carrolton Ohio to Albany Ohio. Working with chief Inspector on red line and also hydro reports.And close out boxes.
Lead Welding Inspector, 03/2013 to 08/2013
QIS/ Williams pipeline Long Pond Twp, PA
worked on a 42 " Palmorton loop job for chief Inspector Ronald Coker where I attended pre-job meetings.
I am the lead inspector and had two inspectors to delegate work to. Tested 40 welders to API 1104 SMAW code.
Visually inspected welds and monitored preheating before and after welding. Transferred and recorded pipe specification numbers off of pipe. Filled out and recorded all welding certificate papers on the job. Tested welders on the automatic welding procedures FCAW code. Certified welders on multi weld repair certification procedures and split tee procedures. Worked with fabrication foremen on fabrication prints. Made red line drawings for fabrication and mainline .
Welding inspector, 02/2013 to 03/2013
QIS / Williams Long Pond, PA
Worked for cheif inspector Joe Dynda over spread 16. Assisted Todd Clack on testing welders on API 1104 SMAW code.
visually inspected welds, monitored preheating before and during welding. Transferred and recorded pipe specification number off pipes.
Welder and Fabricator, 02/2012 to 02/2013
S-con Bryan, TX
Pipe fabrication and welding, stick rod, tig, carbon and stainless. Consistently assumed additional responsibilities and worked extended hours to meet project deadlines.
Welded in flat, horizontal, vertical and overhead positions. removed and repaired unacceptable welds with an air arc and grinder to meet quality guidelines. Worked with gas tungsten arc,gas metal arc,flux-core arc, plasma arc, shielded metal arc, resistance welding and submerged arc welding.
Fabricated shop parts directly from blue prints.
Used MIG gun arc to melt and deposit metal from electrode to work pieces. Pipeline Welder, 03/2011 to 12/2011
snelson San Jose, CA
welded carbon steel and hydrotested 36 inch pipe on pipeline for PG&E. Welder and fabricator, 09/2010 to 03/2011
snelson Fresno, CA
Welded and fabricated and installed fabrication.
Pipeline Welder, 06/2010 to 09/2011
Rockford Sacramento, Ca
Welded on the firing line and also did tie-ins and fabrication. Welder fabricator, 04/2009 to 06/2010
SCON Bryan, TX
Pipe fabrication and welding stick rod, tig, carbon and stainless. Welder fabricator, 04/2009 to 06/2010
SCON Bryan, TX
Pipe fabrication and welding stick rod, tig, carbon and stainless. API-1104 CWI Certified with Williams .
OQ's
CBT's
Able to lead and delegate work
Certified Welder
Structural Welder
Fabrication of pipe
Read and work off blue prints
30 years in welding and Fabrication trade.
specializes in working with Carbon and all
Alloys
Available to work in remote locations for
long periods of time.
Expertise in wire feed machines
Manual dexterity
HIGHLIGHTS
MIG Welding professional
Welding, 1984
San Jac Laporte, TX
EDUCATION
Contact this candidate