Quality Inspector Raw Materials
Resume:
Phoulom Novang
Highly skilled Quality Inspector/QC Auditor with 20+ years of experience seeking a
position in Biotech and Medical Diagnostics industry where I can utilize my many years of knowledge and skills to grow with the company.
San Diego, CA 92114
*********@*****.***
• IHSS CARE GIVERS
Have been working as IHSS Experience
caregiver, for 10 plus years, a mother of 5 kids, have many years of experience taking care of a baby. I would like an opportunity to take care of your child or parents in need of help. Have over 10 plus year in the medical device manufacturing. For the pasted 7 years I have been a team leader training new employees.
Authorized to work in the US for any employer
Work Experience
Quality Technician 2
Becton and Dickenson-San Diego, CA
August 2023 to Present
• C2C SOP Training and Quize
• SAP, Input and Execution all data and materials inspected,
• Keyence Machine, load program and measure parts, collect data and input into SAP for data traceability.
• Operate Smart scope Machine, Measuring parts, Load data into RI USB. Imported to SAP for all data's measurements tractability.
• Collect raw materials from warehouse, get AQL samples and do inspections, some visual information some Dimensional inspection, Record all data into SAP.
• SOP and GMP and 5S
• Pin gauge, drop indicator, blade micrometer, block gauge, Trimos High gauge.
• All raw material is collected as per Traveler call out, all inspections and Data collection is recorded In SAP.
• Collect RI raw materials from warehouse to inspect, look for part numbers and lot numbers.
• Finished goods go into boxes and place a green label for acceptable and Red for rejected
• C2C, SAP for SOP and data entry
Quality Engineering
Tesla-San Diego, CA
May 2023 to June 2023
• Jet Mill powder Particle size Analyzer
• Malvern Masterizer 399 and Aero S powder Feeder
• Operates Automated Inspection Vision system
• Jet Mill powder PSA testing
• Quadro podwer for, Compressiability, Shear and Siever testing, each compound has different formula
• Ect powder for water level and weight
• LIWF powder/Mix powder, Stability, Shear and Sieve Testing, Same powder different formulas Numbers
• CMTSD Pilot / R and D
• PPE: Safety Shoes, Safety Glasses, Nitrile Gloves
• FT4 powder rheomter tester, load program, weight powder for testing, input formula Run test and record data
• CMTSD-Pilot-1009 Anode Metrology
• PAPR Hand on Training
• Machine operated Resch AS200 tap Analytical Sieve shacker, sieve pan, scale, vacuum,
• SOP, GMP, 5’S ( BOM)
• Wieight out Anode powder Analytical testing, record data in master sheet
• Anode film testing, weight, laser cut, Measured with weight scale, test thickness with micrometer, measure the width of the copper cathode.Record data for traceability. Manufacturing Associate I
AjiBio Pharma-San Diego, CA
October 2021 to April 2023
• Rota 180 vial wash, Machine set up
• Download auto program for production run
• pharmaceutical products under cGMP regulations.
• Verify quality of raw materials received and transported it to clean room
• Qualify as production or verifier
• verifying set-up and input receipt numbers for production run, check water temperature, and approve set up before production run
• ROTA150 DMP Media Fill, ISO 6, ISO 5
• Pipette manual filler,operator Syringe for Media fill.
• Fellow SOP, GMP batch record
• Calculating value of fill by weight and value, record data, record Intervention
• Verified Batch record before starting job, record data on database sheet. Have a qualified person sign of job.
• Unpacked vials, load into metal tray, then load into a automatic conveyor belt, into a Rota 180 vial wash machine to get vials washed and sanitize.
• Nestling station, collected clean vials and store in a metal tray
• Clean room gown certified
• Collecting raw materials, Wipes and clean with 70% IPA
• Post- Pre use Filter, WFI flushed and test using Sorter check machine. Record psi and data
• 5S, SOP, GMP
• Scan and verify all raw materials lot and Raw material, transferred to get wipes with 70% ipa before transferring to clean room.
• Change part set up, verify set up program and formula receipt, Get actually count of vials before actual run
• Batch record clearance
• Mono block fill, record all steps n record actually fill runs, working in iso5 and iso6, do weight check and record weight results
• Nestling station, collected clean vials and store in a metal tray, put into autoclave oven to be sensitize. And ready for filled
• Clean room certified
• Collecting raw materials, Wipes and clean with 70% IPA, transfer to production line to be run,
• Empty and rinse used filter and do dialysis or next one
• Clean room manufacturing
• Sanitizing all raw material before it get passed to clean room.
