Sheet Metal Quality Control

Tyreece Buchanan

**** ***** ****** ***** ***** 817-***-**** *****************@*****.***

Objective: Experienced Aircraft Sheet Metal Technician with great Composites experiences. Skilled with a variety of processes to ensure Project Deadlines and Requirements are met through Machine Operating, Mechanical and Electro-Mechanical Assembly, Quality Control, Troubleshooting, Maintenance and Repairs. Looking to apply a combination of all experiences towards a long-term career.

Proficiencies:

• Aircraft Technician

• Sheet Metal & Wire Assembly

• Drilling, Riveting, Boring

• Installations & Maintenance

• Diagnosis & Troubleshooting

• Electro-Mechanical & Mechanical

• Pneumatic & Hydraulic

• Rotary Blades, Vanes, etc.

• Metal Processing, Metal Finishing • Quality Control Inspection

• Mechanical Assembly

• Blueprint Reading GD&T

. Computer programs and system navigation

Education:

AMT (Aviation Institute of Maintenance)

For Airframe & Powerplant (A&P) where I learned

Aircraft Systems: Electrical, Electrical-Mechanical, Hydraulic, Pneumatic, and Mechanical. Powerplant Engines, Reciprocating, Turbine, Fixed Wing, Rotor Wing Aircraft, FAA Regulations

& Aircraft Maintenance Industry Best Practices

Professional Experience:

Lockheed Martin,grapevine, TX September,2017 –jan,2022

Composite Technician

• Responsible for the Installation, Maintenance, Troubleshooting and Repair of various Sheet Metal components / Aircraft parts such as Rotary Blades, Vanes, etc.

• Supported various projects for Blackhawk and Seahawk Helicopters.

• Responsible for Installing Sheath and Heater mats, Glass to Glass, Metal to Metal, Sealants, Rubber Boots, etc.

• Performs Drilling, Riveting, Abrasion Strip Removal, Filler / Injection, Bonding Core, Wet Lay Up Processes, Tip Rib Assembly, Fiberglass / Core Removal, Leak / BIM Components, etc.

• Responsible for Troubleshooting when needed to promote operational efficiency and safety requirements.

• Able to Read and Understand Blueprint Requirements as well as GD&T Requirements.

• Familiar with Tools such as Micrometers, Calipers, Gauges, etc.

. Installation / Structures

Aerospace Commercial Technology,February, 2022 - July,2022

● Supported various Projects for F16 fighter jets,f1 jets

● Performs Drilling, Riveting, Filler / Injection

● Able to Read and Understand Blueprint Requirements as well as GD&T Requirements.

● • Familiar with Tools such as Micrometers, Calipers, Gauges, etc.

● Installation / Structures

Metal to Metal,Sealants, Rubber Boots, etc.

The Davis Companies, december,2022 - january,2024

Job Title - EM Mechanic/ Sheet Metal Mechanic

Company Address: 4700 Marine Creek Parkway Fort Worth TX 76136 Job Description:

Performs a wide variety of complex operations required to build, repair, rework, and align mechanical and electromechanical components, metal parts, sub-assemblies and final assemblies. Works from assembly methods books, sketches blueprints, and verbal and written instructions. Critical tolerance requirements, (such as torque, backlash, tension end play, etc.) must conform to DoD/customer specifications. Performs a variety of operations involving the assembly and/or rework of complex wiring harnesses, sub-assemblies and final assemblies. Typical duties could include, but would not be limited to, those listed below. Responsibilities:

Performs a wide variety of complicated metal and composite material modification and installation operations which include all of the following: filing, drilling, countersinking, fitting, shimming, aligning, adjusting, clamping, bolting, reaming, sealing, riveting and bucking to repair and modify primary sections of vehicle structures. Ability to perform on site fabrication of parts using various power assisted machines. Ability to set up and use all pneumatic squeeze and standard rivet guns, shavers and drill motors.

