Project Management Manager

Resume - Philip R. Juneau

Address **** *. **** ******, #*

Chicago, IL 60657

Phone (mobile) +1-631-***-****

Nationality United States of America

e-mail ****.******@*****.***

LinkedIn profile https://www.linkedin.com/in/philip-r-juneau-bb2227/ Biography

Seasoned engineer and MEP (Mechanical, Electrical) Project Manager with over 30 years of experience in Mechanical: HVAC equipment, distribution and end-device controls, both Air- and Hydronic-Systems, and Electrical: low- and medium-voltage distribution plan & specification and design & build projects ranging from $2 to $20M, both working directly for and under direction of General (GC) and Mechanical Contractors. Demonstrated expertise in commercial contract management with proficiency in regulatory compliance (Sarbanes-Oxley). Practical application of mechanical and electrical project management, additionally including proficiency in the design and specification (Division 23, 25 and 26) and creating and executing their respective subcontracts. Specializing in HVAC and Electrical systems both at equipment and system level with specialization in field- and automation-level design, specification, programming, project execution, commissioning and integration of building technology systems (i.e., building automation and controls)/SCADA). Over 30 years working in High-Tech market segments such as Data Centers, R&D Facilities, Life Sciences (Pharma, Biotech), High-Tech Manufacturing including several years executing guaranteed performance contracts.

Core Competencies

• Project Management (Building Technology): Mechnical (HVAC) project management experience, including the design/offer support, project review, project charter development and the successful project execution of both HVAC Air- and Hydronic-equipment, distribution and end-device installation, together with Electrical: low- and medium-voltage systems, including their respective controls (Building Automation & Control Systems (BACS), Electrical Distr. Mgmt. System (EDMS))

• Building SCADA Systems: Proficient in designing and executing both Building Automation and Control Systems (BACS) for HVAC equipment and systems and low- and medium-voltage Electrical Distribution Management Systems (EDMS), with integration experience to unify these systems to provide energy optimization and sustainability on a common SCADA platform across all building technology trades

• Contract Management: Drafting, soliciting and executing MEP subcontracts, including proficiency in aligning the Master Division specifications for 23, 25 and 26 with their respective subcontracts, ensuring compliance and end-to-end contractual conditions to minimize risks and change orders

• Financial Management: Demonstrated expertise in financial and commercial management with proficiency in regulatory compliance (Sarbanes-Oxley). Business responsibility (P&L) for business segments for multinationals and several years of responsibility for $10-$20M projects, with hands-on budgeting, forecasting, and project cost control and risk/opportunity management

• Stakeholder Management: Effective communicator and leader who maintains transparent, trust- built relations with clients, contractors, and agencies to meet project requirements issues swiftly

• Business Tools Proficiency: Proficient in Microsoft Office 365, Asset Suite 8, and building energy management systems (BEMS), supporting efficient project execution and data management Education

• BS, Electrical Engineering Technology, Northeastern University, College of Engineering, Boston,MA Certifications & Training

• Siemens AG: Finance and Controlling Excellence, Project Management at Siemens (PM@Siemens)

• Comprehensive training in HVAC Systems and Applications, Energy and Sustainability Engineering, and BACS platforms (Siemens, Honeywell, JCI, ABB and other legacy systems) Summary

Resume – Philip R. Juneau Page 2 of 4

Professional Experience

CAT Consulting*, Chicago, IL May 2024 – Present

Owner/Engineering Consultant Apr 2021 – Mar 2023

Advisory, consulting and contract work for technology firms, start-ups and end-user clients (including product development companies (Silicon Labs) and military (US Air Force). Providing business and technology project management (contract) work ($30M) on their buildings and infrastructure. Current markets served are private equity, technology (R&D), commercial and industrial building owners and Architect & Engineering (A&E) firms, etc. desiring intelligent, cognitive buildings and infrastructure. utility and infrastructure clients, specializing in DER interconnection projects and smart building automation. Key area of expertise is BEMS & SCADA systems and integration, design, specify and execute Building Energy Management Systems (BEMS) and integrating platforms (SCADA level) for comprehensive energy management and system optimization. Key market segments are Data Centers, R&D Facilities, Life Sciences (Pharma, Biotech), Manufacturing, etc.

