Electrical Engineer Project Management
Resume:
ROSS STEVEN BELLAMY
SR. MULTI-DISCIPLINED ENGINEER
**** ****** ****, ****** ** 73003
************@*******.***
SUMMARY:
Experienced Multi-Disciplined Engineer: Experience includes the following Engineering Disciplines; Design, Avionics and Electrical Design, Manufacturing, Project Management, Quality, Tooling, Primary and secondary Structures, Composites, Interiors, Avionics & Electrical Systems design and Hydraulic, NC Programming Research, and Development.
CLEARANCE: SECRET
PROGRAM EXPERIENCE:
Boeing’s – AWACS, AEWC, VC-25B, T-7, 787 and C5, Lockheed Martin’s- F-35, Dassault Falcon Jet’s- 7X, 8X, 900LX, 2000LXS, 2000LX, 2000S, Hawker Beechcraft- 4000, 800, Gulfstream’ s - G650, G280, G550, Sema and Hiaper program, Presidential Helicopter, Northrop Grumman E-2, Bell Helicopter, V-22, Sikorski Blackhawk Helicopter.
EDUCATION:
Bachelor of Science in Industrial Engineering Technology and Management
Southern Illinois University College of Engineering 2000 to 2003
Community College of the Air Force 1983 to 1989
Course of Study Included;
Six Sigma
Total Quality Management
Lean Manufacturing
Computer Aided Manufacturing
Industrial Robotics
Manufacturing Processes and Management
EVM
Industrial Safety
Facilities Planning
Cost Estimating
Personnel Supervision and Leadership
Line Balancing
Program and Project Management
Agile
Cameo
Tool & Die, Mold Maker Journeyman 1979 to 1983
MILITARY SERVICE:
Service Country: United States July 1983 to July 1989
Branch: Air Force
Rank: E-4
Security Forces Specialist
WORK EXPERIENCE:
Electrical Design and Analysis Engineer Mar 2019 - Present
Boeing Oklahoma City, OK
Electrical Design and Analysis Engineer
Configuration Management Engineer AWACS
Structural & Payload Design Engineer VC-25B
Avionics & Electrical Engineer Consultant ` Aug 2018 to Mar 2019
Air Methods Englewood, CO.
Avionics Electrical Engineer
Sikorski Blackhawk Helicopter Mod.
Sr. Tooling Engineer and NC Programmer 2017 to Aug 2018
Triumph Aerostructures Tulsa, OK
Sr. Tooling Engineer
NC programmer
Sr. Avionics & Electrical Engineer Consultant
Dassault Falcon Jet Little Rock, AR Aug 2017 to Dec 2017
Sr. Avionics & Electrical Engineer
Electrical Engineer III
Stilwell, OK. And Prior OK Dec 2016 to April 2017
Cherokee Nation Industries
Sr. Electrical Engineer
Senior Engineer June 2014 to Dec 2016
Nordam NTR Division Tulsa, OK
Sr. Engineer for Nacelles and Thrust Reversers
Sr. Quality Engineer
Tooling Manager/Engineer
Helicomb International - Tulsa, OK Aug 2013 to May 2014
Tooling Manager
Tooling Engineer
Quality Engineer - Direct and Manufacturing Engineer Contract
Spirit AeroSystems Corporation - Tulsa, OK Mar 2009 to July 2013
Sr. Program Quality Engineer for Gulfstream’s G650 and G280 Wing.
Manufacturing Engineer
Sr. Avionics & Electrical Engineer
Hawker Beechcraft Corporation - Little Rock, AR Oct 2006 to Mar 2009
Sr. Avionics Electrical Engineer
Sr. Tooling Engineer 4 SME
Vought Aircraft Ind. Inc. - Grand Prairie, TX Oct 2004 to Oct 2006
Tooling Engineer SME
787 and Presidential Helicopter
Lead Manufacturing Engineer- Tool Design Consultant
Lockheed Martin - Greenville, SC June 2004 to Sept 2004
Tooling Engineer
NC programmer
Tooling Engineer Consultant
Helicomb International - Tulsa, OK Feb 2004 to June 2004
F-35 Joint Strike Fighter,
Tool Design,
Composite Tooling.
