Quality Manager Follow Up

REY ANUAR AMADOR RODRIGUEZ

Bachelor's degree: Chemical Engineering

University: Tecnologico de Matamoros (1991-1996)

Master's degree: Manufacturing Businesses Management.

Master's degree: Administration and Leadership

Lead Auditor ISO/TS 16949:2009 (Expired certificate).

Diploma: Manufacturing – Plus Leadership

Lead Auditor: ISO-14001:2015, & ISO: 45001:2016 (Expired certificate).

Address: Matamoros Tamaulipas Mexico.

Cell Phone +52-868-***-**-**

Email: ********@*****.***.**

Training Industry Experience

GD&T (Geometrical Dimensioning & Tolerance). Truck Industry

CQE-ASQ (Training) Automotive Industry

PDF (Process Diagram Flow Chart) Process Experience

PCP (Process Control Plan) Metal finishing (Electroplating and Paint Process)

FMEA (Potential Failure Mode and Effects Analysis). Stamping

APQP (Advanced Product Quality Planning). Mechatronic Process.

PPAP (Production Part Approval Process Assembly

IMDS (International Material Data System). Fiberglass Molding

S.P.C. (Statistical Process Control). Sewing Process

Effective Problem Solving. Cutting Process

MSA (Measurement System Analysis). Thermoforming, Extrusion.

IATF 16949 (Internal Auditor), A-Next Cell Manufacturing, Plus Leadership. Electronic (Radius)

WorksExperience

STS Manufacturing (June 2024 – September 2024) “Small Company”

Company dedicated to metal finishing to automotive industry, electroplating, Zinc Nickel, Tin, phosphate, E-coat, power coat, etc

Plant Management (Temporary Job)

1.- Monitoring of the plant's daily production, ensuring operational efficiency.

2.- Implementation of continuous improvement strategies, to increase productivity and efficiency.

3.- Monitoring and coordination of preventive and corrective maintenance of machinery.

4.- Follow up and control of budget.

5.- Follow up to and revision of new product introduction.

6.- Follow up and revision of customer complaints with the team.

7.- KPI revision and follow up corrective action implemented.

Merit Automotive System de México (January 2023 - August 2023)

Manufacturing Company: Mecatronic Assembly Parts (Automotive)

Customers: Stellantis, GM, Ford, Volvo, Chrysler, Navistar.

Quality Manager.

1.- Understand customer needs and requirements to development effective with the purpose to reinforce the customer relationship.

2.- Follow up activities of Quality Engineer, Technicians, inspectors,

3.- Follow up the engineering change into all áreas (ECOs, PCRs, DEV) and validation requirements

4.- Coordinate the warranty claims, follow functional testing, common product analysis, etc.

5.- Follow APQP, PFMEA, PPAP, PCP, Gage R&R, CPK studies. Analysis skills (problem solving disciplines 8D'S, 5 whys, etc.), KPI's.

6.- Daily, weekly and Monthly reports. Kpis

7.- Follow up LPA product, process and Safety audits.

8.- Follow up visits of customers, external audits,

Panasonic Automotive (Jun 2017 January 2023)

Manufacturing Company: Automotive Radius

Customer: Ford, Mazda, Honda, Chrysler, GM, Nissan

OQA Manager (Outgoing Quality Assurance Manager )

1.- Understand customer needs and requirements to development effective Outgoing Quality Assurance with the purpose to reinforce the customer relationship.

2.- Supervise Quality Engineer, Technicians, Supervisors, Coordinator, Inspectors, material handler (115 total personal)

3.- Follow up the engineering change into the OQA area (ECOs, PCRs, DEV) and validation requirements

4.- Coordinate the warranty claims, follow functional testing, common product analysis, etc.

5.- Follow APQP, PFMEA, PPAP, PCP, Gage R&R, CPK studies. Analysis skills (problem solving disciplines 8D'S, 5 whys, etc.), KPI's.

6.- Monthly Kaizen events.

7.- Follow up LPA product, process and Safety audits.

8.- Follow up NPL activities to introduction new models.

8.- Tracking shipments and delivery On Time. Follow up downtime, lost cost and efficiency to carry out improvement actions.

Hutchinson FMS LP (December 2016-Jun 2017)

Manufacturing Company: Thermoforming, End forming Aluminum, Soldering Brazer and Tig

Customer: Ford, Kautex, Chevrolet, GM, Mercedes,

Quality Manager

1.- Understand customer needs and requirements to development effective quality control process with the purpose to reinforce the customer relationship.

2.- Review specifications for products and process.

3.- Supervise Quality Engineers, technicians, auditors and Inspectors.

4.- Keep accurate documentation and perform statistical analysis.

5.- Submit details reports appropriate executive. Be on the lookout for opportunities for improvement and development of new efficient procedures.

6.- Follow the proper effective implementation of Quality System throughout assigned facilities

7.- Quality Performance reporting (scrap, rework, PPM'S returns, etc.)

8.- Follow APQP, PFMEA, PPAP, PCP, Gage R&R, CPK studies. Analysis skills (problem solving disciplines 8D'S, 5 whys, etc.)

9.- Follow up Kaizen event.

TSTech Industrias Tricon de Mexico (April 2014- December 2016)

Manufacturing company cover seats for the automotive industry

Customers: TSTech Company, Tier Two Honda & Mazda

Quality System Coordinator & Continues Improvement

1. - Quality System Assurance (ISO 9000) and Corporate Standards Compliance

2. - Manuals, procedures and work instruction developments.

3. Lead of transition of ISO-9000 thru ISO/TS 16949.

4. - Coordinate the internal and external audits.