* - see Client Reference List with project types listed in the appendix Siemens Industry Inc., Buffalo Grove, IL Apr 2023 – Apr 2024 Vice President, Head Business Segment Connected Devices Business Segment profit and loss (P&L) responsibility leading a +$120M business encompassing strategy, marketing, business development, sales, operations (SCM, MFG, SOL, SVC), product portfolio management, technical support, project management and R&D. Main focus areas:

• Building and Infrastructure Field Devices and Connected (Edge) Technology

• Strategy, market and business development (Executive Sponsor for Data Center vertical)

• Product portfolio management and LPM for the following product portfolios:

• IoT Sensors: analog, digital and smart networking devices for HVAC/Lighting/Shading automation

• Actuating Devices: analog and smart networking devices or HVAC industry

• Building Controls: KNX international standard products for HVAC, lighting and window shading

• Networked room automation and HVAC air and hydronic applications (BACnet, KNX)

• Pneumatic actuators and controls (#1 leader in the market) Automated Technology Company LLC, Joplin, MO Oct 2017 – Mar 2021 Project Director, Solutions

Automated Technology Company (ATC), with its HQ in Joplin, MO, is an authorized building solutions provider and master system integrator with manufactures such as ABB, Siemens, Eisbaer, Belimo, MSA Managed smart building automation projects, emphasizing renewable energy integration and open- standard IoT technologies. Responsibilities included:

• Shareholder with main responsibility for the commercial and project execution side of the business responsible for executing the company business plan with strategy implementation. Responsible for business and project development, including strategic partnerships with multinational technology firms, regional installers and real-estate developers

• Complete implementation of Smart/Intelligent buildings using open-standards and platforms (Edge) and IoT/Smart Sensors for a complete system solution

• Designed controls for DER (solar, wind, heat pumps, biomass, etc.) interconnections and controls for optimized building performance and energy management strategies

• Acquired and fostered senior level relationships with customers and partners Resume – Philip R. Juneau Page 3 of 4

ABB Asea Brown Boveri Inc., New York, NY Sep 2016 – Sep 2017 Project Director, NAM Building Solutions

ABB is a leader in power and automation technologies that enable utility and industry customers to improve their performance while lowering environmental impact. The ABB Group operates in around 100 countries and employs about 145,000 people with a total revenue of $33.8B in 2016.

• Direct report to the Executive Vice President, Electrification Products (EP) Division North America

(NAM) and functional report to the Sr. Vice President, Global Product Group (GPG) Building Automation (EPBP BA)

• Responsible for business and project development and execution of ABB Smart Building Solutions

• Leading strategic projects in ABB Smart Building Solutions via the pull through of Divisional channels across all low voltage Business Units (BU) as part of digitalization offering, ABB Ability™

• Acquiring and fostering senior level relationships with customers and partners ABB Asea Brown Boveri Inc., Zürich, Switzerland Apr 2013 – Aug 2016 Head of Solutions Development, Building Automation

• Directly reported to the Group Vice President, Global Product Group (GPG) Building Automation

• Develop and implement the global solutions strategy for Building Automation driving business targets for the PG in strategic countries i.e., Local Business Units (LBU)

• Responsible to support a $180M business, developed a project business volume of $20M over 8 countries in EMEA

• Business development support (including M&A) for the GPG in the Building Products unit; key target areas were HVAC automation, smart controller (Edge) and sensor (IoT) technology

• Led the building automation M&A for the business unit through 3 pre- and 2 complete due diligence processes, eventually leading to the acquisition of Cylon Controls

