Maintenance Technician Manager
Resume:
Josh Chaney
Electrical Maintenance Technician
Marion, OH 43302
*********@*****.***
************@*****.***
or
*********@*****.***
Work Experience
Maintenance Manager National Guard
Ohio Adjutant General's Department-Marysville, OH
April 2023 to Present
• Under general supervision of the Building Maintenance Superintendent this position will Install and replaces lighting fixtures, light bulbs, ballasts, switches and fuses for building lighting, outside lighting, runway/taxiway lighting & lighting detection systems.
• Maintains and repairs all electric control lI wiring systems, fixtures, controls & equipment.
• Climbs power poles to install, maintain and repair items Controls Engineer
Mars Pet Care USA-Columbus, OH
August 2021 to November 2023
• Works on rotating shift basis as an integral part of a specific rotating team
• Supports operational team with day-to-day improvement and troubleshooting of software applications and PLC controls with maximum focus on increased reliability
• Electrical and controls support for operations and maintenance
• Perform predictive and preventive maintenance
• Interpret and maintain electrical schematics
• Implement small scope projects in assigned areas
• Identify, design and implement controls improvement solutions
• Interface with contractors, vendors, engineering, maintenance and operations
• Perform root cause analysis on process interruptions
• Work with engineering on specific electrical and or controls projects from design to startup, including HMI and PLC programming, installation, checkout, start-up and training
• Provide on shift - plant wide support (including overtime coverage for vacancies) for diagnosing, troubleshooting, and resolution of Level I (PLC/Servos) and Level II (HMI) system related problems TSS Electrical/Robotics
US Yachiyo Inc.-Marion, OH
March 2021 to June 2022
• Robotic Programming and Tool handing on Quality adjustments
• Use Mitsubishi Plc and Omron Pics to detect issues and make adjustments inspected and tested machinery and equipment; made adjustments and repairs as needed.
• Troubleshooted machines and equipment to detect malfunctions; discusses machine operating abilities with supervisors or other maintenance workers to diagnose problems or repair equipment.
• Troubleshooted Blow mold equipment that needs fine adjustments and fabricate repairs as needed.
• Made adjustments to Helium Leak Testing machines and equipment, so product conforms to quality standards.
• Dismantled defective machines or equipment and installs new or repaired parts.
• Installed and repairs electrical apparatus, such as transformers and wiring, and electrical or electronic components.
• Cleaned and lubricates shafts, bearings, gears, and other parts of machinery.
• Rayed out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic equipment, gauges, valves, pressure regulators, and related equipment.
• Repaired and maintains physical structure and appearance of facility.
• Capable of reading and troubleshooting PLC ladder logic and make simple edits to program.
• Installed programs, or repairs automated machinery and equipment, such as robots or programmable controllers.
• Sets up and operated machine tools, such as lathe, grinder, drill, etc. to fabricate machine parts and repair equipment.
• Operated cutting torch or welding equipment to cut or join parts.
• Fabricated and repairs counters, platforms, working surfaces, partitions and other structures.
• May participate in Cost-down activities.
• Other tasks as required by Management
• Must be reliable in attendance and work successfully in a team environment. Electronic Technician Electrician
Ball Metal Pack-Columbus, OH
August 2019 to February 2021
• Designing, programming and trouble shooting issues with PLC and H Mis. Red lion, Panel View. Allen Bradley, Siemens S7, Tia Portal. SLC, Micrologix, Rslogix 500 and 5000, Guard logics etc.
• Troubleshoot and repair Electrician issues. 24v to 480v and replacement of electrical equipment.
• Programming, trouble shooting and replacement of drives and Servo.
• Robot teaching programming and diagnostic.
Multicraft Maintenance
Graphic Packaging-Marion, OH
March 2015 to March 2019
Multicraft Maintenance.
Plc trouble shooting. Allen Bradley and Siemens s7 Complete electrical and Mechanical overhaul, comprehensive diagnosis and repair of printing press, finishers and formers.
Fanuc robotics repair and and diagnosing issues.
Electrician duties running press and diagnosing electrical issues to repair issues. Repair Plc logic based on new design. Diagnosing and replacing electrical components. Integration Engineer wile attending college full time E.l. Professional-Raymond, OH
August 2013 to January 2015
Responsibilities
Build Templates, measure and execute location fixture for design fit and engineering changes on the 2018 Civic and 2015 Acura NSX.
Using Catia-V5 and Ferro arm to accurately locate fixture data on table fixtures. Machine or weld fixtures and
meet specifications using machines or hand tools. Building and measuring Honda Civic body panels for fitment and alignment according to specification.
Assigned to the Fanuc Robotics cell for weld schedule alignment and Weld location adjustment changes. Accomplishments
Developing the 2015 Acura NSX
Developing the 2018 Honda Civic
Skills Used
Designing fixtures.
