Mechanical Engineering Heavy Equipment

#** ********* *** ****** ****

New Grant, Princes Town

Monday,02th December, 2024

Dear Sir/Madam,

I have much pleasure in applying within your company for the position of Mechanical Technician or any position befitting my qualifications. I completed a rig technician’s diploma at the national energy skills centre, Drilling Academy. I also completed a Mechanical Engineering Technician Diploma, at the University of Trinidad and Tobago.

My previous work experiences incorporate Offshore Deepwater Drilling operations, production and completions offshore also workover and production operations onshore, Heavy Equipment Mechanic, Land Surveying, auto mechanics,recprocating pumps and air compressors mechanic, building construction, domestic electrical installation, working in the field as an Electrical Technician and also installing Closed Circuit Television system (CCTV) cameras. It is my wish to continue my career with your company. I hope you may award me this opportunity. Should my application meet with success I shall be happy to attend for an interview at your convenience.

Attached please find Curriculum vitae. Please also acknowledge receiving of this mail.

Yours Respectfully

Rudnath Deonarine

PERSONAL INFORMATION

Address : #31 Frederick 3rd

Branch Rd, New Grant,

Princes Town.

Telephone Contact Numbers : Cell; 376 9237

: Home; 754-2344

E-Mail Address : *********@*******.***

: ********@*****.***

ACADEMIC CERTIFICATION

The University of The West Indies Open Campus

Electrical Installation (Domestic) ( 2017)

National Energy Skill Centre (NESC) Drilling academy

Rig Technician Diploma June,02nd, 2014 – July 15th,2016

The University of The West Indies Open Campus

Certificate in Electronics level I & II ( 2014 - 2015)

The University of Trinidad and Tobago, San Fernando Technical Institute

National Engineering Technical Diploma in Mechanical Engineering (NETD)

September 2010 – May, 2013.

Princes Town Senior Comprehensive School

O’ Level CXC (2007- 2009)

SKILLS HIGHLIGHTS

●Heavy equipment mechanic e.g. Excavators, bulldozers, compactors,

●Rigging, Slinging and banksman

●Knowledge and experience in winching large loads for rig applications.

●Knowledge of pole trailer capacity and operation while binding loads eg: casing, drill pipe, tubing, sand pump bailer, Sucker rods, Sand screens.

●Experience in production, completion and workover rig operations.

●Experience in Land Drilling rig operations

●Excellent planning and coordinating skills

●Excellent written and oral skills

●Ability to work well in a high-pressure environment

●Ability to communicate clearly and follow instructions

●Experience and knowledge in deepwater drilling operations .

PROFESSIONAL EXPERIENCE

Employer: Trinidad Offshore Fabricators Company (TOFCO)

Position: Mechanic A (October 2024 -- present )

Identify and trouble shoot mechanical issues with Manitowoc,Terex and Crove cranes and rectify the same

Trouble shoot and repair Kalmar 16 t18T and 20T folklift,hyster 22T, airman and sullair Air compressors,lighting towers, Diesel welding Plans.

Erect and dismantle booms sections and weave drilling line on Terex 475T,275T and manitowoc cranes as per manufacture specifications

Employer: Unicomer Distribution Centre

Position : Warehouse Attendant

(May 2024 – August 2024 )

Locate items identified to be picked

Offload / load containers with items as per instructions

Maintain good housekeeping as per company policy

Employer: JSL International

Position :Pumphand / Derrickhand

Deepwater Semisubmersible Development Driller III (April 2022 – April 2024 )

Assist the Driller and Assistant Driller with rig floor operations; work with the Floorhand on the rig floor when applicable.

Participate in pre-tour meeting with the drilling crew for all drilling operations.

Inspect and perform routine checks on the Mud Pumps and connected equipment.

Assist in mixing spacers and cementing casing.

Monitor the mud pumps and mud pits during operations; Report any unexplained pit level increase/decrease to the Driller.

