Qc Inspector Raw Materials

David Martinez

Address:**** ****** **** **** ****

City: Aransas Pass, TX 78336

Email Address: *************.****@*****.***

Cell#: 361-***-****

Summary:

Over 25 years of onshore experience in construction fabrication, petrochemical, welding, fabrication, and inspection. Experienced as a QA/QC Inspector, skilled at quickly interpreting blueprints to assemble structures according to specifications and codes. Skilled Welding operator with multiple processes. FCAW, SMAW, GTAW, GMAW, SAW.

Highlights:

• Knowledge of auditing materials per BOM.

• Monitor the quality aspects of incoming raw materials to the organization.

• Reviewing ITP, WPS, NDE and excellent report writing.

• Knowledge of Weld map, Welder continuity, Weld traceability, etc...

• Detailed -orientated, good problem solver, work well with a team.

• Experienced welding SMAW, SAW, GTAW, GMAW, FCAW on piping and structural steel. In multiple positions.

Employment History:

Levy TX Mill Services 10/08/2022 – Pres.

Company Welder

Duties included welding, reading blueprints, fabricating, repairing machinery and equipment, testing repaired equipment to ensure operating efficiency, erecting equipment, assisting in other duties as assigned, and keeping records and reports writing. Maintaining a flawless safety record.

Dynamic Industries Inc. 09/12/ 2020 – 07/15/2022

QA/QC Insp. Chevron “Big Foot”

Review of specifications, procedures and specified standards being utilized, Inspection, witnessing or verification to establish the quality of a material, and piping system, performing all aspects of inspection activities, Verified that all site activities comply with the quality codes and standards, assist in coordinating Non-destructive testing on site, monitoring welding, fit ups, monitored welding parameters, check dimensions, conduct VT on root and VT on final weld, made sure no arc strikes were outside the pipe bevel. Verify final weld reinforcement and profile. Kept up with welder continuity records and traceability records.

Matrix Services 02/05/2018 - 08/04/2020

QC Inspector

Assigned to Moda Energy facility in Ingleside, TX, and Wildhorse Terminal Cushing.OK

Monitoring fabrication on pump stations. Making sure work is conducted in compliance with DOT along with CFR regulations to B31.4, & API 1104 20th edition code. Verify that correct piping is being used, revising PMI reports, verifying fit-ups, welding, valve installation, gaskets, bolt-up, assisting in NDE coordination, witnessed hydro, coating and holiday testing. Reviewing NDE data prior to hydro.

INCO Industrial Construction 07/03/2017 – 02/02/2018

QC Inspector

Assigned to Nashtech LP in Gregory, TX

Monitoring all phases of fabrication, monitoring welding, fit ups, monitored welding parameters, check dimensions, conduct VT on root and VT on weld reinforcements. Make sure the ISOs is in accordance with latest revision. Witness and verify final welds profile on critical areas. Coordinate NDE personnel, verify all NDE reports were correct per ISO and submit them to NDE personnel. Kept up with welder continuity records and traceability records.

Turner Industries 03/21/2016 – 06/18/2017

Fabrication Shop Supervisor

Coordinated each welder to certain project, monitored the progress of the operations, and ensured the safety of all workers. Inspect the finished product to ensure it is built properly and safely. Participated in conducting Safety Meetings, Time Keeping, assisted in filling out JSA properly.

Mirage Industrial Group 05/10/2014 – 02/02/2016

QC Inspector

Assigned to Buckeye Tank Farm

Monitored fabrication, fit-up, welding per WPS, proper material per BOM material, monitored dimensions, piping alignment per surveyors, witnessed proper coordinates, proper supports were installed. Witnessed hydros. Kept up with welder continuity log, weld percentages.

Bay LTD 04/11/2011 – 03/15/2014

QC Inspector

Monitored fabrication and welding, monitored continuity log, weld log, and traceability, dimensions check. Monitor welders qualifying to correct WPS/PQR. Monitored welding CS, and different alloys such as super duplex SS, 1 Cr, 5Cr., and 9Cr., monitored gasket installation, correct bolts and nuts, and witnessed torque. Helped coordinated NDE personnel. Reviewed final data book for clients

Pickett Systems 07/11/2008 – 03/30/2010

QC Inspector

Monitored measurement equipment and fabrication on Metering Skids fabrication. Weld map, reviewed NDE reports, reviewing all MTRs for incoming structural, piping, and mechanical products to ensure product is in compliance with codes & specifications, witnessed sampling coating & pull tests, witnessed hydro, inspected purchased materials per client’s specifications, reviewed WPS/PQR per project. Reviewed all Final Data Books for client submissions.

Walzel Technical Services / Motiva 04/18/2005 – 07/02/2008

QA/QC Inspector

Monitored fabrication, VTs on root pass, and VT on weld reinforcement per WPS/PQR. Conducted dimensional check, witnessed proper coordinates on piping installation, made sure proper supports were installed. Monitored purge on vessel equipment, witnessed alignment on mechanical equipment, and witnessed correct gaskets being installed, bolt-up and torquing. Helped coordinate NDE accordingly.

CCB Fabricators 04/18/2003 – 03/02/2005

QC Inspector

Assigned to fab shop, duties included weld mapping for Metering Skids, Separator Skids, Header Skids, Well Heads. Working ASME Coded Vessels. Monitored welders using different WPSs’, different welding filler metal depending on material. Witnessed hydros, blasting & coating.

Walzel Technical Services / BP Holstein Project 07/06/2001 – 3/30/2003

QC Inspector

Review & execute ITP to ensure hold points were established, reviewed client specs to assure proper NDE was required. Created NDE log for traceability. Coordinated all contracting NDE personnel to perform RT, UT, MT, PT to insure proper NDE was conducted per specifications. Reviewed and maintained all NDE documents for BP Holstein, and Red Hawk Spar.

H&S Constructors / CITGO Refinery, Corpus Christi, TX 07/15/2000 – 06/25/2001

QC Inspector

Monitored fabrication and welding, monitored continuity log, weld log, and traceability, dimensions check. Monitor welders qualifying to correct WPS/PQR. Monitored welding CS, and different alloys such as super duplex SS, 1 Cr, 5Cr., and 9Cr., weld mapping, monitored welding, witnessed hydros, monitored gasket installation, correct bolts and nuts, and witnessed torque. Helped coordinated NDE personnel. Reviewed final data book for clients.

Walzel Technical Services / Exxon Diana Project 09/03/1998 – 06/04/2000

QC Inspector

Inspected fit-up and field dimensions on Pilings. Monitor welders welding with SMAW, FCAW, GTAW, and SAW. Monitored pre-heat, welding parameter, made sure proper filler metal was used per WPS. Kept up with welder continuity log, welder traceability, helped coordinate NDE personnel. Monitored load out on barge.

Education:

Gregory-Portland High

Baseline Data AWS/CWI Class

Referencies:

Ruben Martinez / CWI Inspector / 361-***-****

Ricardo (Ricky) Martinez CWI Inspector / 361-***-****

Jeff Ross / Matrix Supervisor / 630-***-****

Contact this candidate