• Optima 7000 fill and syringe fill
Thermoforming Fabrication Assembly
Carlisle Inc
July 2022 to February 2023
• Inspected Raw Material
• Labeling, packaging wrapping. Tapping
• Utilizing screw driver, grander, cutting tools, sand paper. Air hose. Tapping, bubble wrap, foam wrapped
• De burring fabrication parts
• Record data of job being done for traceability
• Meet daily yield
• Fellow work institutions and drawing
• Electrical and Mechanical resting n assembly
Thermoforming Assembly
Providence-Mira Mesa, CA
July 2022 to February 2023
• Thermo Forming Assembly
• De burr Plastic forming parts
• Utilizing, screw driver, power graining tools, de burring knives. Air gun
• Labeling packing
• Building parts, using parts fixture. Glueing parts together, do final De burring, wrap finished products with foam and bubble wrap as inform on work instructions
• Fellow work flow, count and record daily qty assembled and built
• Record daily activity in log book
• Bag, package finished products, labels and set on pallet as finished products, ready to shipped
• IPA 70%, glue, glue gun
• 5 S, GMP, SOP
• Work well as an Individual or team
C3200 CNC Laser Machine Operator 2
Resonetics, LLC-San Diego, CA
December 2016 to October 2022
• C3200 CNC Welder Laser machine operator
• Load software program per production run, verify program energy and record on log book, load internal/ external auto software. Shout down and keep machine on warm up mode.
• Follow Manufacturing procedure step by step for Laser Cutting
• Performs AQL sample lot inspections
• Use Power meter to verify laser energy per set up requirement
• Perform heat treatment and straightening and focus test
• Set up Singular Laser Machine, verifying all collet, vacuum, Argon.
• Perform Focus test, then FA, all passes then production run.
• Perform Geo Measurement, record Measurement data.
• Load software program as specify on traveler. And perform trouble shooting as needed.
• Excel software, MES, Outlook
• Operate sand blaster Machine
• Manually assembled, disassemble heat treated headset.
• Perform new fill and Injection, utilizes tank used to perform new fill, NE, FL, KR
• Change Nitrogen tank as need, sign and date time for reference
• Perform cryo shot down as needed when no production activity
• Perform inspection on first pc approved sign off and log data collected into data sheet for traceability data
• Inspected Package and labels on finished products
• Inspector raw materials, verify lot numbers, job numbers and Quantity being issues match with work order being processed
• Team Lead and training new employee’s
• Perform 100% Inspected on finished laser products, close lot, attached data sheet and Certificate of compliance paper work and send to GDP for final documents review before shipping
• Inspect finished medical device under microscope or magnifying
• Load software to Operate Nikon automatic/Geo manual inspection machine, Record real time datas
• Operates Automated Inspection Vision system
• Record all measurement data on data sheet program for traceability
• Train new employees how to loading software program as specified on production process, support product line with closing, opening new lot.
• Maintain a clean and safe work area, Wipe all area with IPA 70%
• follow instruction of supervisor or manager and conduct our work according to company policy and safety practice
• Use optical inspection equipment magnifier,microscope,caliper, Micrometer. drop indicator for measuring capacity
• Assemble and disassemble medical device-parts, utilizing screw drive, L ranch, Inspected finished products, package and labels, and put in a bin ready to be shipped
• packed and label all rejected parts to identify all defects.
• Self-starter work well as individual or as a team. Work well under pressure.
• Create data sheet, finish labels and c of c paper work.
• Line clearance, 5 S, SOP and GMP.
• Label defects and confirm Quality of rejections.
• Conducted and inspected own and other associate work to insured correction with company and customer drawing.
• Operator baggers machine.
• Conducted finish parts with Go/No go Gauges
• Disposed used Etching chemicals into disposed drum.
• Perform chemical cleaning on part to clean OD/ID on finished parts. Quality Technician III
Dexcom-San Diego, CA
January 2014 to November 2016
• Line clearance, 5s, GMP, SOP
• Inspect sensors 100% using microscope
• Log in MES all inspections data for accept/reject Traceability
• Inspection finished products, packaged and label and sent to shipping.
• Set up printing machine, input customer information date as specify on traveler n print out labels
• Work well as a team or individual.
• QC audit on assembly line, if any issue found write up a complaint, give it to production supervisor for correction, before continuing production run
• Tag and quarantine finish package tag and set aside for MRB to evaluate
• Plastic tube, dental implants, wirings, metals.
Quality Inspector/Inline Inspection
Sergeant Controls Aerospace-Tucson, AZ
September 2008 to November 2011
• Interpret blue print and follow work product inspections.
• Utilize micrometers, calipers, drop indicator and gauges.
• Inspect and perform 100% measurement on finish bulk pack parts as specify.
• Tag and specify all defects for quarantine
• Measured all parts accurate specifications and tolerances.
• Log in all data File Maker Pro.
Quality Inspector
C&D Technology-Tucson, AZ
May 2005 to August 2008
• SMT line inspection, auditor n 1st article verification.
• Work under microscope to inspect small parts, a diodes, transistors and capacitors.
• Perform first article/prototype on first piece, working with engineering and vendors/customer
• Confirm first piece 100% match to Bom with part numbers.
