Quality Control Inspector

MOHAMMED FADLALLA

*************@*****.*** 210-***-**** Greensboro, NC 27408

Summary

Quality control inspector and Airframe Powerplant Mechanic successfully performed inspection and skilled maintenance and repair services and supports group efficiency. Experience handling preventive, corrective and predictive maintenance actions on Boeing and Airbus aircrafts. Dedicated to helping team excel with high-quality work. Dedicated and highly proficient A and P Mechanic with valid air frame and powerplant certifications and solid history of success in working closely with colleagues and flight professionals. Self-directed in inspecting aircraft and diagnosing problems. Systematic and conscientious with comprehensive understanding of aircraft systems. Meticulous A&P skilled in executing aircraft repair and maintenance on various models, including Boeing fleets, Airbus families and corporate aircrafts. Currently FAA Airframe and Powerplant licensed with demonstrated success in completing repair and installation work with efficiency and accuracy. Productive aircraft service professional bringing an extensive history of service and inspection on varied model aircrafts. Aiming to fulfill a role in which to leverage in-depth industry knowledge and a diverse skill set acquired over [20] years of service in the aviation landscape. Detail-oriented aircraft professional bringing a proven history of effectively directing, monitoring or performing preventive and unscheduled maintenance on aircrafts. Strong knowledge of standard hardware and materials with an insatiable curiosity of new industry materials and techniques. Organized and motivated employee eager to apply time management and organizational skills in various environments. Seeking opportunities to expand skills while facilitating company growth. Motivated new student seeking internship in aviation field to gain hands-on experience. Outgoing and friendly with strong drive to succeed.

Skills

Inspections proficiency

Compliance standards

Refinishing abilities

Technical documentation reading

Attentive to detail

Safety protocol knowledge

Identifies, installs and removes common aircraft fasteners

Reliable & trustworthy

Decision-making

PPE use

Team building

Organizational skills

Team management

Supervision & leadership

People skills

Troubleshooting skills

Experience

Spirit Aero Systems, Kinston, NC

Quality Control /QA Inspector

01/2023-Present

Boeing Aircraft Co./Contract

Charleston, SC

Flight line Quality Inspector

10/2022-01/2023

North State Aviation/Aero team Winston Salem, NC

A&P

10/2020 - 09/2022

Performed visual inspection on primed and painted clips per spirit specification and drawings.

Performed viscosity test for primer, topcoat and wettability test on Aircraft parts.

Performed visual and final inspections on frames, panels and structure

Inspected A/C Components for delamination, edge seals damage and cracks.

Inspected A/C frames for damages and fasteners installation.

Witnessed torque and removal and installation of components performed by the flight line mechanics.

Performed general visual, detailed and zonal inspections on the aircraft systems and structure.

Wrote pickup for nonconformance parts.

Carried out maintenance work for MRO holdings in Winston Salem, NC

Followed Standards, procedures, General Maintenance, Quality control manuals, all applicable regulations and specifications

Performed maintenance C checks on B737NG, Airbus 320/321 (OASIS MOD), and B737-8Max

Removed and replaced aircraft structure and powerplant components that require bolting, torqueing, adjusting, rigging, and safety wiring that included flight controls, engines, and A.P.U.

Troubleshot, repaired, cleaned, serviced, inspected, modified, replaced aircraft and aircraft systems using approved data such as aircraft maintenance manual ETC.

Followed all applicable specifications to accomplish a specific task

Maintained a clean and safe working environment's

Performed work within estimated hours

Followed all safety procedures and specifications

Executed all required paperwork in connection with assigned normal duties

Worked with little supervision and accomplished assignments with little or no rework

Used and operated ground support equipment as applicable in safe manner

Removed, Inspected and reinstalled sidewalls ceiling, overhead and cargo panels for delamination and cracks

Inspected galleys for any damages and improper operation

Removed and replaced cabin floorboards

Removed and replaced cabin equipment’s

Removed and installed new cabin seats per engineering drawings

Checked door slides for proper operation

Performed torque checks on cabin seats, flight attendants and cockpit

Performed service checks on Engines, A.P.U, Hydraulics systems, Landing gears and flight controls.

Spirit Aero systems Kinston, NC

Assembly Tech.05/201*-******

Worked on the new Airbus 350 Forward Lower Systems (FLS) structure components in the frame shop using Airbus Engineering Drawings and other applicable manufacturing on line manuals

Drilled holes using drill guides in Fan Boxes (-900+1000) (R/H and/H.), and structure components including fiber carbons panels

Inspected holes’ sizes (3/32-3/16) for any damages or over-sized holes using Go-No-Go gauges

Assembled Fan Boxes using AD rivets (3/32-3/16) using a rivet set and a gun.

