Project Manager Sacramento Ca

Yanbing Hu

Address: **** ****** *** ********** ** 95828 C: 916-***-**** Email: *********@*****.***

Education:

Bachelor of Science, Electrical Electronic Engineer May 2006

California State University, Sacramento CA

Bachelor of Science, Educational Computer

GuangZhou Educational University, China 1994 – 1997

Professional Experience:

General Manager Suzhou Changfa intelligent automation Suzhou, China 2023 to now

Plan, budget and manage installation teams including all activities and projects.

In Oct 2023, Installed and completed Tesla Model Y gate stopper (Front 000003 and 000004) assembly line in Edscha factory in Mexico.

In Nov 2023, completed galvanizing production line and provided maintenance personnel training in Centric Part in Juarez, Mexico.

In Dec 2023, finished and repaired electrical cabinet rewiring project for automobile rear seat production line, used E-Plan updated drawings for Brose in Queretaro, Mexico.

In Feb 2024, troubleshoot and repaired CNC machines at Plastiexports at Erwin TN.

Lead Project Manager L3Harris Reno, NV Jan 2023 to Oct 2023

Accomplished LMR (land mobile radio) projects with customer NVE (Nevada Energy) for region 0,1 and region 2, found the source of the frequency interference for Sloan substation; mitigated the issue to stop the interference; supporting, coordinating with technicians and director for NVE LMR projects.

Completed planning of the program including extensive use of Microsoft Project Schedule with resource loading and weekly schedule updating.

Action/Issued Log Management including using the Action List to drive weekly meetings with the customer(s)

Full financial responsibility and accountability for meeting baseline targets for Revenue, GM, and Cash Collections

Tracked all requests for change, run requests through the Change Control Board (CCB) and present changes to the customer.

Produced quality reviewed decks to SLT that are timely and accurate, concise and error free. Present information clearly and with confidence.

100% on-time completion of all required compliance training by the dates established.

Weekly and bi-weekly meetings with customers.

Consulted EPC

Telecom Engineer contractor Pacific Gas & Electric Sacramento CA Oct 2022 to Jan 2023

Accomplished SCADA aggregated redundancy server and RTU replacement projects in PG&E, worked closely with project manager, telecom technicians and network engineer.

RTU & SCADA Circuit design

Site visits with T200 and T300 (telecom tech).

PBX and VoIP projects.

Wave SCADA Aggregate Redundancy server

Installed ODN projects.

MPLS Network (Cisco 900 Series devices)

Technical support and worked closely with communication technicians.

Telecom Engineer contractor NV Energy Reno, NV Oct 2020 to Oct 2022

2 year of experience in designing, testing, provisioning, deploying and technical supporting telecom department and projects, accomplished telecom standards for LMR, LMR console and master radio antenna design; completed LMR, LMR console replacement, master radio replacement, fiber installation, circuit design, DPS alarm upgrade Net-Guardian G5 and microwave and MPLS projects.

Microwave radio Design (including Point to point radios, and Multipoint Radio Design)

Sonnet/ T1, Fiber installation Design

Prepare project schedule, weekly, kick off and design review meetings

Prepare requisitions for equipment, SOW, RFP for bidding, contracts and project estimate.

Land Mobile Radio system (Harris EDACS system, that midst upgrading to P25 Phase 2 protocol)

Environmental Alarming (wire up Critical and Major alarms on all telecom equipment)

Green field Communication Site Design (including Tower Design, generator design)

RTU & SCADA Circuit design, Battery Charger design

Attend weekly meetings with other teams and provide project status.

Security systems for Substations Control Enclosures (Cameras, Door striker, access control systems, motion detectors)

MPLS Network (Cisco 900 Series devices)

Use AutoCAD 2019 to design and create and finish construction packages with telecom drafter.

Performed telecom engineering evaluation for system planning and site acquisition

Technical support and work closely with communication technicians.

Equipment and Project Engineer Sunergy California LLC McClellan Park, CA 2019

Worked closely with automation engineers and manufacture engineers, managed maintains team. After worked for three months, Christy was promoted as assistant project engineer/manager.

Reported to the production manager, to cooperate daily maintenance of machines, equipment and electro-mechanical systems to ensure system runs well with accordance with GMP regulations.

Assisted Equipment Manager in creating SOP for equipment, machine and electro-mechanical systems.

Installed and test electric system of equipment.

Created and analyze reports related to the cause of equipment failures or material damage, and identify areas for improvement.

Managed parts inventory

Kept data (history) and track maintenance schedules.

Collected equipment information and confirm the integrity of electric information and file up in time.

Cooperated with internal audit and external audit regulations, ISO Standards, etc. Ensure all machines are running smoothly and are maintained accordingly to the requirements.