Avionics & Electrical Design Engineer
Dassault Falcon Jet - Little Rock, AR Jan 1997 to 2003
Avionics Electrical Engineer
Electrical and Wire Design & Installation
Interiors Design
Tooling, Special Projects
NC programmer
TECHNICAL SKILLS:
Management –
Project Management, Supervision, Manufacturing Processes, and Maintenance management, Safety management, Scheduling, Cost Estimating, Capital Expenditures, Production, and Inventory control, Process Improvements, Lean Manufacturing, kaizen techniques. Statistical Process Control (SPC), Quality control, Quality Planning, and Manufacturing Processes
Management; Scheduling, Work center assignment, production, process improvements, trouble shooting and problem solving, first line supervision, line balance, and training.
First Line Management, Production Management, TQM.
SmarTeam, Solumina, SAP, Enovia LCA, Matrix, V6 and PLM, User Support, Trouble Shoot and problem solving, Enovia Administrator User Accounts and permissions Set-up, and Training.
Microsoft Office suite; Word, Excel, Power Point, Project, Outlook, SharePoint, Access. Scaled Agile Practioner, Product Owner, And Scrum Master.
IVT, CMPro, CAM Vis, Earned Value management (Silver), REDARS, QBD’s, Scheduling, CSPR.
Sr. Avionics & Electrical Engineer –
Develops and maintains cable/wire harness detail and assembly designs.
Lead and directed installation teams, test teams, and harness development teams and supported the manufacture, design, testing, and installation of harnesses.
Leads the team to analyze results and performs design reviews.
Provides engineering design disposition on discrepancies (e.g., RCCA, rejection tags, production action requests, and shop revision requests).
Documents processes, specifications and procedures that support the design and manufacture of electrical commodities.
Develops complex statements of work, metrics, schedules and budgets.
Performs technical review of supplier capabilities to facilitate source selection.
Designed and created; Electrical wire harness routing, Electrical schematics, Form board design,
Experienced consists of Catia, V4, V5, V6 electrical workbenches, SolidWorks, Mentor Graphics, AutoCAD, and Capital, EWIS, Electrical Design, Wire Routing, Electrical Schematics, harness design, Avionics systems design, load analysis.
Develop new designs and electrical design concepts. Analyze new designs/concepts and communicate them to the customer and other functional organizations. Provide technical support to the Project Engineer with respect to project deliverables, adherence to schedule and in providing overall project status. Develop and design for electrical power supply requirements at a system level to support.
Train and Teach New Engineers, on Processes, Safety, and Processes related to Electrical, Electronic, Electro-mechanical, and Fiber Optics. Share Knowledge of (EMI) and (EMC) considerations with respect to electrical/electronic design such as wire harness design, grounding and shielding design techniques, lightning protection, separation.
Support design modifications, Engineering Change Orders, general analysis, hardware testing and prototype development. Develops Project Logistics Plans, and supports design reviews and meetings as required.
Electrical load analysis, maintenance instructions, installation instructions, and wiring interface schematics, have experience with analog, and digital systems, ARINC 429, RS232,
Project and or program management certification, or equivalent experience.
Harness Routing Through Out AC, for Nav. Systems, On Board Computer SYS. Entertainment, GPS, Communication, SATCOM, ERU & LRU Systems, Radom Antennas, GOBIZ Antennas.
EVM, CAM-VIS, QBD’s (Silver Medallion)
AI Self Classifying
Sr. Structural Design Engineer-
Catia V5 and V6 (Approx. 40,000+hrs), Part Design, Assembly Design, Electrical wire routing and design, 3D models and 2D layouts, Primary and Secondary Structures design,
Interior Design structures and cabinetry for both commercial, military, and corporate aircraft, Seat layout, Galley’s, Communication systems, Entertainment systems, and onboard Computer systems.
Composite Design, DMU analysis, KBE- (Knowledge Base Engineering), Advanced Kinematics, FEA, FMEA, FT&A, MBD, Solid Modeling, Multi-Axis Machining and Programming, Advanced Machining, Developed Relational Design Standards and Processes, Established and Documented Catia V5 Tooling Standards and Training.
MRB certified for Boeing and Gulfstream programs.
