Piping Designer Plant 3D

Steve Hunter

Autodesk Plant *D & CadWorx *D Piping Designer, Navisworks Checker

Bellville, TX.

************@*****.*** 979-***-****

Experienced Facility Design Leader, Sr. Piping Designer/Checker/Sr. Lead Piping Designer over projects that range from large RNG, Chemical plants, Midstream gas plants, Compressor Backhaul projects, Offshore Platform Oil & Gas Facility Design, Oilfield Process Equipment Design. 22 years total AutoCAD through 2016 experience. Prepared Manhour budgeting, staffing levels, reporting. Utilized Navisworks to check piping isos as workflow. 14 years’ experience and proficient in Autodesk Plant 3D and CadWorx 3D software for solid modeling and Isogen Isometric Extraction; also proficient in Navisworks Manage Software. Plant 3D Piping Designer/Checker

BAE Systems, Kingsport, TN 4-2024 to present

Plant 3D Checking piping against point cloud model for RDX and NDX production facilities in Kingsport DOD Holsten Army Ammunition Plant I n Kingsport, Tennessee Cadworx 3D Piping Designer

Novilla, LLC – Katy Texas, 2-2023 to present

Cow Manure Renewable Natural Gas (RNG), Cad Worx 3D Piping Design for production facilities in S. Dakota, Cadworx Piping Specs, Checking.

Navisworks 2023 for design and checking

Autodesk Plant 3D Piping Designer

in GRIT, LLC –The Woodlands 1-2022 to 10-2023

Plant 3D Piping Design, setting up Plant 3d Piping Specs, Checking, Stress Analysis, Issuing Isometrics to construction site.

Design of Fatty Amine Hydrogenation and Nitrilation Chemical Complex for client in Adana, Turkey Autodesk Plant 3D and CadWorx, Facility Design Leader/Checker EXP, Inc. 04-2018- 12-2021

Utilized Autodesk Plant 3D, setting up Plant 3d Piping Specs & CadWorx with Isogen, Checking on Navisworks,

Pre-engineering and Plant 3D design study on Holsten Munitions plant- Acetic Anhydride facilities upgrade

Stratosfuel- SMR Hydrogen Plant in Victorville, Ca.-Steam – Methane Reformer and Water Electrolysis Wheatland- Wheat Gasification – Modularization of Piping Modules Veolia- Sulfuric Acid plant in Laporte, Texas.

Autodesk Plant 3D and Isometrics, Onsite Piping Construction Support STS, Consulting Services, LLC 12/2017 – 04/2018

Plant 3D Piping Design and construction support for STS Engineering – Construction of 60MM Cryogenic Midstream Gas Plant in Orla, Texas.

CadWorx and Isogen, Sr. Piping Designer/Checker

MFS Piping and Industrial, LLC 02/2017–12/ 2017

CadWorx 3D and IsoGen, Responsible for Vessel, Skid and Piping design for Oilfield process equipment fabrication drawings.

Piping Designer/Lead Checker/CadWorx 3D Piping

SKW Enterprise Solutions 11/2015 – 10/2016

Responsible for Design Coordination/Checking for Energy Transfer 4 Compressor Sites backhaul conversions. Utilized CadWorx 3D and Leica Point cloud LIDAR Scanning for Brownfield Modeling. Sr. Piping Designer/Checker

TEC Engineering, Inc. 11/2014 – 06/2015

Piping Designer for Field walk downs for numerous Apache Corp. Gas Production Facilities in the Texas area.

CadWorx 3D Piping Designer/Checker, Isogen and Navisworks Optimized Process Designs, (OPD) 11/2013 – 8/2014

Utilized Cadworx 3D and Isogen, Sr. Piping Designer/Checker on Rebel Gas Plant, 200MMSCFD for Energy Transfer; built multiple models of Amine and Glycol systems, isogen piping isometrics; Checked areas with Navisworks.

Facility Design Leader

Sr. Lead Piping Designer/Checker/CadWorx 3D Piping Designer AZOTA, LTD. 11/2011 – 11/2013

Facility Design Leader, CadWorx 3D Piping Designer and Sr. Lead Piping Designer for facilities on 200 MCFD Cryogenic Gas Plant for DCP Midstream; Onsite Construction Management, Utilized Cadworx 3D software.

CadWorx 3D Piping Designer – Vessel and Production Skids EXTERRAN - Columbus 01/2011 – 11/2011

2D and 3D Vessel, Piping, Skid design, Iso extraction, BOM’s on numerous skids. Sr. Piping Designer – Offshore Facilities

NOVA CONSULTING SERVICES 04/2005 – 01/2011

Sr. Piping Designer on numerous offshore production facilities. Compressor additions, water skimmers, etc. Most projects required field trips to obtain dimensions for tie-in. Complete offshore production faculties’ refirb.

Vessel design, Skid Design, Interconnect (ICP) design, Isometric generation. Sr. Piping Designer – Offshore Facilities

OFFSHORE SPECIALTY FABRICATORS, INC. 05/2001 – 04/2005 Sr. AutoCAD Piping Designer of new and existing offshore production platforms. Vessel design, Skid Design, Interconnect (ICP) design, Isometric generation. Structural support design

Facility Design Leader

Sr. Lead Piping Designer/Checker/Sr. AutoCAD Piping Designer PINNACLE ENGINEERING, INC. 08/1995 – 05/2001

Responsible for Leading team of 6 piping designers on numerous offshore production platforms in GOM.

Also was Facilities Sr. Lead Piping Designer, responsible for staffing and scheduling of the design department.

Sr. Piping Designer/Checker – Offshore Facilities

CBS Engineering 03/1993-08/1995

Sr. AutoCAD Piping Designer of new and existing offshore production platforms. Vessel design, Skid Design, Interconnect (ICP) design, Isometric generation. Structural support design

Sr. AutoCAD Piping Designer

S & B ENGINEERS AND CONSTRUCTORS, LTD. 03/1992 – 03/1993 Sr. Piping Designer for numerous in-plant projects in Shell Dear Park and Amoco Texas City Refineries, on miscellaneous piping design jobs

Piping Designer – Offshore Facilities

OMEGA MARINE, INC. 09/1989 – 03/1992

Sr. AutoCAD Piping Designer of new and existing offshore production platforms. Vessel design, Skid Design, Interconnect (ICP) design, Isometric generation. Structural support design

Piping Designer – Onshore Facilities

JOHN BROWN E & C 06/1987 – 09/1989

Sr. Piping Designer for Mobil Chemical Polyethylene Modernization Project – Design of dry ends compounding building, surge, and chemical additive silos. Piping Designer – Offshore Facilities

EARL & WRIGHT ENGINEERS 06/1981 – 03/1985

Piping design of offshore gas production and drilling platform. The design involved high-pressure piping and submerged sea routing.

Piping Designer – Offshore Facilities

HYUNDAI HEAVY INDUSTRIES 09/1982 – 06/1987

Piping design of offshore production platform complexes, Dubai, Saudi Arabia – Coordination of production and compressor platform; design utilized high-pressure piping and valving. Draftsman

MONARCH SEPARATORS, INC. 01/1977 – 09/1982

Draft shop drawings of atmospheric plate and vessel and piping design of oil-water separators for petrochemical and offshore installations.

Contact this candidate