Mechanical Engineering Welding Inspector

Richard Ilagan Datinguinoo

Nationality: Filipino Date of Birth: 28Nov1969

Phone Number: +63-905*******, +632-****-****

Home Address: Quezon City, Philippines 1126

Email Address: *******************@*****.***, linkedin.com/in/richard-datinguinoo-23bb2026 Preferred Position: QA/QC Lead/Supervisor, Welding/Piping/Mechanical Inspector, QC Site Engineer Profile:

• BSc graduate with degree in Mechanical ENG & Certified CSWIP Welding Inspector 3.1 for 15 years.

• Experienced Multi Discipline Inspector with more than 20 years of experience in mechanical engineering and quality assurance. Proven expertise in QA/QC, Inspections, supervision and effective communication, ensuring compliance with safety and quality standards. Adept at fostering teamwork and collaboration within diverse teams, driving project success. Committed to continuous professional development and excellence in the field of piping, welding, mechanical and structural inspection. Seeking to share my skills and knowledge in the upcoming role to contribute to high-quality project requirements of the company.

• Worked as PMQ team for some of the top global O&G co. e.g. Qatar Energy, Qatar Petroleum, Shell, ConocoPhillips, BP and some of the leading EPCM co. as QA/QC Lead/Inspector like CB&I, KBR, JGC, and Technip Energies for similar role.

• Employment History:

• Company: Atlantic Gulf & Pacific co. Nov2024 - present Designation: Welding Inspector

Project: SHELL Bamboo Non - Jetty project

• Essential Duties and Responsibilities:

• Ensuring all quality related welding activities for Piping, Mechanical and Steel Structures performed correctly in accordance with approved quality procedures, safety standards, codes, ITPs, and Client (Shell) requirements.

• Review & interpret Engineering/Fabrication drawings to assure proper implementation of project quality requirements.

• Carry-out project material receiving inspections & prepare reports and provide RFI as per Client requirements.

• Ensure proper inspections of lay-out/fit-up, dimensional check and traceability for all materials prior to welding.

• Conduct visual inspections of welding quality during welding operations. Verify welding parameters and consumables during welding process in accordance with approved WPS.

• Verify welders/welding operators are qualified & competent for their job.

• Carry out final dimensional check & visual inspections of completed welds for fabricated pipe spool, mechanical components and steel structures.

• Prepares NDT request for completed welds as required in ITP.

• Ensuring all welding inspections are properly documented and maintain all project quality records up to date.

• Review Test pressure packages and Witnessing pressure testing of Valves and fabricated spools.

• Report to PQM, and coordinate to Clients Inspector concerning RFI, inspections results, and quality issues.

• Provide technical advice to welders and other trades and support to construction group & PMT.

• Coordinate daily QA/QC activities with construction group and other duties as directed by PQM.

• Participate in Weekly Quality meeting, Tool box talks and HSE program of the company.

• Company: Cybalink Solution, Inc. – (CIVMEC Constn. & Eng. Services, Western Australia) Apr2024 - Aug2024 Designation: Project Engineer

Project: Various Brownfield (SMP) project

• Essential Duties and Responsibilities:

• Review ITP’s, Construction Work methodology, method of statement, project procedures, specs, and QA/QC documentation as per ISO9001.

• Prepare and develop MDR work packages.

• Compiling & Submission of Fabrication Work packs into Civtrac system.

• Liaise/coordinate with Site ENG regarding TQ’s, inspections, and project scheduling.

• Prepare weld mapping, weld traceability report & as-built drawings for fabrication works as advice on site.

• Reviewing welding quality documents as required (WPQR / WPS / NDT reports).

• Identification and management of ongoing design changes outside of the contract re-measurement process.

• Prepare ECC report as advice by the manager and assisting project Commercial team with head contract compliance to ensure that notices and claims are communicated within specified time limits.

• Prepare comparisons between contract and as-built structures for possible commercial claims.

• Identify changes in IFC drawings to Contract drawings and prepare cost estimates for the changes.

• Prepare weekly report and keep update TQs and other duties as advised by Lead Engineer

• Ensure the accuracy of completed works always. Provide CIVMEC with the highest standard and quality of information.

• Sets a good example and drives compliance with Company Policies and Procedures.

• Facilitates ad hoc tasks as required by the company.

• Perform other general duties that may be necessary to suit project requirements as directed.

• Company: KBSS Engineering, Western Australia Sept2023-Mar2024 Designation: Quality Advisor/Consultant

Project: Various Brownfield (SMP) project

• Essential Duties and Responsibilities:

• Recommends and provides technical advice regarding the effective implementation of PQM for QA/QC.

