Maintenance Technician Preventive
Resume:
Clayton Waters
Bench, Maintenance, Repair, Preventive Maintenance, Electro- Mechanical, Technician
Newark, NJ 07103 **********@*****.***
My goal is to secure a position with opportunities for professional growth where I can contribute my skills and abilities.
I Have over 35 years of experience in mechanical, electronics and computer technology.
Work Experience
Maintenance Technician Temporary Position
Occupancy Heroes Incorporated - West Orange, NJ August 2023 to November 2023
Establish good business relationships with contractors utilizing management software.
Complete service requests (Work Orders) In a timely fashion plumbing leaks, installs and replaces sinks, faucets, and toilet components, troubleshoots and replaces basic electrical components
Estimate time and extent of repairs.
Making apartments ready for occupancy carpentry work, drywall repairs and finish work.
Touch up painting, repair and replacement of window screens and glass.
Appliance, electrical, heating, plumbing and safety equipment repair and replacement.
Preventive maintenance; assisting with inspection of apartments.
Replacement of window screens and glass.
Pick up / clean grounds and common areas. Keep the ground clean and presentable.
Have HVAC experience but not certified.
Kw Builders · Freelance Kw Builders · Freelance Nov 2022 - May 2023
Facilities Assistant Facilities Assistant
Installing wiring and electrical components, switches, outlets and lights Junction Boxes both Commercial & Residential. Maintaining electrical systems. Inspecting electrical systems to be sure they work, are safe and are up to code under a License Electrician: Diagnosing and fixing problems in wiring or electrical components within building structure.
Maintenance Technician II/C&W Services Contractor at Amazon
Amazon Fulfillment Center EWR9 - Carteret, NJ September 2019 to October 2022
Maintained a good working relationship across all the board within the organization Maintained and troubleshot automated, electrical, and mechanical systems.
Maintained a good working relationship across all the Board.
Experienced with Industrial electrical, and Industrial motor controllers.
Limit switches, proximity sensors, timers, solenoids, Servo drives, frequency inverters, linear drives, tach, and encoders.
Aided other mechanics on diverse types of equipment. Experienced withSL2 Sorter, and SC3 Dematic Cross belt sorter.
Robotics complete both basic and advanced preventative maintenance routines, documentation, and procedures. basic trouble shooting of robotic drive units and software.
Daily, schedules, assigned work orders and ensure PM 100% efficiency.
Aid other techs diagnosing, trouble shooting and repair on conveyor equipment when a malfunction has been detected.
Resolving problems fast to minimize down time with no or minimum supervision.
Robotics Responsibilities included:
Responding to robotic system break downs
Complete both basic and advanced preventative maintenance routines, documentation, and procedures
Basic trouble shooting of robotic drive units and software.
Logging detailed maintenance data
Maintaining and repairing distribution center mobile racking
Assisting, repairing, and keeping material handling equipment
Tracking and storing the department's inventory, including spare parts
Supporting continuous improvement in department.
Preventative Maintenance Technician
Zimmer Biomet - Parsippany, NJ June 2018 to February 2019
Zimmer Biomet Trabecular Metal Technology, Inc. (TMT) designs, manufactures, and distributes through other Zimmer Biomet business units orthopedic reconstructive, spinal, dental and trauma devices. These orthopedic devices include hip, knee, and extremity reconstructive devices, cervical and lumbar spinal devices, dental, bone void filling trauma devices under FDA standards.
It is the policy of Zimmer TMT (Trabecular Metal Technology) to require the use of personal protective equipment (PPE) Personal Protective Equipment to protect workers from hazards in the work environment that cannot feasibly be controlled by engineering or administrative controls.
As a Preventive Maintenance Technician, we as a team performed Monthly, Weekly, Daily PM’s also we had.
PM’s daily, work invoices done Monday – Friday the following: reclaim tanks, gaskets, reactors, traps, dust collectors, gauges, Tuthill vacuum boosters, mass flow controllers, pneumatic actuators, 6-inch Hayward Butterfly and Banjo ball valves, Iwaki magnetic drive pump, Hayward pneumatic actuator model C35- SR-2CR1IMP, Hayward electric actuator model EPM8-120P.
Performing Current Good Manufacturing Practice (CGMP) regulations FDA standards.
J-Press systems ran off: Hydrogen, Chlorine Argon gas, Argon, refrigerated liquid, Nitrogen, Breathing Air. Worked with SAP systems, CVD systems, pH balances have been stabilized between7.0pH and 11.0pH. When the pH has stabilized in the reclaim tanks “OK TO DRAIN” light will illuminate and send to city sewer.
Depot Repair: Electronics Technician II
FUJIFILM USA /CONTRACTOR - Edison, NJ
April 2007 to November 2017 FUJIFILM USA /CONTRACTOR,
Edison, New Jersey,
United States
Depot Repair: Electronics
Technician,
Troubleshoot to find the reasons for poor print quality,
Which is often caused by defective or dirty parts, such as rollers and thermal print heads, and they may repair or replace printheads.