Use all mechanic’s hand tools and measuring instruments such as: calipers, scales, micrometers.

being familiar with drill taps and various drill sizes. Daily attendance is an essential part of this position. AST Mobile- Midland, TX january,2024 - march,2024

Job title: composite tech/sheet metal tech/ structures tech Job Description:

Performing bench technician mechanical and structural work for satellite systems Duties and Responsibilities:

● Sets up and operate a variety of machine tools and machining centers to make metallic and composite parts to exacting tolerances and dimensions

● Conduct machine set-ups installing and adjusting chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices

● Interpret blueprints, sketches, and engineering specifications

● Verify settings by measuring positions, first-run part, and sample work pieces; adhering to international standards and ensuring compliance to Engineering Drawings and CAD models

● Use a variety of machinist hand tools and precision measuring instruments

● Determine material, parts, and equipment required

● Set up and operate any type of precision machine tool to make original parts, tools, mechanisms, and devices

● Solve problems relative to work-holding arrangement, unusual materials, and tools

● Maintain safe operations by adhering to safety procedures and regulations

● Maintain continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs

● Document actions by completing production work instructions

● Update job knowledge by participating in educational opportunities; reading technical publications.

Spirit aero systems - dallas, TX march,2024-current Job title: composite tech/sheet metal tech/ structures tech Job description:

Lays out, assembles, pre-fits, and bonds a variety of metal, compositor laminate fabrications, assemblies, parts, skins or equipment. Follows engineering and manufacturing specifications and orders to determine parts to be bonded and the temperature and pressure required. Cuts parts or materials to size.

● Operates autoclave, hydraulic presses and ovens to complete the bonding cycle. Sands, burrs and smoothes over areas.Applies sealing resins to cut or exposed edges. Process methods and sequences vary depending on compounds, contours and lay-up transitions. May perform complicated rework or repair. May monitor and verify quality in accordance with controlled procedures.

● Must have the skill and knowledge to perform in all of the general functions of the Assembly Mechanic listed below: Assembly/Installation Structures

Sub Assembly

Work with blueprints, changes, specifications, work orders, etc. to assemble and install to quality requirements parts and assemblies.

Complete required data gathering transactions to facilitate assembly progression.

Setup and perform all manual and automated assembly operations, and portable machine functions required to accomplish assignments.

Perform any and all required pickup, rework, fabrication, change incorporation, functional testing or check during or after final assembly and/or assembly progression.

Move and/or obtain correct parts, materials, tools, assemblies, etc.

Use precision measuring instruments required to accomplish work assignments.

Report and/or investigate job handicaps such as: errors in parts, assembly procedures, tools, sequences, etc.

Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required and complete transactions necessary to move product to the next operation. On an exception basis, move product to the next operation within a building. Sealer

Seal parts, assemblies, and sub-assemblies’ fillet and fay, apply levelling compound or scotch cast etc.

• Pressure / Vacuum Test - Perform visual and auditory leak checks in aircraft assemblies

• Precision Bench Assembly - Assemble precision aircraft parts and assemblies such as wings/slats control linkage etc.

• Sub-Assembly - Assemble parts to make sub-assemblies using templates, jigs, and fixtures

• Assembly / Installation Structures - Assemble structural parts, assemblies, and skins to make larger assemblies

• Assembly / Installation Doors - Pre- assemble, trim, fit, rig, seal, align, and adjust aircraft door assembly.

Apply sealing compounds to seal wing section components.

• Inspection - Inspect and document non-conformances on final assemblies, subassemblies, systems, and installations

Verifies dimensions of parts using both mechanical and electronic measurement tools and, relative to these inspection duties, initiate and document corrective action for programming issues and other problems.

Setup and operate conventional and Computerized Numerical Controlled (CNC) fastening equipment, to assemble components in accordance with engineering specifications.

● Obtain required information from prints, charts, sketches, work orders, documents, verbal and electronic information. Use shop mathematics and precision measuring instruments to complete work assignments. Must verify work performed is per work instruction and meets process and/or engineering specification. Ensure equipment and tool certification occurs per procedure. Use and control of solvents and cleaning solutions in the preparation of details, tools, and assemblies for bonding and paint per established procedures. Perform routine minor machine maintenance as part of their daily work duties.

