Quality Assurance Control

Mohamed Hassan *** Shoaf St. Lexington NC, ZP -***92, USA

E-mail: ***.***************@*****.***

Cell: +1-336-***-****

Summary

Quality Control, Quality Assurance Engineer and Welding Inspector in QC, QA and Inspection of all types of welding in different types of equipment (such as: Tanks, Boilers, Pipe-lines, Turbine, Compressor, Pumps, Steel Structure, etc..). Worked as a material engineer along with getting certified with C.SWIP 3.1 Certificate in addition to getting certified from ASNT “American Society for Non-Destructive Test” in (Ultra-Sonic Test), (Radiographic Test), (Magnetic Test), (Liquid Penetrant Test).

Objective

Seeking for a suitable position related to QA & QC where I can utilize my technical and leadership experience as above mentioned achieving the organization targets and meeting its goals, along with maximizing my personal potential for more responsibilities and developing my career pass.

Personal Information

Full Name Mohamed Saleh Khamis Hassan

Date of Birth 16- 08- 1982

Marital Status Married

Military Status Exempted finally after Postponing

Place of Birth Alexandria, Egypt

Professional Training and Certificates

Course with the Certificate

Issuing Date

C.SWIP 3.1 (CSWIP-WI-6-92, 8th Edition January-2014)

2nd October 2014

Magnetic Particle Testing "Level 1&2"

29th May 2008

Liquid Penetrant Testing

15th June 2008

Ultrasonic Testing "Level 1&2"

10th August 2008

Radio Graphic Testing

17th August 2008

Welding Technology course

Education

B.Sc. of Mechanical Engineering 2005.

University: Faculty of Engineering - Alexandria University.

General Grade: Good.

Graduation Project Grade: Excellent.

Experience

2018 Till Now (Gas Town Services) NC, USA -

Working as : Inventory Auditor with following responsibilities:

Count inventory items with proper, frequent and up to date data-entry into inventory system.

Checking expiration dates on merchandise and inspect inventory for other issues that may affect quality or salability.

Reporting inventory issues such as shortages, overages, mis-shelved products, and damaged items along with rotating inventory items keeping the older stock in the front.

Write daily inventory reports and submit them electronically to the General Manager every day.

Paying high attentions to the details to notice damaged products and other inventory problems that may ultimately affect sales.

Working with general manager on continuous development of inventory stock.

2016 to 2018 (®PICO Energy Group) Egypt -

Petroleum Services & Investment

Fabrication of Oil Platform Project :

Project: Engineering, Construction for New AMAL C Platform and Related Offshore works

Location: Egypt, Petrojet Maadia yard (Mediterranean Sea) / Petrojet Zait Bay yard (Red Sea)

Position: Sr. QA/QC engineer.

Responsibilities:

Receiving materials Inspection with MRR.

Reviewing all quality procedures.

Welding inspection (before, during, and after welding) onshore and offshore.

Evaluation of NDT results of material and Welding in according Codes, Standards and Specification (interpretation of RT films, UT, PT, MT& PMI evaluation).

Coating inspection.

Making fabrication daily report, NCR, Near miss and NDT progress report.

Making final review of Manufacture Record Book for all the project documentation.

2010 – 2015 (INTERTEK GLOBAL SERVICES) - UAE

Being supplied to (ADCO Company for ONSHORE OIL OPERATIONS) and working through following sites:

ADCO –ASAB Site

Represent the Client (ADCO) at all running works:

MOL LINE (the main oil line)

All flair lines (Erection and welding)

Material certificates reviewing.

Witness for all hydrostatic tests running there.

All welding inspector duties.

NORTH EAST BAB Site

Working as a senior Welding Inspection and responsible for QC team as following:

Checking all materials to comply with its certificates.

Checking all drawings to confirm it’s certified and approved.

Calibrating and checking all used equipment on regular basis to make sure they are always in good and proper conditions.

Responsible for all process in the main work-shop.

Supervise all welder qualification tests.

Monitoring all welding processes in the site.

Implementing all required tests (NDT & HEAT TREATMENT).

Inspection of all static equipment’s.

Prepare all documentations for all processes & tests.

SAHIL-SHAH Site

Represent the Client (ADCO) at all running works:

MOL LINE (the main oil line)

All flair lines (Erection and welding)

Material certificates reviewing.

Witness for all hydrostatic tests running there.

All welding inspector duties.

2010 – 2010 PETROMAINT (Alexandria Petroleum Maintenance) - Egypt

Working as: QC / QA Engineer through:

Checking Material

Making WPS, WPQ

Testing the Welders

Welding Inspection

NDE Operation (VT, RT, PT, MT, Thickness Measurement)

Dimensional Survey

Preparing QC Files

Participating in following Projects:

South Dabaa:

oConstruction of pipelines, manifolds, tanks, steel structures.

oFabrication of Fire Water System.