• Read and understand detailed layout of production specifications.
• Verify equipment setup and computer program are in accordance with surface mount technology process sheets.
• Inspect to IPC-A-610 class 2 for components placement, polarity, damage, shift and component alignment.
• Log in all data on SPC, tag and specify defects and sent to rework.
• Packaging and labeling finish products for shipping. Quality Control Inspector
Westmed-Tucson, AZ
July 2005 to December 2005
• Collect shots from press and perform cosmetic and dimension inspection.
• Utilize caliper, pin gauge and ISO gauge go and no for ID and OD tapper.
• Run sampling on Nikon for auto dimensional inspections.
• Inline audit on shot thats coming out of the press Machine, looking for flash, bubble, contamination, crack and dent’s
• Verified labeling for correct vender information as well as part numbers and lot numbers.
• Inspected medical device and commercial products according to AQL standards.
• Verified Start-up, work order change, lay out, rev and raw material used as well as computer program.
• Inspect all dimensions according to bill of material and layout. Final Inspector
MICRO MODE INC-San Diego, CA
July 2001 to October 2004
• Perform final inspection under a microscope on small parts looking for damage and defects.
• Interpreted blue print and detail layout to identify and measure tolerance.
• Utilize a caliper, micrometer, drop indicator, gauges and a +/- electronic pins to measure OD/ID dimension.
• Log in all measure tolerance into File Maker Pro for data traceability
• Sign off worksheets on finished parts and send to shipping.
• Inventory count on all material and record count data. Quality Control/Inline Auditor
Kyocera Wireless Corp/Qualcomm Qpe Inc-San Diego, CA July 1997 to March 2001
• Perform production line auditor for correct work procedure and safety.
• Verify all raw material part numbers and computer program per customer order.
• Conducted quality inspection on fully package cell phone, verifying all accessories and package labeling.
• Perform in-process audit for visual, cosmetic, mechanical, electrical and accessories criteria as per customer.
• Conducted quality inspection on phone memories per customer order utilizing CDMA (code Division Multiple access) on wireless cellules phones.
• Perform inline audit for correct work procedure and work bench safety. If found wrong or unsafe write them up, and inform line supervisor for correction and sign off.
• If found one part wrong inform line operators to stop line and check 20 box. If found more, quarentine all finished packing products for 100% inspection.
• Scan package labels for data record and sign off work sheet.
• Performed Electrical and mechanical testing on all completely cell phones Assembler
H.M.E Electronics-San Diego, CA
June 1993 to June 1997
• Follow detailed layouts and drawings.
• Solder wire connector attachment to microphones.
• Assembly good finished connectors to headset.
• Perform final inspection on complete headsets, performed AC/DC audio testing on incoming and outgoing volume.
• perform rework on defects headsets
• Package and labels finish products.
• Perform electrical testing on wireless headset using AC/DC to test out going and income sounds
• cable assembly, used hand tools, such as screw driver, power torque, heat gun.
• Cut wires, strip and dipped into a hot Solder pot. Chamfer Machine Operator
Alcoa Electronic-San Diego, CA
April 1990 to November 1992
• Operate machines in clean room setting with proper Procedures
• Setup and maintain chamfer machine function.
• Feed and replace materials as needed.
• Perform 100% inline inspection on all boards coming out of machine.
• Check all components of finished parts and tag all defects.
• Work in clean room setting.
• 5s method used daily.
Final Inspector
Hero Technology INC-San Diego, CA
January 1990 to November 1992
• Setup chamfer and tape machines.
• Follow SOP and GMP standards.
• Cut circuit boards into sizes as specified per work order.
• Perform manual tape or feed through machine.
• Perform 100% visual inspection.
• Verify good parts and process for shipment.
• Send defected parts to rework station for Evaluation of issue.
• Operated shrink wrapped machine
Education
High school diploma
Lincoln High School - San Diego, CA
Skills
• Calipers
• Machining
• 5S
• Micrometer
• IPC 610
• Time management
• Quality control
• Sensors
• Quality assurance
• Data entry (10+ years)
• Soldering
• PCB
• CGMP
• Lead manufacturing
• Assembly
• Manufacturing
• English
• Packaging
• Microscopy
• FileMaker
• Dimensional inspection
• Computer operation
• Quality inspection
• Quality audits
• Leadership (4 years)
• Commercial cleaning
• Surface mount technology
• Cleanroom
• Hand tools
• Data collection
• C3200 CNC Laser Machine (7 years)
• IHSS care give, Childcare (10+ years)
• Customer service
• Fabrication
• Mechanical knowledge
• CMMS
• Micrometer
• Assembly
• Communication skills
• 5S
• Manufacturing
• Quality control
• Operating systems
• Databases
Languages
• English and Laos - Fluent
Certifications and Licenses
CPR Certification
Additional Information
In-line inspection, final inspection
Verify raw materials for products run.
Contact this candidate