Hazardous Materials Safety Data

Location:

Orlando, FL

Posted:

February 09, 2025

Contact this candidate

Resume:

Instructions

WorkBright ****

OSHA - Hazardous Materials -

Your Right to Know

Jump to Form Download PDF

OSHA - HAZARDOUS MATERIALS – YOUR RIGHT TO KNOW

The Occupational Safety and Health Administration (OSHA) has issued a rule – the Hazard Communication Standard – that will help your employer keep you safe and healthy. It says you have a “RIGHT TO KNOW” what hazards you face on the job and how to protect yourself against them. This nationwide hazardous material information system was designed to give employers and workers information about hazardous materials used in the workplace. It provides information through:

1) Warning labels on the containers of hazardous materials; 2) Safety data sheets (SDS) to supplement the label with detailed hazards and precautionary information; and

3) Worker training programs on how to use the information. PURPOSE OF OSHA RIGHT TO KNOW

OSHA has designed this program to give all employees with consistent quantity and quality of information about hazardous materials used in the workplace. Basically, the three goals of OSHA and Hazardous Materials are:

• To provide information about hazardous materials.

• To help identify hazards in the workplace.

• To ensure the consistency of information about hazardous materials in all workplaces.

OSHA is able to meet these three goals without compromising conﬁdential business information or trade secrets.

The ﬂow of information about hazardous materials under OSHA goes from producers, suppliers and importers to employers and from employers to employees who use those materials in the workplace. The information is contained on Labels and Safety Data Sheets. INFORMATION DELIVERY

The parts of the OSHA Right to Know program include a written communication program which must:

1. Tell employees about the Hazard Communication Standard 2. Explain how it is being put into effect in their workplace 3. Provide information and training on hazardous chemicals in their workplace which includes how to:

• Recognize, understand and use labels and SDS (Safety Data Sheet) and

• Use safe procedures when working with hazardous substances. 4. Employees have responsibility in protecting themselves by reading labels, SDS’s and following these instructions and warnings. Labels, as deﬁned in the HCS, are an appropriate group of written, printed or graphic informational elements concerning a hazardous chemical that are afﬁxed to, printed on, or attached to the immediate container of a hazardous chemical, or to the outside packaging. The two types of labels are:

1. Supplier labels – these arrive from manufacturer, importers, and distributors 2. Workplace labels – containers used by the employees to perform duties that contain chemicals from a supplier and require labeling. Always Read the Label First!

Labels for a hazardous chemical must contain:

• Name, Address and Telephone Number

• Product Identiﬁer

• Signal Word (i.e. Danger or Warning)

• Hazard Statement(s)

• Precautionary Statement(s)

• Pictogram(s)

SAFETY DATA SHEET (SDS)

The Safety Data Sheet (SDS) is often called the key to hazard communication. This is the one place where all the important information on the chemical can be found. Labels, as described above, contain a great deal of information; however, due to their small size the labels do not provide all of the needed safety information. Before 2012, these forms were called MSDS, they contained much of the same information but they were not in a structured format. With the SDS they must all follow the same format; Then the SDS are divided into sixteen sections:

1) Identiﬁcation – This section identiﬁes the chemical on the SDS as well as the recommended uses. It also provides the essential contact information of the supplier. 2) Hazard(s) Identiﬁcation – This section identiﬁes the hazards of the chemical presented on the SDS and the appropriate warning information associated with those hazards. 3) Composition/Information on Ingredients–

LABEL INFORMATION

1 of 6

Please read and review the document and

ﬁll out the information below:

* 1. True or False?

The Hazard Communication Standard (HCS) gives you

the right to know what hazards you face on the job and how to protect yourself against them.

* 2. True or False?

Labels, as deﬁned in the HCS, are an appropriate

group of wri!en, printed, or graphic informational elements concerning a hazardous chemical that are

a"ixed to, printed on, or a!ached to the immediate container of a hazardous chemical, or to the outside packaging.

* 3. SDS stands for:

* 4. The SDS informs you of:

* 5 (A). Name one of the 6 elements that must be on the label of a hazardous chemical:

* 5 (B). Name another of the 6 elements that must

be on the label of a hazardous chemical:

* 5 (C). Name another of the 6 elements that must

be on the label of a hazardous chemical:

* 5 (D). Name another of the 6 elements that must

be on the label of a hazardous chemical:

* 5 (E). Name another of the 6 elements that must

be on the label of a hazardous chemical:

* 5 (F). Name another of the 6 elements that must

be on the label of a hazardous chemical:

* 6. As of 2012, MSDS forms were updated to SDS

forms, and now have how many consistent and

uniform sections?

* 7A. Match the Symbol to the Name:

Refer to the PDF above or the left of this question. On the ﬁnal page, refer to the symbol marked "A" and