• Preparation of project MDR’s, ITP, etc. in accordance with project specs, QMS & ISO9001.

• Establish, coordinate, and improve Co’s compliance activities including developing reporting, procedures, and communications and directly report to OPM.

• Identify opportunities for quality improvement and recommend changes to processes and procedures.

• Provide the necessary support to the OPM regarding quality contractual issues during project execution phase.

• Maintaining accurate and up-to-date company quality records including NCR database, procedures, work method and calibration register to support the Company's overall Quality program.

• Review & approved Project QA/QC document control processes for SMP & Welding.

• Progressive compilation of records for MDR (Final Dossiers). Monitor Welders Qualifications and Validity.

• Ensure all records are maintained for all NDT activities as per Client requirements.

• Coordinate with the site OPM, Inspector, Engineer for any QA documents that must be completed before hand-over to client and works with CSR when required.

• Ensuring all project activities & scope for construction within SMP/W and NDE are all qualified, performed & documented per approved contract specifications & ITPs with a high focus on cost efficient construction.

• Ensure all QA/QC documentation (MDR) is compiled completely prior to client final project acceptance and handover.

• Monitoring thru Site coordinator all fabrication activities within SMP/W and NDE with emphasis on quality, schedule, cost efficiency and HSE.

• Report to overall PM. Complying with Co’s safety policies and safe work procedures and maintain a safe workplace.

• Designation: Freelance Welding Inspector Jan 2022-June2023 Company: Various Agency and TPI

Project: Welders Qualification Testing (WQT) Manila, Philippines

• Essential Duties and Responsibilities:

• Ensure compliance with relevant codes, standards, and regulations during inspections as directed by the Co.

• Coordinate with testing center personnel and ensure proper setup and execution of welding operation during testing.

• Conduct physical inspections of welding preparation, joints, materials, welding consumables and equipment.

• Perform inspections during welder’s testing in accordance with quality standards of the company as advice.

• Monitor welders’ activities and performance during testing.

• Conduct visual inspections for all completed weld test coupons prior to RT examination.

• Assign by the Co’s to review & interpret RT films for completed welds.

• Prepare inspection reports to PQM after completion of WQT.

• Maintain proper documentation of inspections & test results of all welders completed during WQT.

• Company: Technip Energies Mar 2020-Oct 2021

Designation: QC Piping & Welding Lead Inspector

Project: Arctic LNG 2 project

• Essential Duties and Responsibilities:

• Ensure all company's PQMS, plans & procedures are consistent and well implemented for all piping & welding activities conducted as per ITP, codes, and/or project specs & standards.

• Ensuring contractor’s welding & piping work activities on fabrications & site installation in accord to Qlty. requirements.

• Consult with the client & subcontract Inspector for all quality activities.

• Manage/Lead & supervise the team of Welding/Piping Inspectors & coordination to construction group.

• Ensure timely inspections during fabrication & installation activities inline to ITP & WPS.

• Monitor, Hold & Witnessing of critical inspection activities, per ITP.

• Send daily RFI to client & conduct Quality orientation for piping to PMT/QC/Sub-con.

• Perform VI and maintain daily progress reports, manage, and control NDT activities of sub-con.

• Ensuring inspectors surveillance and inspection reports are properly documented.

• Notify PQM of any nonconforming conditions & provide QAI/NCR report if any non-compliance observed at site.

• Provide technical advice to site team to avoid any major quality problems at site.

• Review piping test pack prior to testing. Monitor & maintain record of inspection status of piping test packs.

• Co-ordinate to Client for site inspection and acceptance.

• Final document compilation & submission & get client/surveyor acceptance/approval.

• Attend daily toolbox meeting. Conduct weekly quality walk with client/PMT.

• Actively participate on Co's QAP & safety program.

• Company: RINA Technical Singapore Pte. Ltd. Oct 2019-Dec 2019 Designation: Welding Inspector-TPI

Project: Tangguh LNG Expansion Project

• Essential Duties and Responsibilities:

• Ensuring all project requirements of the Co. conform to applicable code & std's and/or specs during welding activities.

• Conduct/Witnessing sub-con WQT as per ASME IX.

• Carry out fit-up inspections & all welding activities before, during & after welding as per WPS.

• Conducting inspections of consumables to be used for WQT is correct as per approved WPS.

• Monitor welding parameters throughout WQT.