Conducted new hire safety trainings

Hold line operators’ job trainings

Provided safety training and kept training records

Repaired machines as needed

Telecommunications Engineer Sacramento Municipal Utility District Sacramento, CA 2010 to 2018

8 year of experience in drafting, designing, testing, provisioning, deploying and technical supporting telecom department and projects, accomplished substation telecom batteries, weather station, fiber installation, PBX, MPLS, SCADA replacement, circuit design, microwave and MPLS projects.

Performed site visits for documentation and cost estimating of existing systems.

Worked on solar, weather station, telecom battery life cycle projects

Provided drawings, designs, contract review and technical support to technicians

Evaluated telecom systems including PBX, VoIP, MPLS, fiber, SONET, SCADA, Cisco switches, Microwave and copper cable

Performed documentation of project work using established guidelines

Learned organizational structure and the specific role and responsibility of their individual organizational unit

Adhered to budgeting and approval processes as part of annual planning and project planning

basic Utilize techniques to perform analysis associated with the resolution of routine technical problems

Design of telecommunications systems for new facilities and enhancements and upgrades of existing facilities and networks

Prepared cost estimates for the routine engineering assignments using established guidelines

RF/Microwave design: simulation and layout, passive circuits

Antenna design: Reflectors, feeds, radomes, simulation and test

Assisted projects of VHF radio Hydromet SCADA network sites

Performed telecom engineering evaluation for system planning and site acquisition

Application Engineer ASCO Power Technology Stockton, CA 2010

Assisted in ordering negotiations by analyzing competitor pricing and technical issues; coordinated with other departments including sales engineers, PCS Engineering and Project Management to insure timely processing of customer orders; provided support for Field Sales Organization concerning technical, marketing, procedural and quotation issue.

Contacted electrical contractors for purchase orders when desirable. Contacts distributor or manufacturer

for purchase order when desirable.

Followed up orders with factory to check deliveries and obtain special information to give quicker customer service.

Confirmed telephone quotations and negotiates sales by telephone or correspondence, using customer’s specifications or proposals to meet customer’s requirements.

Answered technical telephone inquiries from customers. Prepares Technical Sketches to help customers and consulting Engineers understand suggestions/recommendations. Used AutoCAD to create Automate transfer switch drawings.

Screened sales leads received from District Manager, determines necessary follow-up and distributes leads to Field Sales Engineers/Technical Sales Representatives.

Telecommunications Engineer Contractor Pacific Gas & Electric, CA 2008 – 2010

2 year of experience in designing, programming, testing, provisioning, deploying and supporting electronic equipment and associated systems in an engineering environment, skilled in network planning. Strong technical and methodical aptitude with an innate ability to analyze, coordinate and synthesize data

Provided technical/installation support to telecommunication technicians and electricians on the phone.

Used AutoCAD to created construction package, engineer single line sketch and Bill of materials.

Collaborated with participating organizations and contractors to discuss problems and develop resolutions.

Evaluated project impacts on resources, budgets and schedules.

Managed the procurement and installation of communications, and computer systems.

Accomplishments:

Designed and insure modernization efforts for telecommunications systems upgrade supporting customer service centers located in Mariposa and Oakhurst using modern CISCO VOIP technology valued at $350K.

Designed and led modernization efforts on several uninterruptible power systems at remote microwave communication sites, each sited estimated at over $100K.

Designed and oversaw SCADA radio and landline system installations.

Oversaw relocation efforts that affected over 125 personnel in order to facilitate Southern California Call Center expansion overall project for expansion and move was estimated at $1.5 million and came in under budget by $200K.

Ensured completion of drawings; related design documentation.

Project Manager / Technical Support Engineer PACIFIC LIGHTING AND ELECTRICAL Sacramento 2006 to 2007

Prepared bills of material, specification compliances and costs/pricing for assigned projects; prepared proposals for all ballasts products and services; accomplished all UL and CSA requirements for Ballasts reports.

Provided the highest level of Engineer Support to customers.

Worked closely with development and sales engineer and developed hot-fixes for customers.

Reviewed paperwork (proposal, contract, work order, and schedule of shipments, cost and analysis)

Main point person of suppliers for lamp holder buyers.

Reviewed test reports for certification testing and supported the design team with correcting any issues.

Tested Ballast to support manufacturing team. Experienced Ballast and lamp holder troubleshooting.

Provided design consultation to manufacturers in China.

Took products through the UL/CSA certification processes. Used AutoCAD and CorelDRAW to design labels.

An effective team leader. Broad knowledge of UL, CSA Standards.

Work Status: U.S. Citizen

Contact this candidate