• Acquiring and fostering senior level relationships with customers and partners Additional Relevant Experience, International/National (USA) Jun 1992 - Feb 2013 Senior operational roles in project management, operations, project development and engineering at Siemens, Johnson Controls (JCI), Honeywell, ABB from 1993-2013, respectively, focusing on energy- efficient solutions, building automation, and performance contracting projects for international clients in the high-tech market sectors of buildings & infrastructure. Internships and Field Experience

• Massachusetts Electric, Inc., Project Engineer, Malden, MA 04/89 - 06/89

• Anheuser-Busch, Inc., Project Engineer, Merrimack, NH 01/88 - 12/88

• Klockner Moeller, Inc., Design Engineer, Natick, MA 01/87 - 06/87

• Reilly Electric, Inc., Apprentice Electrician, Manchester, NH 06/86 - 09/86

• Longchamps Electric, Inc., Apprentice Electrician, Manchester, NH 06/85 - 09/85 Memberships

• IEEE: IEEE Membership# 100234800; http://www.computer.org

• PMI: Longstanding adherence to the Project Management Institute (PMI) and its PMP certification Resume – Philip R. Juneau Page 4 of 4

Client Reference List (CAT Consulting)

This client list is the most recent 2 years of my work experience. I have worked for facility management and engineering companies as well as major utilities in the past on mechanical and electrical renovation and new-installation projects. I have worked on various C&I projects and military installations (e.g., USAF and USACE high-security buildings, medical, office, etc.) for buildings and infrastructure projects over the years. Markets specialized are C&I, High-Tech (Data Centers, Biotech), healthcare, office, residential high-rise and other building markets. King and George, Nationwide – USAF and USACE Buildings and Infrastructure 12/21 -12/23

King & George, LLC (K&G) operates from their Fort Worth, Texas headquarters, with satellite contract support offices nationwide. K&G provides general contracting & construction management, facilities O&M, vehicles & equipment maintenance, call centers, and environmental services. K&G demonstrates a depth and breadth of facility and project management competencies for a wide array of commercial and government clients, including federal agencies such as the USACE, U.S. Air Force, US Navy, the FAA, and the National Oceanic Atmospheric Administration (NOAA. Sr. Technical Project Manager/Director

• Detailed project management execution via updated technical documentation, risk/opportunity management and all financial reporting, accounting, etc. according to PMI

• Mechanical/HVAC and Electrical project design & install for military buildings and infrastructure, incl. critical infrastructure (surveillance, data centers, medical facilities, high-security buildings)

• Detailed commercial and technical procurement of HVAC and Electrical suppliers’ and subcontractors’ scope, submittals, schedules, manpower loading to all project stakeholders

• Managing staff and resources around the accommodation of core air-force military base protocols, procedures and inspection for all building trade projects

• On-site coordination between the different Mechanical/HVAC and Electrical contractors/suppliers

• Implementation of base strategy to migrate to current BACS technology Reading Municipal Lighting Department (RMLD), Reading, MA 04/21 - 6/21

Established in 1894, Reading Municipal Light Department (RMLD) is the largest of the 41 municipal lighting utility departments in Massachusetts serving over 70,000 residents in the towns of Reading, North Reading, Wilmington, and Lynnfield Center. RMLD has over 29,000 meter connections within its service territory.

Utility Engineer and Analyst for Integrated Resources Division

• Provide multiple types of analysis to provide focused views on historical trends (load profiles, regression analysis, etc.), either confirming or repositioning strategic programs; Detailed project management reporting, accounting, etc. according to PMO and PMP

• Develop data models within the entire value chain in municipal energy delivery (wholesale PPA, retail, metering, billing)

• Provided technical support to Operations regarding design and implementation of smart sensing and metering applications, both demand and supply side

• Developed Non-Carbon Certificate reporting and forecasting process based on compliance regulations and RMLD 2050 Plan

• Developed the community outreach program to pro-actively manage the affects of RMLD supply- side capital projects for residents, businesses and other public entities

• Key Account Management (KAM) to the largest RMLD (industrial) client via analysis and consultation of energy

Contact this candidate