• Conduct Visual Inspections of each completed weld test coupon prior to NDE.

• Close interface with the Sub-con & Client Inspector's representatives during testing activities.

• Assigned by Co to Review and Interpret completed RT films for WQT.

• Submit daily inspection test report to PQM after completion of WQT.

• Support Safety Rules of the Co during testing.

• Company: RSIM Design and Construction Apr2017-Oct2019 Designation: Consultant

Project: Residential and Comm. Bldg. projects

• Essential Duties and Responsibilities:

• Ensuring all projects conform as per design & meet the quality concern of the property Owner/Client.

• Coordinate the method & quality of the const., and monitor the cost & time involved in the project.

• Liaised directly to Site supervisor and Clients/Owner the status of work progress and schedules.

• Implement site Inspections, coordination & progress monitoring during const. stage.

• Monitor performance of const. crew to establish goals & objectives.

• Ensure welders are qualified & competent in their assigned task.

• Ensuring welding Fabrication & installations of steel trusses, beams & channels as per design requirements.

• Ensure installation of Mechanical system and FW lines as per design.

• Manages & inspects the quality of work and conduct/Attend meetings at site if needed.

• Keeping Manager informed of problems & assisting in correcting nonconformance during const.

• Keep accurate progress reports during all stages of the construction.

• Support Co's policy in completing the project on plan & on time. Support safety rules of the Co.

• Company: CB&I Global Operations Intl Pte. Ltd.- Australia Jan2013-Sept2016 Designation: QC Inspector-Welding

Project: Chevron Gorgon LNG Project

• Essential Duties and Responsibilities:

• Ensure the company PQMS requirements are being fully implemented with/within assigned area of responsibility.

• Ensuring all inspection documents are approved at site with Client Inspector for any task completed.

• Closely coordinate with the Client Inspector's for all site inspections and test activities.

• Review & approve each SWHU (Closure weld) Piping Work-Pack with Client Inspector prior to start welding.

• Ensure all welder's qualification record is up to-date and competent on their assigned task.

• Monitoring all welding activities & processes is conducted as per approved WPS & project procedures.

• Conduct fit-up inspections & all welding activities as per WPS (SWHU/Stick built or Site Fabrication).

• Monitor welding parameters & inter-pass temperature is within WPS limits during SWHU (closure weld).

• Witness inspections for each SWHU joint be welded as per Cat-IV and ITP's requirements.

• Conduct VI of all welds (SWHU/Stick Built) as required prior to any NDE.

• Conduct internal inspections of root welding using Borescope for any SWHU.

• Prepare weld report & weld mapping on PQMS for all welds accepted at site.

• Monitor welding repair works conducted as per approved procedure, witness by Client Inspector.

• Verify pre/heating & (PWHT) Temp. recording system is correct.

• Perform PMI & Ferrite test with Client after completion of welding for SS, duplex/super duplex pipe spools weld joints.

• Support to QC supervisors on any quality issues at sites during Inspections.

• Perform other duties as & when required by the QC supervisor.

• Attend daily toolbox meeting in time. Complying with all HSE & QA procedures & policies.

• Company: RasGas (QP) - seconded SPIE Oct 2011- Dec 2012 Designation: Piping / Mechanical Inspector (Static & Rotating Equipment) - PMT Project: Helium two project

• Essential Duties and Responsibilities:

• Ensuring & liaising with contractors for effective and proper implementation of Company’s PQMS, WPS & ITP's etc. during construction stages.

• Supervise subcontractors for work activities during fabrication and site installations.

• Providing QA/QC technical advice to subordinate to make sure inspection done in time as per ITP

• Witnessing Subcon's WQT.

• Oversee and perform various inspections on piping/welding activities, static & rotating eqpt site installations.

• Report to PQM daily inspections and QSR done at site.

• Ensure correct levelling & positioning of eqpt on to the foundations are within the limit of Acc.

• Witnessing Pre & final alignment for rotating eqpt's in accord to ITP, Project and vendors requirements.

• Monitoring installation of Rotating, Static & package type ME.

• Interface with the Quality Lead, project engineer, and other inspectors.

• Performed surveillance for preservation activities is performed in accord Co's requirements.

• Provide report to PMT/QC Lead on any quality issues at site & issue QSR as required.

• Raise QAI/NCR if any non-compliance observed at site.

• Review & conduct line checking, witnessing piping pressure tests.

• Witnessing reinstatement & close out activities of piping systems after completion of test packs and during Comm.

• Conduct Hot Tapping (Tie-in) inspection activities as required.

