Soldering, Repair, cable Technician and manufacturer in Electronics
Resume:
Haitham Hindi
***** ****** ** ** *****, CA *****
Cell phone: 619-***-****
******@*****.***
Summary of Qualifications:
•Computer knowledge of Microsoft Office: Power Point, Excel, Word; Internet; and E-mail.
•Strong cable build and cable assembly experience.
•Strong SMT soldering and rework skills.
•Highly skilled and knowledgeable of SMT components (ICs, resistors, capacitors).
•Excellent written and verbal communication skills, reliable, team player, personable and customer-service oriented.
•Proficient in reading/interpreting engineering drawings, assembly drawings, schematics, prints.
Work experience:
Sound Imaging 1/2025 – Current
Electronics Technician - Bench Repair (MRI) San Diego, CA
•Responsible review of analog and digital circuit card schematic functionalities prior to layout for Magnetic Resonance Imaging (MRI) equipment’s.
•Test MRI components at different levels, as well as total system performance.
•Test prototype circuits to enable features required by the customers (i.e., hospitals, MRI centers, etc.) in the integration of display technologies to their own system.
•Prepare and review technical drawings and specification of electrical systems to ensure that MRI equipment's operations standards are met.
•Diagnose failure/malfunction of all equipments (RF Amplifier, Power supply, Driver module, etc.).
•Knowledge of radio-electronic components.
•High level in soldering with all kinds of SMT and PCB boards.
•Use high skills in working with measuring devices (digital multi-meter, oscilloscope and spectrum analyzer).
•Working with projects based on Arduino.
•Working on RF equipment’s and EMF noise reduction.
• Use hand tools, cutters, wire strippers, various hand crimpers, scissors, soldering iron, heat gun, torque wrench, tape measure, caliper and mixes glues (epoxies).
Fuse Integration 7/2022 – 1/2025
Manufacturing Technician III San Diego, CA
Responsible for: Electrical circuitry, Electrical components and assembly, Soldering complex electrical systems and subsystems, Subsystem assembly, Parts kitting, Wire harnessing, Cabling (all kinds of cables), multi-meter and electrical test equipment and Manufacturing.
•Build a complex data cable in critical attributes with high attention to detail and Patience.
• Work with very small parts, sometimes requiring tweezers and Microscope.
•Ability to uphold high quality standards set by the defense and aerospace industry.
•Familiarity of analog communication interconnects such as Serial Communication, RS232, RS422, RS485, USB (universal serial bus), Ethernet and GPIO (general purpose input and output).
•Familiarity of analog communication interconnects such as Coaxial Cable, SMA, TNC, BNC, CT and PT.
•Familiarity IPC J-STD-001 as well as IPC- 610
•Assembly / disassembly machines call (Core) and test it using both traditional and non- traditional tooling and test all the electronics boards with rework if need it before assembly.
•Build equipment used for military, aerospace, and commercial products.
•Build various cables CAT5, CAT6 and data cable that meet requirements.
•Follow methods and sequences of operations in performing assembly tasks such as wiring, component installation, hand soldering, and cable harnessing on assembly units.
•Crimp terminals/contacts onto wires using manual and automated tooling.
•Label assemblies in accordance with drawing specifications.
•High experience with soldering, primarily dealing with splicing wires and connections.
•Performs complex but repetitive tasks in preparation for electronic and/or mechanical assembly.
•Use hand tools, cutters, wire strippers, various hand crimpers, scissors, soldering iron, heat gun, digital multi-meter and mixes glues (epoxies).
•Observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
•Expected to work in a safe manner in accordance with established operating procedures and practices.
Rain Bird 9/2021-7/2022 Electronic Lab Technician San Diego, CA
•Built prototype circuit boards.
•Testing and the evaluation of components.
•Perform engineering tests and validate prototypes.
•Investigate/troubleshoot problems on site and as well as customer sites
•Create and build engineering test fixtures, wire harnesses, etc.
•Create purchase order requests (POR) for components, lab supplies, etc.
•Create new test procedures for validating new products.
•Keep the lab in clean, organized condition and well stocked.
•Assist engineers in creating ECOs and component drawings.
•Coordinate equipment calibration with outside test houses.
•New product development, including technical support experience with embedded microprocessors, analog/digital circuits, LCD displays, power supplies, etc.
•Read schematics, recognize components, interpret and understand the function of analog and digital circuits.
•Assembly/disassembly testing electronics, especially dealing with SMT.
•Excellent troubleshooting skills with diagnosing and repairing failures of electronic assemblies.
•Experience in use of advanced development tools: LabVIEW, oscilloscopes, DMM, logic analyzers, data loggers, environmental chambers, etc.
•Experience in lighting/surge testing, ESD testing and power fluctuation testing.
•Experience with PCB CAD layout tools (Altium).
Sound Imaging 4/2020 – 9/2021
Electronics Technician - Bench Repair (MRI) San Diego, CA
•Responsible review of analog and digital circuit card schematic functionalities prior to layout for Magnetic Resonance Imaging (MRI) equipment’s.
•Test MRI components at different levels, as well as total system performance.
