Facilities Mechanic Preventative Maintenance

VIENGSAVANH (VINNIE) THAVONG

***** ********* *** *** ***** Ca, 92126

Tel: 858-***-**** E-Mail: ************@*****.***

Objective: Facilities Mechanic Technician

A hard working highly motivated Facilities Mechanic with experience Team player and highly skilled at performing in fast paced environment. experience in the biotech industries responsible for trouble shooting, inspection, following engineering instructions, read blue prints and established company rules, regulations and safety precautions, and maintains quality standards. Understands the full cycle assembly process and knowledge of personal protective equipment (PPE). Working in an Aseptic Techniques and work in clean room . Strengths include communication, setting priorities, helping other, listening and training. Knowledge of OSHA safety requirements and training. ISO 9000, 9001, 14000 also Clean room Class 100

EDUCATION

Certificate, Electronic Technician, VCR, TV repaired, City College, Mesa College

PROFESSIONAL EXPERIENCE

Bioserve Corporation Aug 2021- Sep 2023

Facilities Maintenance Technician

. The operations support by maintaining building infrastructure and assisting with emergency,

corrective, and preventative maintenance for building utilities, Daidly check sheets cGMP

manufacturing. independently performs a variety of skilled preventive general maintenance

activities, repairs, construction, and renovation work on facilities. maintain all building

systems and equipment to include but not limited to, HVAC PM, vacuum, RO/DI, chilled water,

autoclaves, boilers, systems and equipment to include but not limited to, electrical equipment,

Nitrogen Liquid and Carbon Dioxide, frighter exinspections of fire extinguishers check,maintaining

maintaining cleanliness of the plant and equipment,Taking care of office lighting, performing

preventative maintenance (PM) PLC Program.

. Perform electrical, mechanical, and pneumatic troubleshooting on automated manufacturing

equipment resulting

in effective and high quality, preventative maintenance on various equipment including complex

custom assembly automation systems additional duties as assigned. Maintenance sterilization

and decontamination of the work area daily.

. Report and improve maintenance procedures and training May prepare reports and maintain the

database and metrics on preventive maintenance and machine breakdowns of all responsible

equipment.supplies Manages the incoming/outgoing supplies and the transport of parts and

equipment.

. Ensure required manufacturing and laboratory equipment up time through scheduled equipment

maintenance & repair. when required, for the operations, maintenance, and repair of facility

support systems in a safe and expeditious manner. Facility utilities are 100% operational and

maintained to support clean rooms, laboratories, special purpose areas, and critical equipment

needs. Monitor and process waste materials

. Implement and manage plan execution for calibration and maintenance, laboratory equipment,

Building Management System, utilities, including compressed gases, liquid nitrogen,

temperature controls.

. Provide support and assistance to manage external supplier relationships for utilities

maintenance partners and site support services including landlord tenant issues.

. Ability to troubleshoot basic electrical, mechanical, and plumbing systems. Ability to articulate

information to coworkers and vendors Able and willing to follow all legal and company safety

regulations Able to work independently or Team player.

. completeness of maintenance information entered in the Excel, Microsoft maintenance minor

in shop repairs of in shop repairs of tooling, cell equipment, and components-develop and

maintain the 5S of the maintenance areas-travel between various Cue facilities for clerical

duties may dispatch.

. Have reliable vehicle and valid driver’s license to support multiple facilities, Able to work

weekends or other shifts on physical occasions.. standing or sitting for prolonged period of time

Adjusting, moving or lifting objects up to 50 pounds Repeating motions that may include the

wrists, hands and/or fingers Operating machinery always use power tools.

General Atomics Feb 2020- Aug 2021

Cirris Test / Cable Assembler

. Sets up and conducts semi-routine electronic testing (bench, environmental, and electron

mechanical testing) records, interprets and summarizes data and provides reports to

Supervisor or Manager.

. Tests troubleshooting techniques following established quality processes, standards, and

safety regulations. be able to troubleshoot and find root case of the failure in order to process

and correct the failure. Good time management skills with the ability to work independently as

well as a team contributor.

. When building cable harness assemblies you will need to perform a variety of tasks that include

component verification, wire stripping, crimping, containerization per wiring diagrams, harness

layout/lacing, shield termination, heat shrink, and label application. Additional operations you

need to complete are soldering, splicing, breakouts, wiring, and monitor quality in accordance

with control procedures. building complex cable harness assemblies that will require you to

following drawing specifications, elaborate written work instructions, harness assemblies that

will require you to following drawing specifications, elaborate written work instructions, and

B.O.Ms to label and build assemblies.

Solar Turbines

Electrical Mechanical Assembler 2 Jul 2019- Feb 2020

. Layout, fabricate parts, and build electrical / electronic wiring components. Perform complete

operations to fabricate, assemble and install production and / or first article units, such as

control junction consolidates, instrument panels, relay panels and battery racks in a manner

that aligns with standards for safety, quality, velocity, and cost. Performs inspection of materials

parts, assemblies and process inspection when required.

