Project Manager Pipeline Integrity
Resume:
Kelly B. Harris, III, PMP
Cypress, TX 77429
******@*****.***
Successful pipeline engineer and Project Manager with proven interstate pipeline construction, design and integrity management experience, and a strong focus on safety, budget, and schedule. Extensive experience with FERC regulated projects and associated filings, including extensive experience with 49 CFR Parts 192 and 195 and ASME codes and working with regulatory agencies. Other experience includes utilities, site development, and hydraulic modeling. Seeking a position with a progressive organization where my skills, experience and education will be utilized to their fullest extent.
Education
Louisiana State University –Bachelor of the Sciences in Civil Engineering, May, 1997
Louisiana State University –Bachelor of the Arts. Major – English, May, 1988
Experience
Kinder Morgan – Houston, TX – September 2019 to Present – Pipeline Integrity Project Manager/Engineer
Responsible for managing and providing engineering support for Pipeline Integrity and In-Line inspection projects for the CO2 business unit. Duties include:
Successfully managing CO2 and other Part 195 liquids pipeline rehabilitation programs including pipeline repair, replacement and recoating projects throughout the United States. This includes the completion of several hundred ILI digs and anomaly investigations and ILI tool runs.
Managing and in-house engineering of the successful ILI inspection of over 200 miles of 20” critical phase CO2 pipeline that had not been successfully inspected in the past.
Managing numerous other ILI runs including crack detection, high resolution MFL axial and circumferential tools, and geometric assessment and mapping runs.
Ensuring that Kinder Morgan pipelines meet the regulatory requirements of 49 CFR Part 195 and other state level regulations as well as ensuring that all integrity work is compliant with ASME standards.
Working with Kinder Morgan field offices to ensure compliance with PHMSA and State regulations concerning required inspections, Operator Qualification, Contractor compliance, OSHA compliance and general safety.
Working with PHMSA and state level regulatory officials and auditors to ensure compliance and safe operation of pipeline system.
UniversalPegasus International (UPI) – Houston, TX – January 2019-September 2019 (Contract role)
Responsible for managing all pre-construction and construction activities for a series of CFR 149 Parts 195 and 192 regulated pipelines for a confidential client throughout Southeastern Texas. Activities include developing and maintaining construction budgets, selection and management of construction subcontractors, preparing project and construction execution plans, ensuring that safe work practices are understood and followed during construction activities, coordinating third party pipeline crossings, ensuring all permits are complete and in place, and preparing estimates for future work.
Colonial Pipeline Company – Alpharetta, GA – May 2015 – January, 2019 -Project Manager
Responsible for all phases of the following projects including developing estimates and project budgets, creating Project Management Plans and working with Business Development and Field Operations to ensure successful development and/or execution:
Design and construction of an 8-mile refined products pipeline integrity replacement in the Louisiana marshland, including supervising all Federal and State permitting and environmental remediation.
Design and construction of a new shipper connection into CPL’s Houston, TX origination terminal including connection into both distillate and gasoline headers.
Distillate reliability project design at CPL’s Greensboro, NC station that included installation of a complex bypass around existing can pump and plans for installation of an upgraded pumping system.
Design and construction, with CPL’s business partner Texon, of a Biodiesel injection facility at CPL’s Greensboro, NC station. Now in-service, it is the largest biodiesel injection facility in the United States.
Complete re-design and automation of CPL’s legacy Athens Delivery Facility.
Jacobs Engineering – Houston, TX – December 2014 to April 2015-Project Manager (Contract Role)
Performed front-end engineering design, construction estimate, engineering, compliance specifications, and project schedule for a 100+ mile CO2 Pipeline and Facilities project.
T.D. Williamson Pipeline Services- Covington, LA-July 2012 to November, 2014 – Pipeline Integrity Project Manager
As Pipeline Integrity Project Manager I designed and managed the rehabilitation of Chevron USA’s Chunchula, AL natural gas sales line including several repairs, investigative digs, and full hydrostatic test of line.
Reviewed and updated Chevron’s Land Based Pipeline PHMSA Operations & Maintenance Manual.
Authored Chevron’s Pipeline Maintenance and Integrity Manual which allowed non-regulated pipeline assets to be assessed in a similar fashion to PHMSA regulated pipelines covered under the Pipeline Integrity Management program without the assets falling under regulatory umbrellas.