Inspected rivets heads and tails for damages, proper installations and tail heights using height gauge

Prepared surface areas for electrical bond fasteners

Installed electrical bond rivets and fasteners

Torqued fasteners per (Engineering Drawings

and structure manual).

Performed resistance check on electrical bond fasteners using electrical bond meter per Engineering Drawings

Sealed electrical bond fasteners and painted per Engineering Drawing.

Drilled titanium structure components and installed titanium rivets

Drilled carbon fiber structure components, inspected and installed Huck -rivets using Huck-rivets gun

Countersunk holes per Engineering drawings.

TIMCO Special Services/ A&P/contract

11/2018 - 03/2019,Greensboro,NC

Worked on KC-10 aircraft performing (C) checks on various aircraft's systems, engines and structure.

HONDA JET/YOH Greensboro, NC

QC INSPECTOR

08/2018 - 10/2018

Performed inspections of prototype carbon fiber aircraft structure, sub-structure and systems components installations in accordance with Honda Jet engineering drawings, specifications, and FAA approved data

Performed conformity inspections of components, major assemblies, sub-assemblies, and parts during manufacturing, modifications, and installations to determine conformance to applicable drawings, specifications, quality standards, and manufacturing plans

Witnessed process and performed shakedown inspections of completed sub-assemblies/final assemblies and major components

Observed and performed in process and completed aircraft operational checkout of electrical, avionics, mechanical, oxygen, hydraulic, fuel, and pneumatic systems to determine structural and functional soundness of aircraft

Identified, documented, and tracked discrepancies using SAP

Used a variety of inspection aids, and precision testing and measuring equipment's such as ohmmeters, flashlights and mirror, calipers, feeler gauges, scales, ball gauges, micrometers, etc.

As necessary to determine proper adjustment and operation of aircraft systems

Entered electronic data related to aircraft production, completion, and installation operations

Inspected manufactured products and processes for conformity and compliance to Honda Jet and FAA.

HAECO,/A&P

04/2018-06/2018,

Worked on B737-700/900 performing (C) check

Performed inspections of engines components in accordance with applicable maintenance manual

Removed and replaced wheels and brakes

Serviced engines, hydraulics and A.P.U.

Lubricated flight controls and Landing gears

Removed and reinstalled door liners and emergency slides

Performed operational check of flight controls.

VT MAE Aerospace/, A&P Lead AL

10/2015 - 02/2018 /APA

Worked on A330-200 aircraft/Rolls Royce engines and B757/RB211, A320/A321 &B777-200/300&B737-700/900 performing A &C checks

Inspected wings leading edges anti-ice ducts for cracks

Inspected rudder power control actuators for damages and leaks

Opened vertical and horizontal stabilizers panels for inspections

Performed general visual inspection of main landing gears and nose gear for leaks and any obvious damages

Removed, inspected and re-installed A.P.U exhaust duct.

Removed thrust reversers haves, re-installed and performed operational checks in accordance with Aircraft Maintenance Manual.

Inspected all cabin doors and cargo doors structures for cracks and irregularity defects

Removed, inspected and re-installed leading edges slats

Removed and reinstalled L/H and/H wings fixed and movable fairings

Performed horizontal stabilizer open up and inspections

Serviced engines, A.P.U and hydraulic systems,

Lubricated main and nose landing gears

Removed, cleaned, inspected, reinstalled and rigged(FWD&AFT) cargo doors eccentric bushings in accordance with aircraft maintenance manual

Performed general visual inspection of cargo doors lock fittings and loading systems

Performed zonal inspection of rear fuselage (EWIS)

Performed general visual inspection of A.P.U suspension system including shock mounts structure and brackets in accordance with A330-200 MM

Performed detailed inspection of A.P.U “v” clamp and exhaust duct heat isolation in accordance with A330-200 MM.

AAR/ STROM Lake Charles, LA

A&P

04/2015 - 06/2015

Read and interpreted maintenance manuals, service bulletins, and other specifications to determine the feasibility and method of repairing or replacing malfunctioning or damaged components

Inspected completed work to certify that maintenance meets standards and that aircraft are ready for operation

Conducted routine and special inspections as required by regulations

Examined and inspected aircraft components, including landing gear, hydraulic systems, and deicers to locate cracks, breaks, leaks, or other problems

Inspected airframes for wear or other defects

Maintained, repaired, and rebuilt aircraft structures, functional components, and parts such as wings and fuselage, rigging, hydraulic units, oxygen systems, fuel systems, electrical systems, gaskets, and seals