• Participate on site weekly Quality Walkabout with the Contractor Inspector.

• Signing off the Mechanical Inspection Test Records.

• Conduct final system mechanical completion (SMCC) & prepare punch list & final verification at site for final approval.

• Monitoring inspections, construction, field testing and during mechanical pre-comm phase.

• Assist Comm. group for inspection activities such as flushing/ air blowing, system tightness/leak testing & nitrogen purging of piping systems.

• Witness internal inspections of all Static equipment for final box-up. Support daily HSE Rules of the Co.

• Company: Qatar Gas-seconded SPIE (Qatar Energy) Oct 2006–Feb 2011 Designation: Piping / Welding Inspector - PMT

Project: QG 3& 4 LNG project (QG / Shell / ConocoPhillips)

• Essential Duties and Responsibilities:

• Overseeing/Ensuring EPC daily Piping/Welding activities conforms to Qatar Gas-PQMS requirements, WPS, ITPS', codes & applicable standards are effectively implemented & carried-out throughout construction stage.

• Provide the necessary support to the PQM regarding quality contractual issues during project execution phase.

• Review and witnessing in process & Hold Point inspection during construction.

• Witnessing subcon's WQT & conduct random inspection for any NDE, PMI activities perform at site.

• Verify welders/welding operators are qualified & competent for their job.

• Conduct spot audit for consumables being used at site as per WPS.

• Random check of Piping material/fittings traceability at Shop/Site in accord to PQM requirements.

• Daily Surveillance inspection for all welding & piping related activities before, during & after fabrication & installation works in compliance with relevant WPS & Co’s PQMS requirements.

• Assigned by the Co’ to review & interpret completed RT films.

• Witnessing Pipe bending activities such as visual inspections of production bends, verification of dimensions for completed bends, such as bending radius, length, ovality, bending angle.

• Ensure pre-heating, PWHT and any other testing activities follow CPY's requirements.

• Monitor contractor's Pipe-spool material/fittings traceability being used at Shop/Site, conforms to the PQ requirements.

• Carry-out inspection of pipe supports, Guides, anchors installed on lines & flexibility of lines.

• Review Piping Test packs, conduct line checking & witness pressure tests for AG & UG piping system.

• Liaise to contractor's inspectors for any quality problems raised at site and suggest corrective & preventive actions.

• Interface with the PQM, QCE, inspectors at site.

• Report to PQM/QCE for any Quality Issues & Raise QAI/NCR if any non-compliance observed at site.

• Support Comm team during Project Completion phase.

• Support Company’s project schedule & participate in Co’s (IIF) program & all other HSE policies daily.

• Company: British Petroleum (BP) Mar2005 -June2006 Designation: QC Welding Inspector - PMT

Project: Shah Deniz -Topside 500 project (Onshore/offshore)

• Essential Duties and Responsibilities:

• Supervise daily surveillance & monitoring contractor’s welding activities in accordance with all relevant codes and standards, WPS, project QC plans/ITP’s during const stage for Topside & Jacket Fabrication and HUC.

• Support to PQM regarding quality issues during project execution phase.

• Reporting directly to PQM all inspections conducted on sites for all SMP/Welding and PWHT activities.

• Conduct/Witnessing subcon WQT for ASME sect. IX for HUC project.

• Conduct inspections & quality surveillance activities during contractor's fabrication & offshore installations.

• Witnessing hydrostatic pressure testing.

• Verify welding preparation; pre/heating method and (PWHT) temperature recording system is correct as per WPS.

• Perform fit-up Inspection of Jacket/supports, Hull/Deck, Spud Cans, etc. as requested prior to welding.

• Perform important level of welding inspection of completed welds for Piping system & Steel Structures fabrication.

• Liaise to TPI-NDE rep. for any welds needed for NDE at shop/site & during HUC.

• Report to PQM & coordinate with the const group/Contractor's inspector for any quality related issues.

• Prepare report for any Non-Conformance observed at site.

• Carry-out inspections and approved completed Engineering Work-Packs during HUC activities.

• Ensure all approved inspections documents by QA group are performed & properly documented.

• Support Company’s project schedule and Safety-8 Golden rules of the Co's & all other HSE programs.

• Company: Kellogg Brown and Root (KBR) / JGC JV Sept 2002-June 2004 Designation: QC Lead Inspector

Project: BP/SONATRACH- In Salah gas project

• Essential Duties and Responsibilities:

• Oversee implementation of project QA/QC management system at site. Ensures that all aspects of Quality are maintained in line with the Co’s Quality Policy during Const to Comm. & Start-up.