. May perform work operations under direct guidance where adequate information has not yet been

determined and furnished. Select, brand, cut, route, fasten, sleeve, tie and lug wires; assemble

and install wiring harnesses; locate, drill, mount, and fasten components, install in proper

sequence in control consoles, junction boxes, instrument/relay panels, resistors, capacitors,

filters, diodes, circuit boards, heat and speed sensors, transformers, meters, malfunction status

indicators, circuit breakers, and fuses. Perform rework of the nature and level of difficulty

described herein. initiative and be self-motivated to learn new software, processes and skills

with positive energy within a small, always team player.

Northrop Grumman

Mechanical Assembler 2 / Pear Inspection 2018 – 2019

. Perform mechanical and Electrical assembly such as cables, harnesses, chassis, and printed

circuits boards. performs inspections of materials, parts assemblies and processes inspection

when required.

. Set up conducts testing cable and established quality processes standards and safety

regulation.

. Perform sub-assemblies such as modules, boards, panels, drawers, frames, cables, and point

to point wiring.

. Disassemble, modify, rework, reassemble assemblies and sub-assemblies according to

specifications and drawings.

and drawings.

. Determine and follow methods sequences of operation in performing assembly such as wiring,

component installation, hand soldering and cable harnessing on assembly units.

Meggitt Aircraft Systems

Manufacturing Technician Aug 2018 – Dec 2018

. Performs a range of complex routine mechanical and electronic mechanical assembly of small

parts and/or accordance in accordance with company processes and procedures. Use hand

small power tools, and various measuring and testing devices in performing job duties.

. Conducts inspections of own or other associates work to ensure accuracy in accordance with

company and/or customer drawing Adjusts and calibrates systems as needed.

. Uses shop traveler, Excel and SAP Program route card, or uncomplicated schematic drawings to confirm correct sequence of operation. Set up conduct testing product and multi-meter established quality processes standards.

. Applies process specifications governing production of product within an assigned cell

. Maintains work area under company guidelines and participates in company events and/or

projects as required, Performs electronic work order movement in ERP system Records

production time and quantity data at the cell Other responsibilities as assigned.

Diversified Nano Solutions Corporation Manufacturing Technician / Lab Technician 2017-2018

. Work closely with R&D Manager and Scientist in order to provide technical support for new and

products. Follow standard protocols for manufacturing and characterizing ink products. Use of

technical equipment for mechanical mixing, materiel property evaluation (Viscometer, Tension

meter, PH meter, etc.) and bottling (filling machines) of ink products, If need adjustment have

PH meter, etc.) and bottling (filling machines) of ink products, If need adjustment have to perform

adjustment.

. Responsible for filling orders with high level quality assurance, Assemble and document testing

and issues with existing and new products. Follow production procedures, record process

issues with existing and new products. Follow production procedures, record process

operations and data record process operations and data entries on batch records, carefully

review all documentation, and check all calculations (e.g. batch records, labels, equipment

readings) submitted all daily logs and reports.

Pacira Pharmaceuticals Inc, Manufacturing Technician II 2012-2016

. Responsible for following SOPs, performing daily tasks in a clean room/cGMP environment per

current QSRs. May also be responsible for troubleshooting manufacturing product challenges.

Aseptic technique, clean room gowning and extensive knowledge of Good Manufacturing

Practices (GMPs), with emphasis on Biologic. Follows established company rules, regulations

and safety precautions, and maintains quality standards

. Perform Pres-Cip, Cip1, Cip2, Sip and verify commercial Bulk operations in a cGMP regulated

environment to produce Exparel. Prepare reagents following standard operating procedures

(SOPs) in accordance with current good manufacturing practices (cGMPs)

. Operate HMI to manually fill and drain production vessels to perform rinse water sampling. Used

HMI to safety vent and depressurize vessels used in manufacturing. Conduct pressure hold test

of skid prior to Bulk and depressurized vessels used in manufacturing. Conduct pressure hold

to Bulk manufacturing and at the conclusion of Bulk activities. Also, perform integrity test of cross

flow. Filtration System before commencing Bulk activities and laboratory protocols regulatory

and safety requirements.

. Dispense raw materials including active Pharmaceutical ingredient and recipients used for

production slurry and buffers needed for successful production of the final drug while. Produced

adjustment solution and cleaning agents using basic calculations and formulas.

. Perform other related duties as assigned, collaborate in team meeting and activities, including

set team support as appropriate, and perform other related duties as assigned, Understands

quality specific. Always performs inspect and double check work is done or if need somebody

specific. Always performs inspect and double check work is done or if need somebody

to verify Review manufacturing documentation real time to ensure compliance. Ability to be

flexible in adapting work plans to current corporate goals.

Contact this candidate