Machine Operator Quality Control
Resume:
Ronald Corey Baker
Austin, IN
*********@*****.***
Dependable, fast learning worker with more than five years of experience in the factory and warehouse work environment. Hardworking and attentive to detail with previous positions in quality control. Focused on ensuring products and shipments meet customer’s demands.
Work Experience
Machine Operator. Manpower Scottsburg, IN June 2024-Janury2025
Insure parts were within quality specifications
Trouble shoot issues with machines to fix quickly and correctly
Plan ahead to prevent down time
Make sure products were packed the correct way, and the correct amount
Maintain clean workspace for safety
Keep track of hourly production and down time
Communicate with leadership if there were issues with product or machinery
Keep track of different kinds of defective parts and quantity
Do start of shift check list to insure machine was safe to run and that the correct parts were being ran
Maintain stock needed on line to run production
Machine Operator
Collins Aerospace-Jeffersonville, IN
February 2024 to June 2024
• Read instructions to insure product is made to clients specifications
• Read measurements on the order to check for correct dimensions
• Ensure the correct wood was used
• Trim product using a accurshear machine to correct dimensions
• Look for product in the orders to be be treated and treat them in solution according to specks
• Hang product that has been treated in a drying room, making sure to set the fans and thermostat correctly for the amount of product drying.
• Continue to think of and present ideas on how to improve operations, fix issues,save money and time, cause less damage to the product, improve workflow, increase production, and make consistent guidelines for procedures.
Die Cast Machine Operator
Madison Precision Products-Madison, IN
October 2023 to February 2024
• Ensure all production targets are met on a daily basis
• Countermeasure production deficiencies daily
• Maintain sleeve and furnace sensors
• Clean die faces/remove flash
• Assist with mold Change and repairs
• Change ladle cup
• Change tip lube line/Confirm correct setting
• Perform Quality checks
• Report Quality issues as soon as they are found
• Adhere to all safety polices and wear personal protective equipment
Assembly Technician
Arvin Sango, Inc-Madison, IN
April 2023 to October 2023
• Follow production instructions
• Meet high standards for safety and quality
• Interact with other team members and leads to stay on schedule
• Limit scrap and re-work to better support the business
• Support continuous improvement in manufacturing environment
• Keep production area clean
• Prepare machinery and equipment for use
• Learn and work multiple production lines as needed
• Inspect all parts thoroughly
• Perform other addition task as assigned
• Ability to work in fast paced and hot environment
Assembly Technician and Trainer
Freudenburg Medical-Jeffersonville, IN
October 2022 to April 2023
• Hand assemble manufactured medical components & devices
• Complete required documentation for work performed
• Quality inspect work performed
• Follow defined work procedures
• Provide suggestion and ideas of continuous improvements
• Ability to work in cleanroom environment
• Overtime required to meet customer demands
• Package sealing
• Soldering and assembling parts
• Kept environment cleans
• Train all new and old employees for each area
Set-Up Technician
Precision Strip-Jeffersonville, IN
January 2022 to October 2022
• Tear down heads on slitting machine and rebuild them to specifications required by orders & jobs we are doing
• Cut metal down to the correct size determined by the customers specs
• Assist the operator in anything else needed to keep the machine running with as little downtime between coils as possible
• Build drawers and over arms if needed to keep the strips of coil moving in a straight line moving through the machine and being rewound
• Work as a team with the packaging tech to keep up with the pace of the machine as needed • Process the final product to the customers' needs
Saw Operator
Amatrol -Jeffersonville-IN
July 2021 to December 2021
· Receiving orders for different metals to be cut to certain lengths,
· Identifying the correct material and processing it to the specified dimensions · Safely utilizing tools such as saw, rulers, and tape measure
· Ensuring quality of the finished product using quality control gauges and calipers
Package Handler
McKesson Distribution Center
January 2021 to July 2021
· Performing the physical tasks involved in the shipping, receiving, storing, and distributing medical/ pharmaceutical products.