• Review construction method of statements as per project specs and ITP’s, QA Plan & Procedures, and all related QA/QC documentation prior to start of any fabrication / construction work.

• Coordinate with Client Authorized inspector to ensure project requirement are fully achieved throughout the project.

• Assisted PQM in delivering quality products and services to meet Client’s requirements.

• Supports PQM any quality issues raised by the Client.

• Directly reporting to PQM all day-to-day inspections activities conducted on site.

• Supervise team of Inspectors for the implementation of QA/QC management system at site.

• Plan and organize site inspection activities are conducted as per ITPs'.

• Review & approve WIR, NDE, PWHT and PMI reports, Review Piping Test pack / work packages.

• Supervise & maintain all completed QC inspection reports for handover to TOSTR/Client.

• Conduct Site Inspection to ensure all the procedures are conducted in accord with the Co. specs.

• Witnessing PQR & WQT. Witnessing PT for Pipelines & Process piping system.

• Review RT films in compliance with project codes/standards requirements.

• Ensure all welds are reported, PWHT and NDE are cleared & prepare DWR.

• Ensure & witnessing all eqpt's installations & alignment of major rotating eqpt in accord to project requirements.

• Ensuring all materials & eqpt are properly controlled to prevent degradation of the materials properties.

• Line checking & verification of the punch list prior to approval of TP & release from the client for pressure testing.

• Monitoring PWHT activities is conducted as per approved procedure.

• Coordinate with TPI/vendor, Client's and/or sub-con for any inspections, Doc's approval and/or for any quality problem notice at sites and directly report to PQM.

• Raise QAI/NCR if any non-compliance observes, report and facilitate follow-up of product related to NCR results.

• Review Mechanical & Piping system test/work packs by sub-con for turn-over to clients.

• Responsible in maintaining QC docs/records & reviews of final dossiers to TOSTR for hand-over to client.

• Attending weekly QA/QC meeting. Support Comm during Pre/Comm stage of the plant.

• Partake daily safety toolbox meeting and support project schedule & Co’s (IIF) program & all other HSE policies daily.

• Company: Kellogg Brown and Root (KBR) / Technip May 2001-Apr 2002

• Designation: Senior Mechanical Inspector (Static & Rotating Equipment) - Ethylene area

• Project: Q-CHEM project

• Essential Duties and Responsibilities:

• Ensures that all aspects of Quality are maintained in line with the Co's Quality Policy.

• Supervise team of Inspectors for the implementation of QA/QC management system at site.

• Monitor subcontractors project quality work activities are followed.

• Supports Project QA/QC Manager in delivering quality products and services to meet Client’s requirements.

• Plans and organizes site Inspections teams daily QC activities.

• Conduct inspections for Static and Rotating equipment’s activities as per Company’s PQMS requirements.

• Ensuring all Static & Rotating eqpt's & other ME installations, conforms to vendors and project requirements.

• Conduct welding Inspections for all field fabricated Tanks.

• Ensure all eqpt installations, alignment & elevation levelness are within the limit of acceptance.

• Monitor assemblies & completion of all mechanical eqpt packages (Boiler/Heater) as per the approved drawing.

• Witness pre and final alignment of GT shaft, pumps & motors with client inspector.

• Monitor sub-con piping & eqpt's preservation in accord to Co's requirements.

• Conduct internal inspections for all Static eqpt's prior for final box-ups.

• Support PQM & coordinate with Const/Eng'g group for any Non-conformance observes at site.

• Ensure that all material & all eqpt is properly controlled to prevent degradation of the materials properties.

• Coordinates vendor and/or sub-con for any inspections, Docs. Approval & problems observed at sites.

• Checked/approved final Mechanical inspection docs submitted by the sub-con.

• Carry-out line checking & system punch listing with Comm. & Clients during MC/RFO walk down.

• Carryout field inspection & testing of Rotating eqpt's, skid mounted, machinery & packages.

• Support project schedule and IIF Safety rules of the Co's & all other HSE programs.

• Company: Brown and Root International Oct1997- Mar1999

• Designation: Mechanical Inspector (Static & Rotating Equipment) / Welding Inspector

• Project: TFT Gas Development project

• Essential Duties and Responsibilities:

• Monitor subcontractors' QC activities in accordance with PQMS, Codes/ Standards from construction to Comm. stage.

• Conduct final inspections of completed welds during Fabrication & erection for piping system.