Performed Complete Risk Assessment of Chevron’s Main Pass (Gulf of Mexico) 10” crude pipeline.
Managed pipeline integrity program for a mid-continent crude producer including scheduling in-line inspections, determining the types of tools to utilize for inspections, preparing post-assessment dig lists, and preparing annual PHMSA reports.
Worked on estimate and design for subsea crude line smart pig launcher and receiver.
Performed 49 CFR Part 195 and Part 192 review of compliance for various Gulf of Mexico crude oil and natural gas pipelines.
Performed PHMSA Jurisdictional and API RP 80 review of Chevron’s on-shore gas gathering systems.
Boardwalk Pipeline Partners, LP-Covington, LA -June 2010 –July 2012 – Senior Engineer/Project Manager
As Senior Engineer, designed, estimated, prepared construction scopes of work and contracts, oversaw competitive bid process, specified and procured materials, oversaw budget, ensured regulatory compliance, managed construction, coordinated commissioning and close out of the following projects:
Relocation and lowering of segment of a major natural gas transmission pipeline in Jackson, MS.
In-Line Inspection Tool (pigging) modification to approximate 20 miles of existing pipeline.
Replacement of a segment of above pipeline under a major highway by directional drill.
In-line Inspection Tool modifications to and hydrostatic test of an existing 20” transmission pipeline.
Construction of pipeline replacement/reroute project through a dense urban area of Jackson, MS including approximately 4.3 miles of high density directional drill including a single bore of 9,222 FT.
Designed, prepared contract documents, bid, and worked with land owners and LA DOTD to obtained required right of way, temporary work space and permits for replacement of a pipeline crossing of a major highway and modifications to the measurement and regulation station at the terminus of the line.
Managed engineering team responsible for Pipeline Integrity Management projects to ensure compliance with 49 CFR Part 192 Subpart O requirements.
Prepared annual PHMSA reports as part of the pipeline integrity Team.
Dominion Transmission, Inc. – Richmond, Virginia and Clarksburg, West Virginia - November 2005 – June 2010-Project Manager
Created and maintain hydraulic models of the natural gas gathering and transmission system using Stoner SynerGEE software and other design tools.
Analyzed gathering and transmission system operational data to isolate problem areas in the pipeline systems and determine system improvement solutions.
Designed, prepared construction contracts, oversaw competitive bid process, specified and procured materials, managed construction, oversaw budget, insured regulatory compliance, and coordinated commissioning and close-out of the following projects:
1. High consequence area pipeline replacement of approximately 5 miles of 16” and 20” pipeline in West Virginia
2. High consequence area and identified site pipeline replace of approximately 5 miles of 20” pipeline in Pennsylvania
3. Modifications to existing compressor station facility to allow the transfer of 300 million standard cubic feet of gas per day.
Designed new natural gas metering and pressure regulation stations, including a 13 million standard cubic feet per day facility for Cornell University.
Designed pipeline lateral to transport natural gas from transmission line to Cornell University custody transfer point.
Coordinated and managed the design for installation of a refurbished 2,500 horse power compressor engine in the existing Utica, NY compressor station.
Coordinated the Third Party Tap program for natural gas producers injecting into Dominion’s transmission pipelines. This included design and construction management for tap installation, working with producers to insure that facilities met Dominion specifications, working with fabricators and contractors on construction and installation of said facilities, and coordinating commission of said facilities with various Dominion departments.
Worked with Pipeline Integrity and Assessment team on completing DOT/PHMSA annual integrity compliance reports.
Sunoco Logistics, L.P. –Sinking Spring, PA-January 2005 – November 2005 Filed Engineer (Contract Role)
Designed access driveway for pipeline headquarters.
Designed drainage improvements for pipeline facilities.
Managed pipeline coating program.
Managed right-of-way clearing program.
Managed budget for pipeline maintenance program.
Performed liquid pipeline flow calculations.
Designed flow improvements for petroleum product metering stations.
Prepared company for federal DOT Office of Pipeline Safety audits (CFR 49 PART 195).
Chesapeake Utilities Corporation-Dover, DE-February 2003 to October 2004-Facilites Engineer (Contract Role)
Designed pipeline facilities for expansion projects in Pennsylvania and Delaware – included foundation and hydraulic modeling, soil stabilization, site development, drainage, and erosion control plans.
Managed geotechnical investigation for above projects.