· Pulling and filling orders.
· Working with RF Scanning equipment to maintain records of merchandise shipped, as well as examining, stocking, and distributing
· Preparing goods for final shipment.
· Maintaining the highest level of productivity and accuracy.
Production Coordinator, Order Picker
Taylor Communications-Jeffersonville, IN
January 2019 to June 2020
· Ensure that product is picked to coordinate best flow of product
· Verify that orders have the correct carrier codes and shipping options
· Run order reports to prioritize orders in system and fix orders that may need attention · Safely operated machinery such as forklift, cherry picker, and swing-reach turret ● Utilized RF gun to load items to be picked
· Verified and picked items out of locations for order
· Met and exceeded hourly rate of picks per hour to maintain production rate
· Used team work and communication skills to meet job deadlines and requirements
Youth Worker
Childplace-Jeffersonville, IN
September 2018 to January 2019
· Applied clinical and behavioral knowledge to maintain safety during crisis moments. · Maintained a calm, positive and encouraging approach with all kids.
· Managed activities that promoted growth in mental, emotional and educational areas. · Worked in a multi-disciplinary environment to provide comprehensive assistance. ●
Communicated with individuals of all ethnic and cultural backgrounds on a daily basis. ● Offered constructive feedback and contributed ideas at weekly staff meetings. ● Intervened in crisis situations to protect residents and others.
· Provided emotional support while with residents to develop long term plans and goals.
CNC Machine Operator
IDX-Jeffersonville, IN
January 2013 to September 2018
· Calibrated machines to keep them running at peak performance.
· Monitored product standards and quality-control programs.
· Responsible for achieving production requirements.
· Monitored machine operation and diagnosed malfunctions.
· Kept work areas clean and neat.
· Fabricated large and small parts per blueprints and assembled parts as required. · Set up and verified the functionality of safety equipment.
· Read and followed standard operating procedures.
· Adjusted alignment of drills, cutters, dies, guides, and holding devices.
· Maintained necessary level of communications between shifts.
Installer
Party Central Rental-Clarksville, IN
November 2011 to January 2013
· Installed tents and event structures according to company procedure.
· Ensured all structures were assembled safely.
· Followed direction of team lead
Construction Worker
K & B Construction-Deputy, IN
March 2008 to November 2011
· Enhanced team efficiency and multitasking abilities by effectively using hand tools, power tools and equipment.
· Applied caulk, sealants and other agents to installed surfaces.
· Followed company procedures to maintain work environment in a neat and orderly condition. · Accurately read, understood, and carried out written instructions.
· Used precision measuring instruments, templates, and fixtures to measure dimensions of finished work pieces.
· Safely operated mowers, snow blowers, chain saws, electric clippers, sod cutters and pruning saws. · Operated wide variety of equipment including power saws, sanders, grinders, cranes drill press, forklift and basic hand tools.
· Followed standards and procedures to maintain safe work environment. ●
Set ladders, scaffolds and hoists in place for taking supplies to roofs. ●
Loaded and unloaded building materials used for construction. ●
Prepared and cleaned construction sites by removing debris. ●
Performed basic machine set up.
· Cleared drains and downspouts and cleaned gutters.
· Manually carried roofing materials up ladders.
Education
GED
DeWitt Community College
2008
Skills
• Production & Fulfillment knowledge
• Interpersonal skills
• Managerial skills
• Good communication skills
• Operating machinery
• Strong initiative
• Extremely quick learner
• Safety and compliance training
• Precision Measuring Instruments
• Calipers
• Caulking
• Micrometer
• Quality Inspection • Order Picker
• CNC
• Forklift
• Blueprint Reading • Order Picking
• Mechanical Knowledge • Shipping & Receiving • RF Scanner
• Drywall
• Lawn Care
• Packaging
• Management
• Leadership
• Production controller • Supervising experience • Manufacturing
Contact this candidate