Check and record drilling fluid weight and viscosity at regular intervals and report any deviation from operational requirements to the Driller.

Maintain daily logs of drilling fluid properties as well as chemicals and mud materials; Assist in completing the mud record section of the IADC report on a daily basis.

Operate all drilling fluid handling and treatment equipment in the pump/pit room in accordance with operational requirements; Mix and treat drilling fluid as per Mud Engineer’s instruction.

Maintain and repair mud pumps and associated equipment; ensure that permit to work and isolation procedure is followed.

Achieve competency to operate forklift, gantry crane and/or manual dolly to transport sacks of dry chemical additives as required to maintain correct drilling fluid properties.

Operate, maintain and replace faulty gate valves associated with the mud system, butterfly valves in mud pits, pump room shale shakers, etc.

Operate, maintain and repair mud conditioning and solids control equipment as required.

Assist in the running and retrieval of Blow Out Preventer (BOP) and auxiliary operations.

Assist with deck operations when required.

Incorporate the THINK planning into all tasks, whether working alone or as part of a team.

Participate in the START process.

Ensure that DROPS inspections are conducted as per the rig’s DROPS inspection program.

Call a Time Out for Safety (TOFS) whenever an unplanned hazard or a change in the expected results is observed.

Maintain the pump/pit room in a clean, organized and hazard-free condition.

Ensure that all Company policies and procedures are adhered to while carrying out assigned duties.

Report any incidents, potential hazards or abnormal situations to the Driller or Assistant Driller.

Employer : JSL International

Position : Floorhand

Deepwater Semisubmersible Development Driller III (April 2020 – April 2022)

Role and responsibility :

Making up drill pipe & casing with iron roughneck to conduct drilling operations

Conduct day to day inspection of drilling tools such as drilling slips,iron roughneck.

Perform maintenance on derrick sheaves fingerboard latches and conduct visual checks as required.

Maintain and monitor shale shakers while drilling ahead.

Monitor drilling parameters at flowlines and shaker house while drilling

Employer : Trinidad Inspection Services Limited

Position : Mechanical Technician (April,2019- April, 2020 )

Role and responsibility :

Conduct daily mechanical activity for day as outlined by program.

Procure parts and services from respected vendors

Conduct visual Inspection on task to assign proper maintenance method

Review operators complains and conduct follow up operations

Provide requisitions to purchasing department to facilitate procurement of labour and replacement of worn parts where internal or external services are required.

Maintain equipment’s history by recording all inspections,services, and repairs on TISL defined Asset Management System

Review all repairs done internally and externally and update TISL Asset Management System

Inspect all new parts purchased to verify accuracy with what was ordered

Identify mechanical faults in company equipment’s such as reciprocating air compressors,industrial 220kva generators,pumps, welding units and also troubleshooting problem as necessary.

Employer : Sadhna Petroleum Services Contractor Limited

Position :Floorman /Derrickhand (Production and Completion rig) (August,2018 – April,2019)

Roles and Responsibility:

Ensure parameters are in place for Mobilization of rig

Provide operators with information prior to offloading equipment’s

Inspection of all tools and equipment

Bleed off well pressure before nippling up safety equiptments

Removal of horse head pumping jack

Assist other floormen to pull out sucker rod string

Assist crew in unflanging wellhead and nippling up BOP

Assisting crew to pull out Tubing string

Conduct Well intervention as programmed eg. Sand bailing, washing

Running Tubing in/ out hole

Removing BOP and install flange on wellhead

Running sucker rods and pump in hole as outlined in program

Installation of horse head and pumping jack

Rigging down,Housekeeping,packing of materials for transport

Employer : Sadhna Petroleum Services Contractor Limited

Position :Floorman (Drilling rig) (January,2018 – January,2019)

Roles and Responsibility:

●Operates drill pipe slips and iron roughneck when tripping in / out of hole.

●Maintaining drilling equipment eg. Lubrication of topdrive,swivel,tongs and slips.