Catia V4.2.2 (Approx. 15,000+hrs), Solid modeling, Wire frame, CWS (Catia Wiring System-E3D), Solid E, Drafting, 3D Solid Modeling, Aux view II, Catia Checker.
SmarTeam, Solumina, SAP, Enovia LCA, Matrix, V6 and PLM, User Support, Trouble Shoot and problem solving, Enovia Administrator User Accounts and permissions Set-up, and Training.
IVT, CMPro, CAM Vis, Earned Value management (Silver), REDARS, QBD’s, Scheduling, CSPR.
Adjunct Professor 2004 - Greenville Technical College Greenville SC - Catia V5.
Sr. Manufacturing Engineer –
Reviewed engineering models and drawings for produce ability and manufacturing.
Developed Planning and maintained manufacturing graphics to current engineering meet customer and FAA requirements using Catia V5, HMS, IHS, Right Hemisphere, Enovia LCA, Solumina and Gplm.
Guided Shipside support, F/A, D/E, MRB, and Stress in critical and technical areas of manufacturing and assembly of complex parts and composites.
Developed ME Processes, Right Hemisphere Processes.
Sr. Tool Design Engineer –
Interiors and Structural, Composites, Tooling, Aircraft assemblies, Jigs, Fixtures, Various types of high precision tooling included: Dies (Stamping, Forming, Progressive, and Extrusion), Gauges, and Plastics Injection Molds, Tool Inspection, Composite Tooling and Layup Tooling Machine design and automation.
Journeyman Tool Maker and Mold Maker, CNC programmer and machinist, Maintenance, Sheet metal Fabrication, Layout and Design, Forming, Aluminum Die Casting, Plastic and Thermoforming.
Standards and Processes, Established and Documented Catia V5 Tooling Standards.
Conceptual Tool Design for the Presidential Helicopter, Falcon 900, 2000, Lockheed F-35, Gulfstream’s 450 and 550, and Boeing’s 787.
Industrialization- Toolmaker built and designed tooling for process improvements plant wide to reduce manufacturing processes and installation of equipment.
Sr. Quality Engineer –
Total Quality Management (TQM), Scheduling, Statistical Process Control (SPC), Quality control, Quality Planning processes, ITAR, Fishbone analysis, 5 Why’s, RCCA.
Work with the Gulfstream in the initiation and closure of root cause and corrective/preventive action plans for CARs and Notice of Escapements.
Experienced with ISO 9001, AS9100, AS9102, TS-16949 and other similar quality systems, standards and procedures including DOD, FAR and FAA requirements for First Article Inspection, in process check and finished goods.
Performed quality assurance periodic and annual auditing. Assisted with Certificate of Compliance and Non-conforming report process.
Develop required Quality Documentation to support continuing conformance to the customer.
Apply engineering and quality procedures to support procured hardware requirements to assure that purchased products and/or services conform to contractual requirements.
OTHER TECHNICAL SKILLS
Electromagnetic bonding, Composite electrical bonding and grounding, Electrical wire and equipment, Electrical engineering, Connectors, Electrical conductivity, Electrostatic bonding Electrical panels, Electrical systems, Wiring design, Electrical bonding
SmarTeam, Solumina, SAP, Enovia LCA, Matrix, V6 and PLM, User Support, Trouble Shoot and problem solving, Enovia Administrator User Accounts and permissions Set-up, and Training.
Microsoft Office suite; Word, Excel, Power Point, Project, Outlook, SharePoint, Access.
PLC programming experience with Alan Bradley, Fanuc, and Siemens
CNC Programmer using, Catia V5, MasterCam, Espri, SurfCam, Solid Edge.
CAD programs; Catia V4, V5, V6, Enovia LCA, Gplm, Pro E, AutoCAD, NX, and SolidWorks, Mentor Graphics, and Capital.
KBE (Knowledge Base Engineering), Visual Basic Applications, SAP, and Teamcenter.
Journeyman Tool and Mold maker.
Operated and programed; Numerous Machining centers, turning centers, plasma cutters, manual machines, welding.
IVT, CMPro, CAM Vis, Earned Value management (Silver), REDARS, QBD’s, Scheduling, CSPR.
Contact this candidate