Designed metering stations including all civil (site, drainage and foundation) and mechanical work.
Managed pipeline relocation, rehabilitation and maintenance projects.
Prepared Federal Energy Regulatory Commission (FERC) filings, including Applications for Public Necessity and Convenience and Environmental Assessment Reports.
Prepared contract, specification and bid documents for pipeline projects.
Authored initial Pipeline Integrity Management Plan that ensured full compliance with CFR 49 Part 192 Subpart O requirements.
•Worked with various state and local jurisdictions on acquiring permits for construction of new projects and ongoing operations issues.
•Revised and updated Operations and Maintenance Manual.
•Created Construction Standards Manual.
•Worked as team member for Natural Gas Pipeline Operator Qualification Program.
•Worked with various state and local jurisdictions on acquiring permits for construction of new projects and ongoing operations.
Williams Gas Pipeline-Houston, TX - October 2001 - January 2003 - Plant and Pipeline Design Engineer
•Designed civil and pipeline facilities for natural gas transmission metering stations, including site grading, drainage, building and pipeline structural foundations (deep pile and shallow footing), soil erosion control and stabilization measures
•Managed geotechnical investigation of proposed project sites.
•Worked with various state and local jurisdictions on acquiring permits for construction and ongoing operations, including DOT highway occupancy and access and DEQ permits
•Supervised and managed the work of outside consulting firms to insure that it met Williams’ specifications, including the 2002-2003 Kern River Pipeline expansion.
•Performed structural analysis of existing compression station buildings.
•Prepared specifications for prefabricated meter and odorant buildings for natural gas metering stations
•Conducted onsite inspections of meter and compressor station construction projects
•Performed structural analysis of existing compression station buildings.
AGL Resources-Atlanta, GA- August 1999 - October 2001 – Regional Engineer
Designed natural gas metering, pressure regulating and distribution systems including all bare steel/cast iron pipe replacements and all new business installations for the Macon, Marietta, Conyers and Valdosta, GA systems.
Prepared AutoCAD drawings of proposed gas metering sets.
Prepared cost estimates for proposed construction projects.
Prepared bid packages for proposed pipeline projects.
Reviewed and inspected existing facilities to insure that they met or exceeded regulatory standards (CFR 49 Part 192).
Performed comprehensive engineering audits of service centers and liquefied natural gas (LNG) plants, assuring that all legal and regulatory issues concerning natural gas distribution and LNG operations were met.
Researched new natural gas related technology.
Assisted Atlanta Gas Light service centers in meeting customer needs.
LOUISIANA DEPARTMENT OF TRANSPORTATION AND DEVELOPMENT - Baton Rouge, LA- May 1997 - August 1999-Project Development Engineer
•Assisted ports and small municipalities with the design and development of infrastructure improvement and drainage projects.
•Reviewed plans and specifications for the Port Construction and Development Program and Statewide Flood Control Program.
•Reviewed and processed requests for partial payments and change orders on projects
•Inspected substantially completed projects for departmental acceptance.
•Assisted ports with monitoring completed projects, project construction management, and inspection, including some surveying.
•Designed and implemented a program for tracking cash flow on port construction projects funded in part by the Department.
•Worked with Contractors on construction of State highway and access road projects.
• Conducted materials and soils testing.
•Reviewed plans and specifications for highway construction projects
•Prepared plan changes and construction estimates.
•Supervised construction inspectors.
•Conducted project site and construction surveying.
•Performed project layout and staking, elevation and slope determination, and final acceptance surveying.
LOUISIANA DEPARTMENT OF TRANSPORTATION AND DEVELOPMENT - Baton Rouge, LA- February 1996 - May 1997 –Engineering Intern
•Maintained statewide database of registered water wells.
•Reviewed plans for proposed water wells for compliance to Louisiana environmental regulations.
•Conducted field inspection of wells and well drilling.
CERTIFICATIONS
Project Management Professional (PMP) – Project Management Institute - 2017
SKILLS
STAAD Structural Engineering software Intermediate
Spreadsheet Applications Advanced
Pipe Phase Modeling Software Advanced
ADDITIONAL TRAINING
NACE (National Association of Corrosion Engineers) course – “Designing for Corrosion Control” – 2013
RMC Project Management curse – “Project Management Tricks of The Trade”- 2011
Appalachian Underground Corrosion Short Course – Advanced Certification - 2005
References available upon request.
Contact this candidate