Which wear out from overuse or mass printing. I use a variety of tools, including multimeters, jigs, pliers, and screwdrivers.
CES CUSTOMER SERVICE ENGINEERING,
Edison, New Jersey,
United States Electronics Technician,
April 2007
November 2017
Performed initial system diagnostics, repair/replace failing components update machines to the latest firmware level specifications.
Fuji Film (USB) devices dry lab printers Ask series: 2000, 2500, 4000, Film scanner series Sp 500 Responsible for supporting customers equipment.
Hallmark: MARK 7L (electro-mechanical) Silver Recovery System commercial recycling service designed for treating Fixer from
HOSOKAWA MICRON SYSTEMS,
Summit, New Jersey,
United States
Plant Chemical Operator, December 2004
April 2007
Cleaned and set up equipment for each job order.
Monitored production, sampled product using sieves, reviewed data, and adjusted process as needed. Performed preventive maintenance on production equipment.
Mixed, loaded, and milled batches per spec sheet.
Performing Current Good Manufacturing Practice (CGMP) regulations FDA standards.
COASTAL SYSTEMS INC,
Cranbury, New Jersey, United States
Field Service Technician Senior /Field & In-house, October 2002
November 2004
Troubleshoot to find the reasons for poor copy quality, which is often caused by defective or dirty parts, such as lamps, mirrors and lenses.
Perform preventive maintenance which helps control downtime on equipment and more effective production on customers sites.
Repair defective or dirty print production equipment.
FUJI COLOR PLANT,
Hackensack, New Jersey, United States
Electro-Mechanic II, May 2001
August 2002
Understanding the implications of latest information for both current and future problem-solving and decision-making.
Make repairs such as replacement of defective circuit boards, sensors, controllers, encoders, and install electrical or electronic parts and hardware in housings or assemblies.
Performed maintenance on plant equipment which consists of preventive maintenance to create a more effective production in a manufacturing environment.
KONICA MINOLTA BUSINESS SOLUTIONS U.S.A., INC.,
Edison, New Jersey,
United States
Field Service Technician III., July 1995
April 2001
Managed accounts and worked with over 450 customers with servicing equipment in the tri -state area contracts.
Inspected machines, performed diagnostic tests, and made necessary repairs, preventive maintenance Interfaced with customers in the field supporting problem equipment on a daily basic's faxes, scanners, card readers, and analog & digital duplicating equipment.
XEROX,
Mountainside, New Jersey, United States
Field Service Technician III, June 1987
May 1995
Reassemble machines after making repairs or replacing parts. Maintain records of equipment maintenance work or repairs.
Diagnostic-test components or circuits of faulty equipment to find defects, voltmeters, or special diagnostic software programs.
Travel to customers' accounts to service machines or to provide emergency repair service converse with customers to decide details of equipment problems.
Education
Certificate in Electronics & Computer Technology
Lincoln Tech - Edison, NJ 1993 to 1995
Certificate, Apprenticeship in Graphic Arts
Union County Vocational Tech - Scotch Plains, NJ 1981 to 1983
Diploma in General & College Preparation
Plainfield High School - Plainfield, NJ 1978 to 1982
Skills
Analysis skills
Calibration
Electrical Experience
Maintenance
Technical Support
Blueprint Reading
Service Technician Experience
Equipment Repair
ISO 9001
Preventive Maintenance
PDM tools
Firmware
Microsoft Office
Quality Control
Waite Wireless
Electrical systems
English
FDA Regulations
Electrical
Programmable logic controllers
PLC
Mechanical Knowledge
OEM
Hydraulics
Schematics
Field Service
Troubleshooting
Conveyor installation
Mechanic Experience
Sensors Photo Eyes
CMMS
Manufacturing
Sensors
Schematics
Laboratory experience
SAP
Ultrasonic
Pneumatics
Strobe
Research & Development
Microsoft Word
Hand tools
Proximity Sensors
Firmware
Quality Assurance
Industrial mechanic experience
Precision measuring instruments
Industrial maintenance
Links
http://www.linkedin.com/pub/clayton-waters/28/514/31a
Certifications and Licenses
RME - NFPA 70e - CBT Completed & Certified
November 2020 to Present
RME- Resetting Breakers
Safe Work Practices Robot Cell Safety 101 Training Robot Cell Safety 102 Training
Waite Wireless Software PDM Tools
RME Control Cabinets TAC 101 RME Control Cabinets TAC 201 RME Maintenance Essentials Skills Bootcamp
Essentials Craft Skills 2 Identifying & Cutting Common Failures
CMMS (Computerized Maintenance Management Systems)
September 2019 to October 2022
RME Root Cause Analysis
May 2020 to October 2022
Contact this candidate