• Ensure welding control during activities as per WPS & welding consumables are correctly stored/maintained.

• Ensure all welds are reported, PWHT completed as required, all NDE cleared & prepare daily welding report.

• Review test package issued by contractor prior to release for testing.

• Ensuring internal cleanliness of Line pipe & spool materials prior to lowering and tie-in.

• Witness all testing activities in accordance as per approved ITP.

• Conduct inspections & ensures installations of all Rotating/Static eqpt in accord to vendor/project requirements.

• Ensure all equipment is installed after site completion as per the approved drawings.

• Witness installations of Static eqpt's, internals trays, packing, trim out, internal cleaning, final closure & box-up.

• Monitor and coordinate all mechanical site installations & during MC activities as per PQM plan.

• Report to PQM & coordinate with the const. group for any quality issues raised at site & initiate NCR.

• Prepare/compile final Mechanical work pack docs for Handover to Client Rep. for approval.

• Conduct line checking/Walk down for every piping system completed during MC.

• Support to commissioning group during Pre-Comm. stage of the plant.

• Support project schedule and Safety rules of the company and all other HSE programs.

• Company: Mohamad Al-Mojil group (MMG) Mar 1996 -Mar1997

• Designation: Piping / Mechanical Inspector (Static & Rotating Equipment)

• Project: Polyester plant project and Yanbu Cement plant Expansion project

• Essential Duties and Responsibilities:

• Perform various inspections on piping fabrications and erections, mechanical equipment installations and Assy, Welding & materials inspections throughout various stages of constructions to completion.

• Ensure & perform on-site tasks related to QA/QC compliance to project specs, ISO 9001, ITP’s, codes & standards.

• Witness inspection assembly & installations of major Static/Rotating equipment’s such as GTG, Boiler, Exchangers, etc.

• Ensure that all weld, welder & welding activities are conducted & performed in accordance with WPS.

• Inspect site assembly and installations of heavy steel structures.

• Coordinate with vendor/client’s site rep. during assembly & inspections of all major mechanical equipment’s and for any Docs requiring vendor’s approval and for any problem observe at sites.

• Report to QC Supervisor & liaise to Engineering/Construction group for any QC related issues being raised at site.

• Interface with NDE-TPI and client inspectors for any site inspection activities and for any problem observe at sites.

• Perform system punch listing with construction group & clients during MC walk down.

• Ensure all welds are reported and NDE is cleared and prepare DWR and Witness field Pressure testing.

• Prepare final Work pack documents of inspections activities & QC records for handover to client.

• Assigned by the company to inspect blasting/painting of steel structures.

• Support Safety Rules of the company & all other HSE.

• Company: Atlantic Gulf and pacific Co. Ltd Sept 1991-Mar1996

• Designation: QC Inspector and Maintenance Engineer

• Projects: 570m3/hr. Desalination plant, 7.5MW NPC Power Barge, Cooling Pipe water intake system, Heavy Steel Structure & Piping fabrications, 7units ONGC Gas Compression Modules (Modular Platforms), eight (8) units Asahi settler Water Treatment Facilities

• Duties and Responsibilities:

• As QC Inspector

• Perform daily on-site tasks related to QC requirements in accordance with QC guidelines, ITPs, & Specs.

• Verified welding preparation & dimensional (fit-up) checking prior to welding.

• Surveillance checked for welders’ performance at Shops and sites.

• Visual inspections of welds for shop fabricated & field erected pipe-spools & steel structures.

• Ensure all welds are reported and NDE is cleared. Prepare daily welding report.

• Assist in Inspecting blasting/painting of piping spools & steel structures.

• Initiate NCR for any noncompliance at site and report to PQM.

• Report to QC Eng, liaise to Clients & const group for any QLTY related issues being raised at site.

• Prepared final QC inspection docs & QC records for approval of the clients prior to hand over.

• Support in Safety Rules of the Co & all other HSE policies & programs.

• As Maintenance Engineer

• Ensures that all equipment is working properly. Worked on a wide variety of machines, like cranes, compressors, generators, motors, etc. assigned in all on-going projects.

• Perform routine maintenance, troubleshoot problems & make repairs as needed.

• Removed old Mechanical equipment’s & installing new machines as approved by the Manager.

• Responsible for scheduling for maintenance of all Mechanical Equipment assigned in all projects.

• EDUCATION and QUALIFICATION

• Bachelor of Science in Mechanical Engineering, Technological Institute of the Philippines, Jun1986- April1991

• Certified CSWIP Welding

Contact this candidate