Maintained repair logs, documenting all preventive and corrective aircraft maintenance

Measured parts for wear, using precision instruments

Tested operation of engines and other systems, using test equipment's

Assembled and installed electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand or power tools

Obtained fuel and oil samples and checked them for contamination

Reassembled engines following repair or inspection and reinstalled engines in aircraft

Installed and aligned repaired or replacement parts for subsequent riveting or welding, using clamps and wrenches

Modified aircraft structures, systems, or components, following drawings, schematics, charts, engineering orders, and technical publications

Replaced or repaired worn, defective, or damaged components, using hand tools, gauges, and testing equipment

Serviced and maintain aircraft and related apparatus by performing activities such as flushing crankcases, cleaning screens, and lubricating moving parts

Cleaned, stripped, primed, and sanded structural surfaces and materials to prepare them for bonding

Examine engines through specially designed openings while working from ladders or scaffolds, or use hoists or lifts to remove the entire engine from an aircraft

Removed and reinstalled wheels and brakes on A330-200 aircraft

Removed and reinstalled Rolls Royce engines using hoist.

NORTHROP GRUMMAN Lake Charles, LA

SCA. Mechanic

03/2014 - 04/2015

Worked on KC-10 aircraft

Removed and reinstalled engines

Serviced hydraulic, engines and A.P. U. Removed and reinstall access panels from wings and fuselage.

Removed and Reinstalled Aerial refueling boom

Lubricated landing gears

Removed and replaced wheels and brakes

Inspected, removed and installed engines components in accordance with applicable maintenance manuals

Removed and reinstalled engines thrust reversers

Performed operational checks of engines pneumatic systems.

AAR Lake Charles, LA

A&P Mechanic

09/2013 - 02/2014

Worked on A330-200/Rolls Royce engines/RB211Trent700 series

Preformed (C) Participated in (C) check on A330-200/Rolls Royce engines/RB211 Trent 700 series

Removed and replaced aft flaps track links (2 through 4.) Checked all main cabin doors locking mechanism for proper operations when armed

Performed manual operation of FWD.

And AFT cargo doors

Serviced flap torque limiter. Serviced flight controls

Removed and reinstalled A/C bay heat -ex changers, plenum and ducts.

BOEING AIRCRAFT'S CO. /PDS San Antonio, TX

A&P Mechanic/General

05/2011 - 11/2012

Worked on B-747-8F&Genex-2B. Performed different types of maintenance tasks using on line work instructions (OWI), engineering drawings and other manufacturing data

Removed and reinstalled Genex-2B engines using hoist

Removed and replaced fight test equipment from airframe and engines. Removed and replaced Hydraulic and pneumatic lines from pylons and engines

Rigged thrust reverses systems and checked them for proper operations

Performed final components installation and operation test Serviced hydraulic systems, thrust reverses and pneumatics

Received formal trainings and certificates on B-787 Dreamliner.

Dallas, TX

Driver

12/2009 - 05/2011

Test vehicle equipment such as lights, brakes, horns, or windshield wipers, to ensure proper operation

Arrange to pick up particular customers or groups on a regular schedule

Notify dispatchers or company mechanics of vehicle problems

Complete accident reports when necessary

Communicate with dispatchers by radio, telephone, or computer to exchange information and receive requests for passenger service.

PEMCO WORLD AIR SERVICE Dothan, AL

A&P Mechanic/STS

06/2009 - 11/2009

Worked on MD-11 Aircraft

Preformed (C) checks on various aircraft systems

Removed, inspected, repaired and flight controls components and panels

Removed and reinstalled interior equipment such as seats, sidewalls, ceiling panels and overhead panels.

AMERIFLIGHT/STROM Dallas, TX

A& Mechanic

02/2009 - 04/2009

Worked on EMB-120 and Beechcraft1900.Performed (C) check on all aircraft systems in accordance with manufacturers and airlines manuals

Performed line checks on aircraft exterior and Interior.

PEMCO/Plane Techs. Dothan, AL

A&P Mechanic

10/2008 - 12/2008

Worked on A319/A320 (CFM-5engines) performing (L) checks

Removed and replaced wheels and brakes

Serviced engines and brakes

Removed and reinstalled heat exchangers.

US HELICOPTER/PLANE TECHS Ozark, AL

A&P Mechanic

09/2008 - 10/2008

Worked on Huey2 helicopters assembly line

Assembled and installed flight deck windows and seats

Removed and reinstalled collective and cyclic pitch controls.

SAN ANTONIO AEROSPACE/GSI San Antonio, TX

A&P Mechanic

09/2007 - 08/2008

Worked on B-757, B-737-800, DC-10, and-747-200

Performed (C) checks in accordance with applicable maintenance manuals

Removed and reinstalled leading edges panels, flap fairings, liners and cabin interiors

Rigged main entrance door and performed other maintenance tasks.