● Routinely move product within the immediate manufacturing work area, including across-isle, using shop assigned equipment as required and complete transactions necessary to move product to the next operation. On an exception basis, moves product to the next operation within a building. Support the continuous flow of product within the manufacturing process by training and assisting other employees.

● Trains to become MVP qualified. In addition, each employee may be asked, on occasion, to complete other duties and responsibilities as required. Training and certification will be provided for the additional work when required. Physical requirements contained:

● Vision: able to see and read computer screen and other electronic equipment with screens, able to read documents, reports and engineering drawings on a daily basis.

● Hearing: able to hear to participate in conversations in person and via teleconference or phone and to hear sounds on production floor including safety warnings or alarms on a daily basis.

● Speaking: able to speak in conversations and meetings, deliver information and participate in communications on a daily basis.

● Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts on a daily basis.

● Carrying: able to carry documents, tools, drawings, electronic equipment up to 50lbs/14kgs on a daily basis.

● Lifting: able to lift documents, tools, drawings, electronic equipment up to 50lbs/14kgs on a daily basis.

● Pushing / Pulling: able to push and pull small office furniture and some equipment and tools on a daily basis.

● Sitting: able to sit for long periods of time in meetings, working on computer on a daily basis.

● Squatting / Kneeling: able to squat or kneel to retrieve or replace items stored on low shelving.

● Standing: able to stand for discussions in offices or on production floor on a daily basis.

● Travel: able to travel independently and at short notice.

● Walking (include routine walking such as to a shared printer to retrieve documents): able to walk through office and production areas including uneven surfaces on a daily basis.

● Personal Protective Equipment: able to Require PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site.

Contributions to Success:

● Able to Accomplish a 95% on-time delivery for all customer owned repairs.

● Able to Achieve an internal FPY of 95% min.

● Able to Achieve an efficiency rating of 91%.

● Able to Ensure each day that tool box remains complete, neat, clean, audited and organized.

● Able to use Positive communication with all internal/external customers.

● Able to be Hands on within 5 minutes of start time.

● I will Always look to improve quality and efficiency.

● Able to keep Personal work area clean, organized and presentable. Knowledge, Skills, Demonstrated Capabilities:

● I have Exceptional time management skills, ability to multi-task and handle high volume workloads.

● Ability to Correctly understand customer requirements and AHI capabilities.

● I’m very Enthusiastic to support others and achieve the highest level of customer service.

● Communication Skills (Spoken, Written, Influencing, Proficiency in Other Languages):

● Ability to Read, Write, and Understand the English Language. Technical Systems Proficiency:

● Proficiency using Microsoft Office Suite (Excel, Outlook, PowerPoint, and Word) and SAP

Known Responsibilities:

● Technical: Tear down, Clean, Inspect, Repair, Assemble and Closeout Components: 80%

● Tear down, clean, inspect, repair, assemble and closeout components

● Maintaining close working relationships with assigned leads regarding schedules, priorities, and availability of parts, supplies and tools.

● Clear understanding of methods and procedures on incoming inspections.

● Able to effectively utilize all hand tools needed to execute inspection and repairs.

● Skilled on cleaning and stripping when required performing the repairs on blade components.

● Able to prepare and perform repair techniques for return to service of piece parts.

● Capable on assembly of finished product.

● Skilled on closing out all final paper work and quality gates for QA creation of 8130-3.

● Ensuring completion of work complies with customer specifications, FAA regulations, manufacturer's applicable maintenance manuals, blueprints, RDAS, etc.

● Maintaining responsibilities to ensure personal scrap levels are kept at a minimum. Decision Making, Complexity:

● I have the ability to make independent decisions,making it expected when carrying out customer requirements.I Ensure my own roles and responsibilities are clear; take relevant decisions at own level and ownership for their implementation; stick to commitments on time/cost/quality; announces as early as possible if or when commitments cannot be kept; And stop to fix the root causes of issues to ensure they do not reoccur.

● I provide on-going focus on improving processes/products/services; think on how to do it, not why it cannot be done; take initiative to implement good proposals;and measure impact and follow up to ensure improvements are sustained.

Contact this candidate