AGIBA:

oZarif Tanks Piping Network.

oFabrication of 20 Tanks 1000BBL.

PETROBEL:

oMaintenance and Inspection on Temsah Glycol Regeneration Units (GR2).

oLiquid Penetrant Test on 2nd stage Bucket of Frame 5 Gas Turbine GE Oil&Gas (Nouvo Pignone).

G.U.P.C.O

oFabrication of Two Manifolds for RZK Fields.

oFabrication of Well 38&42 Pipeline.

TEMSAH Shipbuilding Co.

oConstruction of pipelines, manifolds, tanks, steel structures.

oFabrication of Fire Water System.

LIQUIDE Co.

oZarif Tanks Piping Network.

oFabrication of 20 Tanks 1000BBL.

Marine Technical Co.

oMaintenance & Inspection on Temsah Glycol Regeneration Units.

2008 – 2009 INSPECTA Middle East Service Company - Egypt

Working as: QC-QA Engineer for:

MAGNETIC & PENETRANT TEST

Inspection by M.T, P.T for crank shaft reciprocating compressor Nouve Pignone in MIDOR (Middle East Oil Refinery).

Inspection by M.T, P.T for the Rotor of GE Gas Turbine 5002D during Major Inspection in ELNG, IDCO, Egypt.

Inspection by M.T, P.T for crank shaft reciprocating compressor IHI in SEGAS-LNG, Damietta, Egypt.

Inspection by M.T, P.T & visual for steel structure: (Mahmodeya Electricity Station Site).

Magnetic test for crankshaft of ocean beauty ship: (Continental Company for marine services).

Magnetic test for all rings joints of C3 SPLITTER: (UHDE COMPANY) Construction site in Port Said.

Magnetic test for Crain stanchion (Perfect Fabrication Company).

ULTRASONIC TEST

Middle East Oil Refinery (MIDOR) in Alexandria:

oThickness survey of tanks, pipelines different equipment’s.

oUltrasonic test for pipelines welds with different thickness.

(UHDE COMPANY) Construction site in Port Said:

oULTRASONIC Test of all main welds of C3 Splitter (DIM 5 MT).

(ESACO COMANY) Borg El-Arab Industrial Zone:

oUltrasonic test for different welds with different thickness of steel Structure.

oUltrasonic lamination test for different thickness of steel structure.

LIQUID PENETRANT TEST

E-LNG Egyptian LNG, IDCO, Egypt

oLiquid Penetrant Test on 2nd, 3rd stage nozzle of GE Gas Turbine 5002D.

oLiquid Penetrant Test on 3rd stage bucket of GE Gas Turbine 5002D.

oLiquid Penetrant Test on Blades of last 3 stages of GE Compressor.

oLiquid Penetrant Test on the shaft and Impeller of 3 stages Centrifugal Pump GE Oil&Gas.

MIDOR (Middle East Oil Refinery), Alex, Egypt

oLiquid Penetrant Test on the shaft and Impeller of Single stage Centrifugal Pump GE Oil&Gas.

Working as Manpower through (INSPECTA Middle East) for:

EL ATTF POWER STATION (MAHMOUDYA SITE)

Prepare Welding Qualification tests W.Q.T & Conduct the Test.

Prepare W.P.S & P.Q.R for Piping Systems According to Specified Code.

Monitoring of all Welding Operation to assure Compliance with Specified Code (Tanks & Pipe Lines).

Piping Erection Inspection.

FUCHS COMPANY (BORG ELARAB INDUSTRIAL ZONE)

Prepare (ITP) for 14 Tanks with Different DAIAMETER.

Prepare W.P.S & P.Q.R for Piping System according to Specified Code.

Prepare Welding Qualification Tests W.Q.T & Conduct the Test.

Monitoring of all Welding Operation to Assure Compliance with Specified Code for Tanks.

2007 - 2008 Egyptian Ship Repair & Building CO. - Egypt

Witness of welders qualification tests.

NDT for all welds on the ships.

Thickness survey of most mainly ship equipment.

Treatment the surface corrosion by sand blasting & pressurized water.

Hydro test for all pipes & valves on the ship.

Maintenance for all crank shafts by the ultrasonic waves & magnetic particles test.

2005 - 2006 ESACO Company (Borg El-Arab Industrial Zone)

Alexandria, Egypt

Production line of different steel structure & equipment’s.

Monitoring of all welding operation.

Make all N.D.T for different welds.

Prepare welding qualification tests.

Skills

Have high sense of urgency and able to make effective discussions in a timely manner

Highly professional telephone manner and effective at managing difficult callers

Identifying daily tasks that need to be done and delegating them through effective communications

Building professional relationships with all sales stuff

Communicating key messages to team member.

Meeting and exceeding all agreed performance objectives.

Extensive sales and customer service supervisory in the service sector.

Patient and calm under pressure.

Possessing a high level of drive and determination.

Languages

Arabic: Native

English: Excellent

Contact this candidate