PEMCO/PLANE TECHS Dothan, AL

A&P Mechanic

03/2006 - 05/2008

Worked on A300, MD-88 and B-737-400

Performed (C) checks on aircraft structure and engines.

SAA/STROM San Antonio, TX

A&P Mechanic

05/2007 - 08/2007

Worked on A300-600 aircraft

Performed (C) checks on aircraft systems and Structures in accordance with manufacturer's maintenance manual

REEBAIRE AIRCRAFT'S/PLANE TECHS Hot springs, AR

A&P Mechanic

10/2006 - 02/2007

Worked on CR J-200/700 and Challenger

Performed (C) checks in accordance with Bombardier maintenance manuals

Removed, inspected and reinstalled wings leading edges

Removed and replaced engine pneumatic valve

Removed cabin seats, carpets and floorboards for inspections and reinstalled them.

AeroframedServices Lake Charles, LA

Heavy Maintenance A&P Mechanic

07/2006 - 10/2006

Worked on A310 and A300-B4 aircrafts

Performed (C) checks

Executed daily work assignments on different sections of the aircraft such as wings, landing gears, fuselage and cabin.

Operated hand and power tools to complete repairs.

Maintained clear and safe workspace areas to meet OSHA standards.

Installed new systems, replacement parts and components to maintain proper operation.

Used micrometers and calipers to inspect disassembled parts for wear.

Checked electrical components to identify defects and hazards and make necessary adjustments.

AAR/STROM Oklahoma City, OK

A & P Mechanic

11/2005 - 04/2006

Worked on B-737-400

Performed (C) on aircraft systems, structure and engines

Removed and replaced Hydraulic falters and fuses

Serviced engines and A.P.U and etc.

Maintained clear and safe workspace areas to meet OSHA standards.

Installed new systems, replacement parts and components to maintain proper operation.

Operated hand and power tools to complete repairs.

PEMCO/AIRPLANES Dothan, AL

A&P Mechanic

06/2004 - 09/2005

On DC-9, B-727-200, B-737-300, B-767 and MD

88

Performed (M) and (C)checks in accordance with manufacturers maintenance manuals.

SPIRIT AIRLINES/SHARP AVIATION Fort Worth, TX

02/2003 - 04/2004

Worked on MD-80 aircraft

Performed (C) check on aircraft systems and Structures per applicable aircraft maintenance manuals such as repairing pressurization leaks etc.

DALFORT AEROSPACE/A&P Lead Dallas, TX

04/1998 - 12/2002

Worked on B727-100/200, B737-300/400, DC-8 and DC-9

Performed (C) and (D) checks on major and sub-major aircraft systems

Removed and reinstalled wings leading edges Slats, Krueger flaps, trailing edge flaps, spoilers and A.P.U

Replaced Slats and flap Rollers

Removed and reinstalled heat exchangers

Pressurized aircraft in order to check for leaks

Repaired fuselage leaks

Removed and reinstalled flow control valves, air conditioning ducts, flow multiplier and temperature sensors

Rigged trailing edges flaps

Troubleshoot and repaired main cargo door systems

Serviced engines, hydraulics, brakes accumulators and etc.

TRANS STATES AIRLINES Washington, DC

A&P Mechanic

09/1996 - 02/1998

Worked on Jet stream 4100 aircraft as line and hangar mechanic. Performed daily scheduled work package such as removal and replacement of fuel nozzles, clearing deferred maintenance items, clearing captain's write ups and signing off aircraft log book to return to service

Serviced engines, hydraulics, crew and passenger’s oxygen systems

Removed and replaced wheels and brakes

Performed pre-flight inspections

Performed engines run up and taxing aircraft to the gate

Towed aircraft and performed operation checks on aircraft systems.

Education and Training

N D T Certificates in Penetrant Testing per NAS410 (32hrs) Level l&ll. Eddy Current Testing Level l&ll (80hrs) per NAS410.Ultrasonic Testing Level(l&ll) (80hrs) per NAS410. Certificate of training from FAA in

01/2004

University of District of Columbia Washington DC

Aviation in Maintenance Technology

12/15/1995

Additional Skills A&P License's#3540765. B-727 Familiarization course (40hrs). B-737 Familiarization course (40hrs). B-747-8F computer base Familiarization course (40hrs). B-787 tier 1 Familiarization course (40hrs). Jet stream 4100 Familiarization course (80hrs).

Alabama FAA District Office

silver award Certificate

Contact this candidate