Warehouse Manager Industrial Engineer

Location:

Calexico, CA

Salary:

Posted:

December 17, 2024

Contact this candidate

Resume:

Erik Montero

El Centro, CA

+1-760-***-****

****.*******.******@*****.***

SUMMARY

Bilingual Industrial Engineer with experience in manufacturing projects, software service industry and logistics support services. Knowledge in Lean Manufacturing, Quality Engineering, Statistical Inference, and proficiency with SolidWorks. Practical knowledge in the DMAIC Methodology. Fluent in English and Spanish.

PROFESSIONAL EXPERIENCE

Connest LLC, Chula Vista, CA. September 2023 – August 2024 Warehouse Manager

• Responsible for performing a variety of warehouse duties such as receiving and processing incoming stock and raw materials, picking and filling orders from stock, packing and shipping orders, or managing, organizing and retrieving materials in the warehouse.

• Also be responsible for operating and maintaining warehouse equipment, driving a forklift, keeping records of inventory and stock, and ensuring a clean and safe working environment.

• Act as a point of contact between the factory team, suppliers, and freight transportation companies.

• Worked on the implementation of a new ERP system called Offsight that will be used across all levels of the organization to streamline POs, Work Orders, Inventory Management, Scrap Reports, Transfer Reports, BOMs, Engineering Drawings, Finance, Purchasing, and Production. This work was accomplished by working with the developers of the Offsight software and I was responsible for being the point of contact between the developers and the Inventory team in Tijuana, as well as assisting with the translation of training videos into Spanish to make it easier for staff who needed it. (Connest - Migration & Development Plan).

Acutus Medical, Carlsbad, CA. June 2022 – April 2023 Manufacturing Engineer II

• Overseeing the Catheter Manufacturing line for the AcQCross QX Standalone Devices and AcGuide Flex and AcQGuide Mini-S.

• Lead the Manufacturing Efforts to produce Engineering Builds in the Production Line to evaluate or verify the tensile strength of the AcQGuide Flex, AcQGuide Mini, and the AcQCross Integrated Dilator/Needle products for R&D in accordance with ISO 11070

[2014].

• Worked closely with manufacturing engineering to enhance production processes to achieve quality, throughput, and profitability metrics. Maintain equipment, fixtures, and tooling as necessary in support of production.

• Worked on creating Change Orders, Rework Shop Orders and NCMR's on product and/or manufacturing documents. Maintains accurate records to ensure quality documents are accurate, all parts are traceable, and quality issues can be addressed.

• Support a Rebranding Project by developing the items number, drawings, and bill of materials (BOM) for the new products.

• Using SolidWorks – to create and update drawings on a daily basis.

• An innovated problem-solving approach which assisted in completing the final product design so that a successful product was delivered on time. Providien Medical, San Diego, CA.

Process Engineer I December 2019- May 2022

Tooling Qualification Creation Protocol

• Evaluate effectiveness of the thermoforming process and new tools to produce part number 341879-03, rev R.

• Capability Study of 30 pieces was performed on 6 different lots, on variable IQC points. Where attribute IQC points were assessed 100% for these 30 pieces.

• Additionally, each lot was inspected with an AQL of 0.65% per lot to IQC parameter on drawing.

• Cpk was needed for two IQC points of part number 341979-03, rev R. Cpk acceptance criteria of Cpk >=1.00 for each. Ppk acceptance criteria (if non-normal) of Ppk>=1.00 for each.

Continuous Improvement Project

• Develop Standard Work to facilitate continuous flow and fully utilize staffing by line balancing manual work content.

• 30% increase in process time improvement on top 80% of parts demand.

• Enhance work instructions (visual, easy to follow, up to date).

• Implement COS (Carlisle Operating System) best practices (5s, Optimize cell layout, Move from batching to “One piece flow”, Eliminate waste, Follow Standard work and Sustain) to drive improvements across all Providien Objectives.

• Tracking all SWP’s (Standard Work Procedures) Current, Standard and new cycle times.

• Meeting regularly with local Leadership and Finance.

• Update BOMs (Building of Materials) and drawings. Design of Experiments Improvements

• Run a Design of Experiments (DOE) for Low Thickness found in parts.

• Found the significant factors and the best parameters to run the process.

• 4 Factors were considered for the Design of Experiments, 2 Levels for every Factor and a Full Factorial Design was considered with 3 center points.

• Implementation and monitoring of new process paraments by tracking thickness results on the production cell.

• Using SolidWorks to design die-cut assembly and drawings for cutting process after thermoforming.

Technicolor-Integration Project Mexicali, B.C., Mexico Student (8th Semester) January 2019-June 2019

Improve the Overall Supply Chain Effectiveness of the Technicolor Plant

• Improve Quality in the field by 25%

• On-Time in full for Manufacturing Work Orders = 99%

• On-Time in full for Distribution Orders = 99.8%

• Improve 10% Packaging Line Availability from current state

• Improve employee time saturation at 85% at Receiving, Kitting, Packaging and Quality Assurance.

• Ensure correct use of floor space. 10K SQFT of Production Area can be accommodated to reduce external warehousing in that same amount.

• Reduce 20% the time consumed to receive Raw Materials. This change will allow faster visibility to Production Planning contributing to On-Time in Full metric. Logistic Trade Mexicali, B.C., Mexico

Sales Engineer November 2018-August 2019

Responsible for the entire logistics and material handling processes to provide racks for several warehouses in the industrial sector. As well as prospecting for new clients in the region of Mexicali, Tijuana, Tecate and San Luis, R.C., within the manufacturing industry.

Garret Advancing Motion Mexicali, B.C., Mexico

Previously Honeywell Turbo

Customer Service (Intern) July 2018-Oct 2018

• Maintain communication with customers on a daily basis to expedite the delivery orders to be on time and to update the parts delivered in the SAP system manually. Xquadrone Mexicali, B.C., Mexico

Customer Service (Intern) February 2018-May 2018

• Responsible for developing a short-term project to take the Xquadrone Group to develop the areas of inspection, security, and telecommunications. EDUCATION

• CETYS Universidad, Mexicali, B.C., México

B.S. in Industrial Engineering

• TOEFL 560-out of 677

CERTIFICATES AND TRAINING

• ABET-Accreditation of the Industrial Engineering Program at CETYS University, Mexicali, BC, Mexico.

• Diploma Degree Awarded from the IDE Business Program Tijuana, BC, Mexico.

• Innovation Immersion Workshop by Dr. Dan Shunk – ASU, Tempe, AZ

• Six Sigma Black Belt Certificate at CETYS University.

• APICS CPIM 8 Planning and Inventory Management Training from Glendale Community College.

PROFESSIONAL REFERENCES

Name: Brent Shannon (Director of Engineering)

Company: Providien Medical