•Test prototype circuits to enable features required by the customers (i.e., hospitals, MRI centers, etc.) in the integration of display technologies to their own system.
•Prepare and review technical drawings and specification of electrical systems to ensure that MRI equipment's operations standards are met.
•Diagnose failure/malfunction of all equipments (RF Amplifier, Power supply, Driver module, etc.).
•Knowledge of radio-electronic components.
•High level in soldering with all kinds of SMT and PCB boards.
•Use high skills in working with measuring devices (digital multi-meter, oscilloscope and spectrum analyzer).
•Working with projects based on Arduino.
•Working on RF equipment’s and EMF noise reduction.
• Use hand tools, cutters, wire strippers, various hand crimpers, scissors, soldering iron, heat gun, torque wrench, tape measure, caliper and mixes glues (epoxies).
Fuse Integration 9/2019 – 4/2020
Complex Cable and Electronic Technician San Diego, CA
•Build a complex data cable in critical attributes with high attention to detail and Patience.
•Work with very small parts, sometimes requiring tweezers and Microscope.
•Ability to uphold high quality standards set by the defense and aerospace industry.
•Familiarity of analog communication interconnects such as Serial Communication, RS232, RS422, RS485, USB (universal serial bus), Ethernet and GPIO (general purpose input and output).
•Familiarity of analog communication interconnects such as Coaxial Cable, SMA, TNC, BNC, CT and PT.
•Familiarity IPC J-STD-001 as well as IPC- 610
•Assembly / disassembly machines call (Core) and test it using both traditional and non- traditional tooling and test all the electronics boards with rework if need it before assembly.
•Build equipment used for military, aerospace, and commercial products.
•Build various cables CAT5, CAT6 and data cable that meet requirements.
•Follow methods and sequences of operations in performing assembly tasks such as wiring, component installation, hand soldering, and cable harnessing on assembly units.
•Crimp terminals/contacts onto wires using manual and automated tooling.
•Label assemblies in accordance with drawing specifications.
•High experience with soldering, primarily dealing with splicing wires and connections.
•Performs complex but repetitive tasks in preparation for electronic and/or mechanical assembly.
•Use hand tools, cutters, wire strippers, various hand crimpers, scissors, soldering iron, heat gun, digital multi-meter and mixes glues (epoxies).
•Observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
•Expected to work in a safe manner in accordance with established operating procedures and practices.
WIS International 11/2016 – 9/2019
Electronic Repair Technician (Repair Depot) San Diego, CA
•Perform diagnostics, repairs and preventative maintenance upon various generations of inventory counting terminals, scanners, scales, PC's, laptops and related peripheral equipment. Operating and performing set-up of automated production equipment and machines.
•Maintain software by installing, configuring and troubleshooting various applications.
•Protect company equipment by utilizing proper testing and repair procedures.
•Coordinate repair projects and equipment upgrades by testing new hardware and software as well as by tracking progress on assignments.
•Manipulate/operate hand tools, soldering equipment, reflow station and electronic test equipment, and read data and information visually from electronic test equipment, and to recognize indications of computer or peripheral equipment mechanical failure/malfunction.
•Perform visually distinguish small electronic components and effect repairs, as well as
read and follow color codes and schematic drawings.
•Keep Director of IT and Repair Depot Lead informed by communicating any significant repair trends.
•Use various electronics tools and equipment with soldering machines to treating Surface Mount Technology (SMT).
•Use electronic test equipment such as oscilloscopes, signal generators and power supply to diagnose failure/malfunction of the terminals.
•Reads Electronic Schematics diagrams and follows written instructions regarding duties to be performed.
•Effect repairs to assigned equipment by following established Electrostatic Discharge (ESD) and safety standards and procedures.
Kyocera America 8/2016 – 1/2017
Process Technician San Diego, CA
•Test and inspection procedures to ensure that production schedules and quality standards are met.
•Operating and performing set-up of automated production equipment and machines.
•Work with computer equipment, machinery, or electrical tools.
•Perform maintenance and repairs on machinery.
•Working under a microscope daily with manual dexterity to inspection and fix the electronic small parts.
•Use Automated Test Equipment, handheld tools, soldering iron, assembly drawings, bills of materials, schematics, written instructions, and other applicable documents.
•Checks work for accuracy, quality, and conformance to specifications.
•Use appropriate software and PCs to setup the automated machines such as Fuji, Laser, RTC Heller and marking Jet.
•Use solders past to print the microelectronic circuits and printed circuits boards.
• Using isopropyl alcohol to clean microelectronic circuits, printed circuits boards and the work places to quality standards are met.
•Follow the safety procedures and wear clean room garments.
Education:
Certified IPC/WHMA-A-620 A620S24020216377 Dec 2023-Dec2025
Certified IPC J-STD-001 J001S23112130472 Oct 2023-Oct2025
• Grossmont College Aug 2010-June2014
Medical Lab Technician El Cajon, CA
• Grossmont Health Occupations Center Aug2011-Nov 2011
Health Essentials Course Santee, CA
•Institute of Technology Aug 1986
Associates Degree in Technical and Electronics Science Baghdad, Iraq
•Algmhourea Secondary School July 1984
High School Diploma
Contact this candidate