5. - Coordinate the calibration process.

6. - Problem solution in process

7. - Kaizen events participating, Continues improvement (metal detection).

8. Monthly Report to corporative.

9. - Process Audits, LPA / CAPA Audits, .- Document control administration and registers

10.- Corrective Action Validation.

11. - Participation in PCP (Process Control Plan) /PFMEA

KEY SAFETY SYSTEM DE MEXICO. KSS (July 2011- April 2014)

Manufacturing Company Automotive Safety Systems: Air Bags, Inflators and Seat Belts.

Customers: Ford, GM, Chrysler, VW, BMW

Incoming Inspection Supervisor / Quality Engineer Sr.

1. - Supervisor of Incoming auditors, Supervisor of Technical Metrologies, Supervisor of Hold Area and Sort, coordinate the packing inspection.

2. - Coordinate and development control plan to incoming inspection process.

3. - Follow to supplier complaints, Development visual aids.

4. - Teamwork with ASQ'S and the PPAP coordinators.

5. - Follow to reports by week (internal) and monthly (corporative)

6. - Phased Audits in process, Problem solution in process.

7. - Follow to disposition of material in hold area and daily meeting.

8.- Follow to introduction or change levels in components with engineering team.

CORECOMPOSITES DE MÉXICO S DE R.L. DE C.V. (July 2005 July 2011)

Company dedicated to fiberglass molding and plastics reinforcement to Truck Industry

Industrial Park Las Ventanas Matamoros Tamps.

Customers: Paccar, Navistar, Daimler, Bombardier, SPX, American LaFrance,Thomas Built, Andrew, Volvo, Bestop, Easy Road, Mack Truck, Lund, Luverne.

Sr. Quality Engineer.

1. - Maintain the quality system (ISO TS: 16949:2009)

2. - Coordinate the internal audits.

3. - Development and coordination the corrective action to customer.

4. - Coordinate preventive action.

5. - Flow charts, APQP, PFMEA (Process Failure Mode and Effects Analysis), PCP (Process Control Plan).

6. - Customer visits to follow customer complaints.

7. - Development WI (work instruction) and visual aids.

8. - Participation in Kaizen events.

9. - Coordinate the calibration process.

10. - Coordinate the incoming inspection area, Supplier development, Suppliers visits to follow quality issues or audits.

11. - Request and revision PPAP to suppliers and participation of PPAP to customer.

12. - Review the corrective action provided by suppliers.

13. - PPM'S graphics to management by week.

14. Monthly report to the customers.

15. - Problem solution in process.

16. - Communication whit customers and suppliers.

17. - Review, approve and development IMDS (Customer and Supplier).

Product Engineer

1. - Development of new products.

2. - Continues improvement in products delivered, Development of corrective action and Problem solution in process.

3. - Follow the issues in products into the process. Packing Design.

4. - APQP, PFMEA (Process Failure Mode and Effects Analysis), PCP (Process Control Plan).Development of Process Flow charts.

5. - Customer visits to follow customer complaints.

6. - Development WI (work instruction) and Visual Aids.

7. - Participation in Kaizen events.

8. - Monthly report to customer. Communication whit customers.

9. - Development of PPAP (Production Part Approval Process).

10. - Development Bill of Materials (BOM).

11. - Design of experiments (DOE), GR&R (Gage Repeatability and Reproducibility Report).

RECUBRIMIENTOS INDUSTRIALES FRONTERIZOS S.DE R.L. DE. C.V. (July 1997- JULY 2005)

Company dedicated to metal finishing (electroplating) to automotive industry /stamping process.

Customers: Delphi Electronics, Gobar, GW, Siemens, BBB Industries, Pentair, Siltech, Corning, Ametek, Olson, Small Part, Landis+ Gyr,

Quality Engineer (3 years) / Quality Manager (5 years)

1. - Maintain and coordinate the quality system (ISO 9000). Coordinate the internal audits.

2. - Follow the issues in products into the process.

3. - Follow the APQP process.

4. - Development of Process Flow charts, Development of PFMEA (Process Failure Mode and Effects Analysis) and Development of PCP (Process Control Plan).

5. - Customer visits to follow customer complaints.

6. - Development WI (work instruction) and Visual Aids.

7. - Development of corrective action, Problem solution in process (Corrective actions (8D, 5 Why s).

8. - Communication whit customers, PPM S report.

9. - Development of PPAP (Production Part Approval Process).

10. - GR&R (Gage Repeatability and Reproducibility Report).

11. - Coordinate the Preventive actions.

12. -Quotations on new products, Rack's design.

13- Design of experiments (DOE)

SERVICIOS DE INGENIERIA INDUSTRIAL S. DE R. L. DE C. V. (11996-1997 Customers: Industrial Park

Lab Supervisor

1. - Process and residual water analysis. Preparation of solution.

2. - Lab supervisor, Internal Audits

3. - Analysis of emission to the atmosphere, and analysis of dangerous residuals (C.R.E.T.I.B.).

SERVICIOS AMBIENTALES HARDT S. DE R. L. DE C. V. (1995-11996 Customers: Industrial Park

Lab Supervisor NOTE: The same activities that last job

EQUIPMENTS: Micrometer, Caliper, Heights, Measurer, Thickness Caliper

SOFWARES: Microsoft Excel, Microsoft Word Perfect, Microsoft Power Point, Outlook

Microsoft SQPack2000, MINITAB, QAD, AS-400 (CMS), SAP

LANGUAGE:

English (Spoken and written)

Spanish (Spoken and written)

Anuar Amador

H. Matamoros Tamaulipas Mexico, March 2025

Contact this candidate