●Participate in running casing after the well has been drilled.

●Maintaining shale shaker and keep inlet and out let free of cuttings also monitor cuttings parameters while drilling ahead.

●Conduct piloting operations of equipment’s during rig moves.

●Perform rigging up/ rigging down operation’s.

● Carry out general house keeping operations as needed

Employer : General Earth Movers Limited

Position : Heavy Equipment Mechanic June, 2017 - January, 2018

Roles and responsibility:

●Conducted daily pre-job meetings and safety briefing on tasks duties to undertake.

●Identify and troubleshoot mechanical faults in equipment such as engine knocks, Fan belt noises, gear noises, engine oil, hydraulic oil filters oils replacement base on equipment working hours data,coolant, and fuel leaks identification and solution base on company standard operating procedures.

●Assisted in numerous caterpillar inline 6-cylinder engines rebuild.

●Assisted in caterpillar D6R, D6T,D8R, D8T,tractor grouser plate and track removal and installation

●Work on caterpillar, 303,320DL&CL,330Cl,Hitachi Zaxis 200 Excavators

Employer : Reevas Transport Solutions Limited (RTSL)

: Rig Tech Services Limited

: Lease operators Limited

: Touchstone Exploration Limited

Position: Roustabout (September,2016 – June,2017)

Floorman on a workover and completions land rig

Role and Responsibility:

●Rigging, slinging and banksman

●Roustabout preparing tubulars for land drilling operations.

●Pumping jack repairs, installation and removal.

●Production workover Rig move operations.

●Production rig workover (Running 2 3\8 ``to 2 7/8``tubing 5/8``,3/4``,and 7/8`` sucker rods for workover

●Worked alongside repair crew to put well on production nipple up polish rod and stuffing box and flow lines.

●Assisted in washing and respacing a well TVD(1800 ft-3000ft).

Employer: Real Time Surveys

Position: Surveying Technician (September 2015-September 2016)

Employer: Kenmos Electrical sales and services

Position: Electrical Technician (2010- 2012)

Role and Responsibilities:

●Install electrical conduit for electrical cables

●Run electrical cables for both lighting and plugging circuits

●Saddle electrical ECC cables as requires

●Install plugging, lighting and switches as necessary

Princes Town Senior Comprehensive School

O’LEVEL C.X.C

COURSES STATUS YEAR

OBTAINED

Mathematics Pass June 2009

English A Pass June 2009

Mechanical Engineering Pass June 2009

Technical Drawing Pass June 2009

Social Studies Pass June 2009

Physics Pass June 2009

Geography Pass June 2009

PERSONAL ACHIEVEMENT:

Certificate of completion;

●IADC Rig Pass

●Confine Space Entry

●TBOISET

●BP Golden Rules of Safety & Environmental Management Systems

●Rigging and Heavy Lifting

●Crane Maintenance

●Hydraulic and Pneumatics

●Banksman slinging level I & II & III(API RP 2D) &(Loler)

● Well Control (Floorman, Pumphand,Derrickhand)

●TCL cementing for drilling operations

●Mechanical Engineering Technicians Diploma (UTT)

●Rig technician Diploma (NESC)

●Point lisas energy association pass (PLEA)

●Installation Electrical Installation(Domestic)Electronics I & II (UWI)

●Advance Firefighting

●UKOOA Medical

REFERENCES:

●Mr. Patrick Ramkisson, Program

Leader of Mechanical

Engineering Department the

University of

Trinidad and Tobago (SFTI)

campus

Phone (1868) 498- 1552

●Mr. Kevin Durham

Drilling Academy Manager

Phone; 1-868-***-****

●Mr. Owen Baboolal

Rig Manager

Sadhna Petroleum services

contractor limited

Phone 868-***-****

Mr .Kistappa Deonarine

Offshore Manager

Shell Pointsetter platform

Phone 868-***-****

Office 868-***-****

Contact this candidate