Quality Control Qc Inspector
Resume:
Matthew C. Hallam
Spring Texas 77373
********@*****.***
Previous Employment
Randstad/ TMEIC Corporation /Temp
***** **** **, ****, ** 77493
QC Inspector
I meticulously inspected the production stage during the installation and assembly of UPS units. I ensured electrical and electronic materials were installed correctly using detailed engineering drawings and intricate wiring diagrams. I vigilantly checked for deviations, defects, or substandard workmanship, paying close attention to every minute detail. My role also involved compiling comprehensive reports on critical failures and supervising the production crew on the manufacturing floor.
Randstad/All Current Electrical Sales, Inc.
12550 N. Houston Rosslyn RD, Houston, TX 77086
June 2024 – August 2024
Quality Control/Inspector/Temp
I conducted thorough final assembly quality control inspections on electrical panel boxes, MCC buckets, and various electrical control units. My responsibilities included performing power-up routines and mechanical inspections, using multimeters to verify electrical continuity, and ensuring proper phase achievement. I examined the ground and neutral configurations of each build, confirming that every component adhered to the detailed layout plans and blueprints and met the manufacturer’s and the company’s rigorous quality standards. While I assisted with powering up significant components and complex assemblies, I played a supportive role rather than leading the entire process.
TEX-TUBE
1503 N. Post Oak Blvd, Houston, TX 77055
January 2023 –June 2024
Quality Control Inspector/Checker: In this role, I use various advanced inspection tools, including OD meters, calibers, and IP tape, to evaluate whether each product meets stringent quality control standards. My work involves a thorough physical analysis and visual and tactile inspections of pipe products to identify defects, noncompliance, or nonconforming aspects.
Comal Services for MS Directional /Temp
3335 Pollok Dr., Conroe, TX
November 2022 – December 2022
Quality Inspector: I carefully inspected downhole drill motor components to determine their suitability for reuse and refurbishing. My process involved using various hand tools, power tools, precise inspection instruments such as calibers and OD meters, and visual and physical evaluation methods. Components that met the required standards were meticulously cleaned and prepped for reuse, while those that did not pass inspection were promptly scrapped. Additionally, I operated forklifts and cranes for material handling and used computers and office copiers to complete detailed inspection reports.
Smurfit Kappa
8770 West RD, Houston, TX 77064
June 7, 2022 – October 13, 2022
Machine Operator Helper: I assisted in the high-speed machinery's paper feeding and loading process and helped set up the equipment. I became proficient in operating an S&S Flexo 50” multi-color printing machine, which included integrated die-cut, fold, and glue functionalities, to ensure the production process ran smoothly.
Enerstaff/VAM USA/Temp
19210 E Hardy Rd, Houston, TX 77073
January 2022 – March 2022
Batch Operator – Phosphate Coating Operator / Quality Wall (inspector)
I managed the phosphate coating process for couplings, utilizing a precise chemical procedure. My responsibilities included performing quality control checks on finished products before they were shipped. I ensured that every item adhered to strict specifications, using various calibration tools such as calibers to maintain the highest standards.
Randstad/Alcon /Temp
9965 Buffalo Speedway, Houston, TX 77054
June 2021 – September 2021
Warehouse and Assembly Production
I began my tenure in production by assembling specialized kits tailored for eye surgeons. I carefully hand-packed various pieces of equipment into complete single-use packages designed to meet the precise demands of surgical procedures. This role required exceptional critical thinking skills and meticulous attention to detail. Additionally, I worked in the warehouse using handheld RFD scanners to fulfill pick orders, handling up to one hundred separate orders per shift quickly and accurately.
BARONHR/Dr. Pepper /Temp
2400 Holly Hall, Houston, TX
Batching Operator (August 2020 – January 2021)
I orchestrated the staging and mixing of ingredients for various flavored products. Following detailed ingredient sheets and recipes, I used industrial mixers and computers to craft syrup, taking precise samples for quality assurance. I operated the control panel to deliver syrup to the production line and performed water purity tests as part of the QA process. Additionally, I operated a forklift and other industrial equipment while consistently maintaining a clean and organized work environment.
CSAT Solutions
9707 Northcourt, Houston, TX
Computer Tester/Computer Repair Technician
June 2019 – August 2020
In this dual-role position, I tested and repaired a wide range of computers, desktops, laptops, and tablets to ensure full functionality and adherence to quality control standards. I successfully installed operating systems and critical updates when required. As a computer repair technician, I diagnosed and repaired hardware components, followed by rigorous quality control testing to ensure each service was completed to the highest standard.
Southern Tire Mart
Kingwood, TX 77339
August 2018 – November 2018
Parts Manager
I ordered components, tracked credits and returns, and handled invoicing while ensuring precise inventory control and stocking. My responsibilities also included managing monthly expenditures exceeding $100K, demonstrating acute financial oversight and logistical precision.
Ripley’s Quick Lube, Spring, TX
April 2016 – July 2018
Lube Technician
I performed essential oil changes and preventive maintenance on a variety of automobiles. In addition to my technical responsibilities, I engaged customers in sales conversations, thoughtfully prioritizing the upselling of additional services offered by the company. My duties also required the proficient use of various hand and power tools.
Bayou City Truss, Houston, TX
October 2015 – April 2016
Maintenance Helper
I was actively involved in performing preventive maintenance on equipment and facilities and repairing equipment during breakdowns. This role demanded proficiency with various hand tools, power tools, and welding apparatus—coupled with forklift operation and carpentry skills—to maintain the building and its surrounding grounds effectively.
Jiffy Lube/Allied Lube Inc., The Woodlands, TX
March 2013 – October 2015
Lube Technician, Customer Service Assistant, Assistant Manager
In this multifaceted role, I opened and closed the store, managed daily bank deposits, and set schedules for the team. I supervised the crew while handling inside sales of services and products. My cashier duties required adept problem-solving and efficient customer complaint resolution. Additionally, I utilized a variety of hand and power tools to meet all operational requirements.
Department of Homeland Security (TSA), Houston, TX
September 2002 – April 2012
Transportation Security Officer (Series 1802, E-band Federal Officer)
I provided vigilant airport and air travel security using advanced equipment such as X-ray machines, hand-held metal detectors, and explosive trace detection devices. My duties included physically searching baggage and individuals, standing watch, and performing guard duties at exits and security checkpoints. I also served as an On-the-Job Training (OJT) Monitor, where I trained and evaluated newly hired employees and was an active member of the emergency procedures team.
EDUCATION
San Jacinto College, Pasadena, TX
September 1993 – May 1995
General Studies (Core Curriculum for associate in business)
Credit Hours: 40 / GPA: 2.4
SKILLS
• Extensive forklift experience
• Experience as a welder's helper and working with grinders
• Proven general labor and preventive maintenance capabilities
• Proficiency with a wide array of power tools and hand tools
• General office and computer proficiency, including office suite software
• Strong inside sales skills
SOFTWARE EXPERIENCE
• Windows (versions 11.0 and lower)
• Proficient with Office Suite applications including Word, Excel, PowerPoint, Access, as well as Corel Word Perfect 11 and Photoshop
• Familiarity with automotive light repair software and tools
Contact this candidate