Catia V5. Fanuc Robotics. Microsoft office
Private School Maintenance
Administration and Maintenance
October 2005 to May 2014
Completed time constrained projects. Very high standard state funded school. Performed a variety of maintenance; Structural, facility and computer networking. Safety and new policy training. Wired alarm systems
24v D.C. HVAC installation and automation of computers and switching, emergency backup power and lighting.
Installment of machinery; boilers 480v, installed computer systems, including printers. Electrical, plumbing and carpentry performed. Repair vehicles and lawn equipment. Experience administrating Subversion or CVS
source control repositories (Subversion preferred). Experience with component based architectures, object
oriented programming and service oriented architecture along with using Microsoft Office applications. Senior Field Engineer
Sakamuara Machine Company
October 2001 to November 2004
Manufacturing Engineering
JIT manufacturing techniques. Traveled all around America to provide machine solutions to companies in the
Automotive industry. Worked closely with Honda, General Motors and more. Installed new machinery in field.
Stamping department. Automation upgrades and repairs from blue prints and schematics. Qs-9000 control
techniques. Design changes. Continuous automation repair, improvement and engineering. Robotics, pick and place, including the largest cold forging press in America. Electrical, mechanical and pneumatic experience.
Java, SQL, PL/SQL. Microsoft Office applications.
Production Eng Tech
Cardington Yutaka-Cardington, OH
August 1997 to September 2001
Responsibilities
Cardington Yutaka
Tier 1 Honda Supplier. I assisted company to become ISO -9000 qualified. Fast-paced just-in-time manufacturing. Performed mechanical, electrical repairs and engineering improvements. Repaired welding robots, fixtures and die maintenance. Stamping department. Engineered solutions to automation and press applications. Read Electrical and Mechanical schematics and implemented changes. Electrical, mechanical and pneumatic experience repairs and controlling Allen Bradley. Project 8, 87-en server controls. Tig weld and Mig weld proficient. Team Leadership and MRP experience and training of 12-60 associates with quality
circle projects on automated lines, team member safety. Included a project of $50,000 savings. Fixed repaired
Honda engineered equipment. Quality Assurance circle. Accomplishments
Team Leadership and MRP experience and training of 12-60 associates with quality circle projects on automated lines, team member safety.
A project of $50,000 savings for quality circle. Fixed repaired Honda engineered equipment. Created First Quality Assurance circle.
Education
Certification in Fanuc Robotics/ Programming and Tool Handinig Ramtek - Marion, OH
2013 to 2015
Electrical Engineering
Marion Technical College - Marion, OH
2013 to 2015
Certificate in Industrial Maintenance Electricity
Tri-Rivers Career Center
2013 to 2014
Microsoft Systems Engineering. Cisco Routing Switching in Business Management and Computer Science
Marion Tech
2005 to 2006
Industrial, Mechanical and Structural Engineering
Marion Technical College
2002 to 2006
Allen Bradley Plc and controls in Programmable Logic Controllers Ramtek - Marion, OH
Associate's degree
Skills
• PLC
• Facility Maintenance
• Electrical Maintenance
• Maintenance Tech
• Handyman
• Plumbing
• Java
• XML
• Git
• Linux
• JavaScript
• Microsoft SQL Server
• MySQL
• C/C++
• APIs
• User Interface (UI)
• Jira
• REST
• Agile
• SVN
• Unit Testing
• SDLC
• Test Cases
• Oracle
• HTML5
• Visio
• Computer Networking
• Service-Oriented Architecture
• AWS
• Application Development
• Scripting
• Software Development
• Web Services
• Node.js
• OSHA
Certifications and Licenses
Six Sigma Certification
CISSP
Fundamentals of Engineering
CompTIA Security+
Professional Engineer
Journeyman License
CCNA
IAT
CCNP
MCSE
Additional Information
SKILLS SUMMARY
• Management: Meeting with Honda and General Motors to provide solutions to plaguing problems, and
solutions to design issues
• Honda supplier management and training experience
• Supervisory experience, control documentation flow charts, and training
• Complete Microsoft Office experience
• Quality Engineering. Qs-9000 experience. Qs-9000 quality circle
• Microsoft Certified Systems Engineering Education. Active Directory, Linux server farms, file servers, storage
and desktop personal computers
• Understanding of mechanical and electrical automation and dynamics, blueprints
• Troubleshoot and program Yaskawa, Allen Bradley, Mitsubishi, Siemens or Omron PLC's Experience with Servo Motion Controllers
• Robotic setup, overhauling, and programming; Mitsubishi, Motorman, Fanuc
• Electrical applications 24V- 480V. Automation programming Allen Bradley, Siemens Josh Chaney
Contact this candidate